ZUD 1/4 20

More images

  • ZUD 1/4 20
Click to enlarge
ZUD 1/4 20
Product ID : ZUD1/4 20
Price: $44.00
E-mail to a friend | Add To Wish List



A ZUD 1/4 20 is a short female rod that ends in a ¼ 20 screw hole. It is primarily used to retrofit a Noga or Israeli arm (or similar) that ends in a ¼ 20 screw to a rod end so you can use a Zacuto quick release mount. It can also be used to mount an accessory that attaches with a male ¼ 20 screw. The ZUD tightens to your arm or accessory with a small Allen screw. The Zud is threaded on the inside so it can be extended with a Zacuto male rod of any length. Use a Zube to keep the rods tight and stop them from spinning.

Product Reviews

Login or Register to write a review.
Reviewed by zedd
zedd bought "ZUD 1/4 20" on our website
12/07/2015 - 12:30:10 PM
Excellent little ZUD
This thing is great. I use it with an arm, and there's no more loosening.

Top notch, as always!
Reviewed by mojo3467
10/17/2015 - 01:03:21 PM
Zud 1/4 20
Are you sick of using static arms to mount your audio or EVF monitor to your rig only to bump it and have flip as the weight of the gear act as a pendulum unloosing the screws and relocating your gear that you just located to the perfect position for use.

Look no more I love this device it has a has an Ellen wrench screw that lock it down so it can twist unloose. I use this device on my Movi M5 it lock down my Zacudo ENG grip locator to my Handle bar, its rock solid.

It expensive but well worth the money!
Jeff Modjeska
Reviewed by ryantscott
ryantscott bought "ZUD 1/4 20" on our website
05/26/2015 - 04:41:49 PM
Perfect little thread attachment
I've used two of these to attach Zacuto equipment to my MÅ

Products You May Like

Product ID : Z-MO-2
The Z-Mount 2 connects two 15mm rods at a right angle with a quick release lever for each rod.
Product ID : ZUD 3/8 16 M
A ZUD 3/8 16 MALE is a short female rod that ends in a ¼ 20 male screw. It is primarily used to mount a 3/8 16 accessory to a rod with a Zacuto quick...
Product ID : Z-ZENGS
This 6" arm kit is designed to go between a 1/4 20 screw and a 1/4 20 screws. It's usually used to attach a monitor to the top of a camera or camera handle.
Product ID : ZARM-S3
This is our small 6" articulating Zamerican Arm. There is a ball joint on both ends that ends in a threaded female 15mm rod.
Converts a 1/4 20" screw to a 3/8 16" screw.
Product ID : Z-DADPT
The Half Inch Adapter adapts a Zacuto rod or zamerican arm from 15mm to either a ¼” 20 or ⅜” 16 male screw.