ACT Recoil!
New Kameleon Pro EVF
NEW Canon C500 Mark II
                                             

Z-Arms & Mounts

Product ID : Z-ZRN
The Zarn, inspired by filmmaker Clinton Harn, is a railed mounted wood ball shaped handgrip. It slides onto any Z-Rail, or any compatible rail*
$95.00
Product ID : Z-SARM
The Zamerican Z-Rail Small Arm is a 6” articulating arm that has two Z-Rail clamps on either end.
$165.00
Product ID : Z-LARM
The Zamerican Z-Rail Arm is a 12” articulating arm that has two Z-Rail clamps on either end.
$175.00
Product ID : Z-MZR
Install one of these on each of your ¼ 20” devices and use our Zamerican Z-Rail Arm!
$20.00
$13.95
$13.95
Product ID : Z-DADPT
The Half Inch Adapter adapts a Zacuto rod or zamerican arm from 15mm to either a ¼” 20 or ⅜” 16 male screw.
$15.00
Product ID : Z-ZMCR
The Zicro Micro is used to mount an accessory with a 1/4" 20 screw hole to a 15mm rod or Zamerican Arm.
$55.00
Product ID : Z-MO-ZW2
The Z-Mount Zwivel 2 attaches two 15mm rods at multiple different angles with independently controlled levers.
$95.00
Converts a 1/4 20" screw to a 3/8 16" screw.
$13.95
Converts a 3/8 16" screw to a 1/4 20" screw.
$13.95
Product ID : ZUD 3/8 16 M
A ZUD 3/8 16 MALE is a short female rod that ends in a ¼ 20 male screw. It is primarily used to mount a 3/8 16 accessory to a rod with a Zacuto quick...
$49.00
Product ID : ZUD 3/8 16
A ZUD 3/8 16 is a short female rod that ends in a 3/8 16 screw hole. It is primarily used to retrofit a Noga or Israeli arm that ends in a 3/8 16 screw to a...
$44.00
Product ID : Z-QML
The Zacuto Q-Mount for 15mm lightweight spaced rods clamps onto 15mm rods to create a stable mount for a lens support, articulating arm or 15mm rod.
$198.00
Product ID : Z-MMA
The 15mm Studio MiniMount slides onto a set of 15mm studio spaced rods to act as a brace between rods or to create a simple rod or articulating arm mount.
$190.00
Product ID : Z-MM1
The MiniMount slides onto a set of 15mm lightweight spaced rods to act as a brace between rods or to create a simple rod or articulating arm mount.
$175.00
Product ID : Z-ZENGL
This 12" arm kit is designed to go between a 1/4 20 screw and a 1/4 20 screws. It's usually used to attach a monitor to the top of a camera or camera handle.
$325.00
Product ID : Z-ZENGS
This 6" arm kit is designed to go between a 1/4 20 screw and a 1/4 20 screws. It's usually used to attach a monitor to the top of a camera or camera handle.
$305.00