Zwiss Plate V2

More images

  • Zwiss Plate V2
Click to enlarge
Zwiss Plate V2
Product ID : Z-ZWP2
Price: $175.00
E-mail to a friend | Add To Wish List

Purchase

Description

The Zacuto Zwiss Plate V2 has multiple mounting options for various recorders and specific hole patterns for battery plates. The Zwiss Plate V2 has all the holes labeled to easily identify the correct hole pattern for various devices. It allows you to mount articulating arms, rods, battery plates, converter boxes and various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate V2 has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate V2 is also designed to work with our Wireless Plate Pro for mounting multiple wireless receivers or other small devices.

You can use the Zwiss Plate V2 to mount a variety of accessories or V-mount or 3 Stud battery plates and batteries. The battery plate and battery mounted on the Zwiss Plate V2 also acts as a counterbalance. Our Zamerican quick release arms mount directly into the 15mm holes of the plate and are perfect for mounting lights, monitors and audio devices. With plenty of ¼” 20 and 3/8” 16 holes on the Zwiss Plate V2, your mounting options are limitless.

Please note below when ordering if you are using this with the QRC-CA940 for the C300 or C500 or the Codex Onboard S 4K Recorder as you will need extra screws.

The Zwiss Plate V2 has labeled screw holes to attach the following accessories :
Zacuto Wireless Plates – WP
Zacuto Minimount so the Zwiss Plate V2 can be changed to a horizontal orientation – MM
AJA Ki Pro Mini Recorder – AJA
AJA Ki Pro QUAD
Codex Onboard S 4K Recorder – CDX
Anton Bauer QRC Digital Battery Plate – QRD
Switronix or IDX V-Mount Battery Plate – VMT
Anton Bauer QR GOLD Battery Plate – QR
Anton Bauer QRC GOLD Battery Plate – QRC
Switronix Jetpack Battery Plates – JTP
Vect V-Mount Battery Plate - VCT

Product Reviews

Login or Register to write the first review.

Product Videos

Products You May Like

Product ID : Z-ZLM
Attach a male and female 15mm rod together at a right angle with our Zrod Lock Mount.
$65.00
Product ID : Z-MM1
The MiniMount slides onto a set of 15mm lightweight spaced rods to act as a brace between rods or to create a simple rod or articulating arm mount.
$175.00
Product ID : ZM-3
The ZicroMount 3 is used to mount a device with a ¼” 20 screw hole to a 15mm rod or articulating arm. It is recommended for larger monitor or a Beacktek.
$92.00
$13.95
Converts a 3/8 16" screw to a 1/4 20" screw.
$13.95
Product ID : ZUD 3/8 16
A ZUD 3/8 16 is a short female rod that ends in a 3/8 16 screw hole. It is primarily used to retrofit a Noga or Israeli arm that ends in a 3/8 16 screw to a...
$44.00