Zicro Micro

More images

  • Zicro Micro
Click to enlarge
Zicro Micro
Product ID : Z-ZMCR
Price: $55.00
E-mail to a friend | Add To Wish List

Purchase

Description

The Zicro Micro is used to mount any device with a ¼” 20 or a 3/8”16 (with a 3/8 16 to 1/4 20 Screw Adapter) screw hole. The Zicro Micro is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, or an articulating arm or Zud. (A Zud is a short rod with either a 1/4 20 or 3/8 16 screw or screw hole on one end.) The 1/4" 20 screw has an adjustable position to hold any accessory. This mount is less than half an inch thick. The lever is the new Mini Ratcheting Lever, which works in the same manner as the Ratcheting Lever, but with a smaller footprint allowing the mount to be used in tight spaces. The Zicro Micro also has L shaped claws to prevent a monitor from turning and unwinding. These claws can be moved or removed altogether to accommodate any situation.

Recommended Accessories:
Zamerican Arm V3 Large
Zamerican Arm V3 Small
Zud 1/4 20

Product Reviews

Login or Register to write a review.
Reviewed by NBCP
NBCP bought "Zicro Micro" on our website
12/20/2015 - 09:24:11 PM
A Great Monitor Mount to have as a tool
When attaching a monitor to a camera rig, you want a strong, long lasting mount; this is what the Zicro Micro does perfect.

I have attached my Atomos Ninja Blade and Shogun to the Zicro Micro. Itâ
Reviewed by keilproductions
keilproductions bought "Zicro Micro" on our website
11/24/2015 - 07:05:01 PM
Easy and Secure Rigging
I bought this to attach my Sony FS7 monitor to a Zamerican arm. This little piece of equipment is very secure and easy to use. Mount it to any 1/4"-20 mounting point, insert a 15mm rod into the clamp, and lock it down with a twist of the lever. I have only 1 moderate complaint: the metal in the flathead screw seems kind of cheap, and is already a bit dinged. It's only a cosmetic issue, but I wonder how it will do in the long run. Overall, a great product, if a bit pricey for what it really is.
Reviewed by professor.z
08/17/2015 - 05:25:02 PM
works with my Shogun
I use this this to attach my Atomos Shogun monitor to my Zamerican arm. You wouldn't think that such a small piece would make such a huge difference but it is critical in stabilizing my monitor so it doesn't swivel around out of place. I can also confidently mount the Shogun to either the top or the bottom of the arm so it is either suspended from above or supported from below by the Zicro Mount. It is completely secure and it adds flexibility to the way I can use my very expensive external monitor.
Reviewed by Dannoyes
Dannoyes bought "Zicro Micro" on our website
04/28/2015 - 12:43:15 PM
Good quality in small package
It works for me to mount an extra monitor to my recoil. Good build in a small package.

Products You May Like

$13.95
Product ID : Z-MZR
Install one of these on each of your ¼ 20” devices and use our Zamerican Z-Rail Arm!
$20.00
Product ID : Z-QML
The Zacuto Q-Mount for 15mm lightweight spaced rods clamps onto 15mm rods to create a stable mount for a lens support, articulating arm or 15mm rod.
$198.00
Product ID : Z-ZHH
Zonitor Handheld Kit for 15mm Rod connects a 1/4 20 accessory or light to either a 15mm rod. Purchase One Today!
$365.00
Product ID : ZUD 3/8 16 M
A ZUD 3/8 16 MALE is a short female rod that ends in a ¼ 20 male screw. It is primarily used to mount a 3/8 16 accessory to a rod with a Zacuto quick...
$49.00
Product ID : Z-ZENGS
This 6" arm kit is designed to go between a 1/4 20 screw and a 1/4 20 screws. It's usually used to attach a monitor to the top of a camera or camera handle.
$305.00