|
#326 |
|
Zamerican Jr. Small
CLEARANCE
BIG SAVINGS!!
Was $165 now $120
LIMITED QUANTITIES
Zamerican Jr. Small 5 inch articulating arm with one ball pivot is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Savings included in price below. Was $165 now $120.
Our price: $120.00 |
|
|
Amount: |
|
|
#355 |
|
Zicromount III
The ZicroMount III is used to mount any device with a ¼ 20” or a 3/816” inch (with a ¼ 20” to 3/8 16” adapter) screw hole. The Zicromount III is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, threaded articulating arm with Zacuto ZUDS or Zamerican Arm. The Zicromount III has the ability to attach to the device using two screws. The Zicromount III also has L shaped claws to prevent devices from turning and unwinding.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $92.00 |
|
|
| Camera Mounting Pin |
|
| 1/4 20 |
|
|
|
Amount: |
|
|
#315 |
|
Z-Mount II
The Z-Mount II connects two 15mm rods set at a right angle. Each rod port is controlled separately by a Zacuto Z-release ratcheting lever. The Z-Mount II can also accept a Zacuto Zamerican Arm end. This piece is perfect for attaching an articulating arm to your baseplate, handles or anywhere else on a 15mm rod system.
Other uses include creating a right angle shoulder pad to camera offset as in our Fast Draw kit. Attaching a single handle to a baseplate like in our Z-Grip Z-Mount or making a quick lens support as displayed in the detailed product photos with a short rod and a 1/4 20 or 3/8 16 adapter. The Z-Mount II has so many useful applications and is a great a la carte piece to keep in your camera bag for emergencies!
Our 15mm/19mm version of this is called a Zandy (Named after product designer and Sales VP Mandy Rogers!)
Our 19mm/19mm version of this is called a Ztudio.
Our price: $100.00 |
|
|
Amount: |
|
|
#194 |
|
Zround Mount
The Zround Mount is a retrofit to allow Zacuto DoubleMounts and MiniMounts to accept Z-Release Zamerican arm or ZUDS. ZUDs convert your 1/4 20", 3/8 16" screws to 15mm rods, thus allowing them to fit into Z-Mounts, 15mm Z-Locks, ZicroMounts and all other Zacuto 15mm locking devices. This gives quick release action to your Zacuto DoubleMount or MiniMount. The Zround Mount comes with a 3/8 16" and does not include DoubleMount, Zamerican arm or ZUD.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $120.00 |
|
|
Amount: |
|
|
#305 |
|
Q-Mount Lightweight
Zacuto's univeral Z-Release mount for 15mm lightweight rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount lightweight has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $198.00 |
|
|
Amount: |
|
|
#353 |
|
Studio 15mm Q-Mount
Zacuto's univeral Z-Release mount for 15mm studio offset rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 15mm studio has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00 |
|
|
Amount: |
|
|
#307 |
|
Studio 19mm Q-Mount
Zacuto's univeral Z-Release mount for 19mm studio rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 19mm studio has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00 |
|
|
Amount: |
|
|
#481 |
|
Zano
The Zano is a combination of the Manfrotto Nano Clamp and the Zacuto Zicromount. The Zano allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zano onto such as tripod legs. The Zano clamp range is .51" to 1.38".
Our price: $95.00 |
|
|
Amount: |
|
|
#479 |
|
Zaffer
Many people have been asking for it and now it's here. The Zaffer is a combination of the Manfrotto Super Clamp and the Zacuto Zicromount. The Zaffer allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zaffer on to, such as tripod legs. The Zaffer clamp range is .51" to 2.1".
Our price: $99.00 |
|
|
Amount: |
|
|
|
