ZicroMount 3

More images

  • ZicroMount 3
Click to enlarge
ZicroMount 3
Product ID : ZM-3
Price: $92.00
E-mail to a friend | Add To Wish List



The ZicroMount 3 is used to mount any device with a ¼” 20 or a 3/8”16 (with a 3/8 16 to 1/4 20 Screw Adapter) screw hole. The Zicromount 3 is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, or an articulating arm or Zud. (A Zud is a short rod with either a 1/4 20 or 3/8 16 screw or screw hole on one end.) The Zicromount 3 also has L shaped claws to prevent a monitor from turning and unwinding.

An optional second ¼ 20 screw can be added if necessary as can an optional camera mounting pin. You may want to add one of these if you’re using the Zicromount 3 as a platform under your small camera to attach a handgrip on a rod.

Product Reviews

Login or Register to write a review.
Reviewed by ajvmedia
03/04/2016 - 02:54:48 PM
This mount is essential for any field monitor rig. The simple fact that it clamps down onto a standard 15mm rod means it simply stay put and doesn't swivel when you don't want it to. Screw-on mounts are terrible, and this keeps the mount firmly attached to the Zamerican Arm. The ratcheting lever makes securing the mount onto the arm a breeze. And then the two fangs on the front prevent the monitor from swiveling on the attaching screw. It's simple and perfect. Highly recommended!
Reviewed by mojo3467
10/26/2015 - 12:20:26 PM
ZicroMount 3
As some of the other reviews mention If you own a monitor and are tired of tightening it over and over again to lock it in position this is the device you have been waiting for. You can also turn the two silver and black brackets down and use it to mount any other 1/4-20 devise with it and well!

I would high recommend this devise!
Reviewed by Orchard
05/04/2015 - 12:23:59 PM
Great on Odyssey 7Q+
This mount works great with our 7Q+. The 1/4"-20 is in a perfect place for the monitor and the 2 stabilizing pegs keep the monitor from rotating. We've also used them with older Panasonic 8" monitors and they worked great.
Reviewed by professor.z
02/27/2015 - 11:14:09 AM
you must have this for a monitor
I just bought a large field monitor/recorder for my Zacuto rig. I attach the monitor with the ZicroMount 3. It is THE only solution I know of to keep the monitor from swiveling on the rod arm. For such a small piece of equipment it is incredibly sturdy and reliable. I completely trust my expensive monitor's safety with the ZicroMount 3!

Products You May Like

Product ID : Z-MO-ZW2
The Z-Mount Zwivel 2 attaches two 15mm rods at multiple different angles with independently controlled levers.
Product ID : ZARM-S3
This is our small 6" articulating Zamerican Arm. There is a ball joint on both ends that ends in a threaded female 15mm rod.
Converts a 1/4 20" screw to a 3/8 16" screw.
Product ID : ZUD1/4 20
A ZUD 1/4 20 is a short female rod that ends in a ¼ 20 screw hole. It is primarily used to retrofit a Noga or Israeli arm that ends in a ¼ 20 screw to a...
Product ID : Z-ZHH
Zonitor Handheld Kit for 15mm Rod connects a 1/4 20 accessory or light to either a 15mm rod. Purchase One Today!
Product ID : Z-ZLM
Attach a male and female 15mm rod together at a right angle with our Zrod Lock Mount.