|
#321 |
|
Zamerican, V3 Large
Zamerican, V3 Large 12 inch articulating arm is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk. The central red knob controls the central pivot point and the ball joints on either end of the arm.
Zacuto articulating arms end in threaded 15mm female rod ends. This ‘Z-Release’ technology allows you to use any of our Z-Release mounts to quick release between your accessories and the articulating arm. No more screwing and un-screwing and no more coming loose. Our Zacuto quick release red levers (often ratcheting levers) make set up and break down as well as quick moves on set a breeze.
You can see all our Z-Release mounts here.
Our price: $215.00 |
|
|
Amount: |
|
|
#355 |
|
Zicromount III
The ZicroMount III is used to mount any device with a ¼ 20” or a 3/816” inch (with a ¼ 20” to 3/8 16” adapter) screw hole. The Zicromount III is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, threaded articulating arm with Zacuto ZUDS or Zamerican Arm. The Zicromount III has the ability to attach to the device using two screws. The Zicromount III also has L shaped claws to prevent devices from turning and unwinding.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $92.00 |
|
|
| Camera Mounting Pin |
|
| 1/4 20 |
|
|
|
Amount: |
|
|
#315 |
|
Z-Mount II
The Z-Mount II connects two 15mm rods set at a right angle. Each rod port is controlled separately by a Zacuto Z-release ratcheting lever. The Z-Mount II can also accept a Zacuto Zamerican Arm end. This piece is perfect for attaching an articulating arm to your baseplate, handles or anywhere else on a 15mm rod system.
Other uses include creating a right angle shoulder pad to camera offset as in our Fast Draw kit. Attaching a single handle to a baseplate like in our Z-Grip Z-Mount or making a quick lens support as displayed in the detailed product photos with a short rod and a 1/4 20 or 3/8 16 adapter. The Z-Mount II has so many useful applications and is a great a la carte piece to keep in your camera bag for emergencies!
Our 15mm/19mm version of this is called a Zandy (Named after product designer and Sales VP Mandy Rogers!)
Our 19mm/19mm version of this is called a Ztudio.
Our price: $100.00 |
|
|
Amount: |
|
|
#194 |
|
Zround Mount
The Zround Mount is a retrofit to allow Zacuto DoubleMounts and MiniMounts to accept Z-Release Zamerican arm or ZUDS. ZUDs convert your 1/4 20", 3/8 16" screws to 15mm rods, thus allowing them to fit into Z-Mounts, 15mm Z-Locks, ZicroMounts and all other Zacuto 15mm locking devices. This gives quick release action to your Zacuto DoubleMount or MiniMount. The Zround Mount comes with a 3/8 16" and does not include DoubleMount, Zamerican arm or ZUD.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $120.00 |
|
|
Amount: |
|
|
#305 |
|
Q-Mount Lightweight
Zacuto's univeral Z-Release mount for 15mm lightweight rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount lightweight has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $198.00 |
|
|
Amount: |
|
|
#353 |
|
Studio 15mm Q-Mount
Zacuto's univeral Z-Release mount for 15mm studio offset rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 15mm studio has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00 |
|
|
Amount: |
|
|
#307 |
|
Studio 19mm Q-Mount
Zacuto's univeral Z-Release mount for 19mm studio rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 19mm studio has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00 |
|
|
Amount: |
|
|
#481 |
|
Zano
The Zano is a combination of the Manfrotto Nano Clamp and the Zacuto Zicromount. The Zano allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zano onto such as tripod legs. The Zano clamp range is .51" to 1.38".
Our price: $95.00 |
|
|
Amount: |
|
|
#479 |
|
Zaffer
Many people have been asking for it and now it's here. The Zaffer is a combination of the Manfrotto Super Clamp and the Zacuto Zicromount. The Zaffer allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zaffer on to, such as tripod legs. The Zaffer clamp range is .51" to 2.1".
Our price: $99.00 |
|
|
Amount: |
|
|
#631 |
|
Zwiss Plate
The Zacuto Zwiss Plate is Zacuto’s multi-purpose mounting plate. It allows you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. A second set of rods can be mounted through the top of the plate if you wish to extend your rig at another level. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate is also designed to work with our new Wireless Plate for mounting multiple wireless receivers.
You can use the Zwiss Plate to mount a variety of accessories or brick style batteries and battery plates. The Zwiss Plate works with both Anton Bauer 3-Stud and V-Mount style batteries. The battery plate and battery mounted on the Zwiss Plate can double as counterbalance. You can still add more counterbalance by adding our Z-Lite weights to the back of the rig along with the Zwiss Plate. Our Zamerican quick release arms mount directly into the 15mm holes of the plate and are perfect for mounting lights, monitors and audio devices. It now comes with the (4) screws needed to mount the AJA Ki Pro Mini. With plenty of ¼ 20” and 3/8 16” holes, your mounting options are limitless.
Our price: $149.00 |
|
|
Amount: |
|
|
#633 |
|
Zicro Mini
The Zicro Mini is similar to our Zicromount & Zicromount III, except it is much thinner. The Zicro Mini was made specifically for the Zacuto EVF. It is included in the EVF Standard Mount, EVF Rod Mount and EVF Tri-Mount Kit. The Zicro Mini is a universal quick release mount that allows you to attach anything with a ¼” 20 screw hole to a 15mm rod. This includes Zacuto’s articulating arm series, the Zamerican Arms. The Zicro Mini is only recommended for smaller lightweight devices such as an EVF, LED light or small sound recorder like the Zoom H4N. It is not recommended for larger (6”+) monitors. For larger monitors, we recommend the Zicromount III.
Our price: $50.00 |
|
|
Amount: |
|
|
#192 |
|
ZUD 1/4 20
A ZUD 1/4" 20 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00 |
|
|
Amount: |
|
|
#244 |
|
ZUD1/4 20 M
A ZUD 1/4" 20 male (retrofit any 1/4 20 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $49.00 |
|
|
Amount: |
|
|
#243 |
|
ZUD 3/8 16 M
A ZUD 3/8" 16 male (retrofit any 3/8 16 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $49.00 |
|
|
Amount: |
|
|
#193 |
|
ZUD 3/8 16
A ZUD 3/8" 16 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00 |
|
|
Amount: |
|
|
|