|
|
|
Doublemount and Red Plate
|
See details
|
|
SKU: Z-DMRP
CLEARANCE
BIG SAVINGS!!
Was $365 now $225
LIMITED QUANTITIES
The Doublemount and Red plate combo allows you to mount your battery plate to your rod system horizontally. The DoubleMount includes 7" rods and can accept two Zround Mounts in the middle holes for mounting a Zacuto Articulating Arm. The Red Plate screws into the bottom of the Doublemount and allows you to mount a V-Mount or 3-Stud Anton Bauer battery plate. Now you can mount your professional brick style batteries to your rig horizontally for counterbalance. The Red Plate allows you to mount our Wireless Plate or Wireless Plate Pro to hold your wireless receivers. If you want to mount your pro batteries vertically, check out our Zwiss Plate.
Savings included in price below. Was $365 now $225.
Our price: $225.00
|
|
|
|
|
|
DoubleMount, V3, includes 7" rods
|
See details
|
|
SKU: Z-DM3
CLEARANCE
BIG SAVINGS!!
Was $235 now $150
LIMITED QUANTITIES
Zacuto is the first to invent a device that has rods going off the back of a camera. This invention allows us to balance front heavy camera packages while adding mounting options for articulating arms, wireless plates and 12 volt battery power.
Savings included in price below. Was $235 now $150.
Our price: $150.00
|
|
|
|
|
|
QR Shoulder Pad
|
See details
|
|
SKU: Z-QRSP
The QR Shoulder Pad is a completely universal curved, padded shoulder pad system. The shoulder pad is designed to sit directly under your camera or baseplate putting the camera on top of your shoulder as in a traditional ENG style set up. We call this our Recoil system and it can be adapted to most every type of camera. Having your camera directly on your shoulder eliminates the need for counterbalance which means your kit can be lighter and shorter.
Our price: $355.00
|
|
|
|
|
|
QR Dovetail
|
See details
|
|
SKU: Z-QRDV
Use this extra QR Dovetail plate to move your QR Shoulder Pad quickly back and forth between cameras. The dovetail plate comes with one (1) ¼ 20 and one (1) 3/8 16 screw in sliding tracks that allows you to position the plate at any point under your baseplate or camera for comfort and balance. The QR Shoulder Pad attaches, positions, and detaches from the dovetail plate with a quick release lever. The dovetail plate can act as a tripod plate and snap directly into a quick release plate on your tripod, monopod, slider or other standard piece of equipment.
Our price: $38.00
|
|
|
|
|
|
Shoulder Pad (no rods)
|
See details
|
|
SKU: Z-SPD
Zacuto’s original Shoulder Pad with no rods. Any 15mm aluminum rods will fit into the grooves of the Shoulder Pad. With the addition of rods, you can mount the Shoulder Pad behind your baseplate or underneath your rod system using our Q-Release. If you need to offset your rig to position your viewfinder comfortable in your eye, you can use our Zoffset to move the camera to the right or left of the pad. The Shoulder Pad is 5 ¾” long.
Our price: $180.00
|
|
|
|
|
|
Shoulder Pad, includes 7-inch rods
|
See details
|
|
SKU: Z-SP1
The shoulder pad can be mounted three different ways; it can screw into Zacuto rod extensions, it can be mounted directly underneath your rod system to achieve counterbalance with DOF camera rigs by using a Zacuto Q-release or it can be used in conjunction with the Zacuto Zoffset. The Zoffset is used with professional camcorders that have the viewfinders positioned in the center in order to have your eye positioned comfortably in the viewfinder.
The Shoulder Pad includes 7” rods.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00
|
|
|
|
|
|
Scorpion Shoulder Assembly
|
See details
|
|
SKU: Z-DSPA
The Scorpion Shoulder Assembly is an all-in-one shoulder pad system for an in-line Zacuto DSLR Baseplate kit. It is best used for traditional ENG style shooting with our EVF or a small monitor. It includes a curved Akton Polymer shoulder pad, adjustable top handle, and rods to connect the entire assembly to the back of your Zacuto DSLR Baseplate as well as rods to add a counterbalance weight, such as our Z-Lite.
The curved form-fitting Akton Polymer pad is a unique design built for ultimate comfort. The pad cushions your shoulder and positions a counterbalance low down behind your shoulder to counteract the weight in the front, resulting in a tremendously comfortable rig, perfect for long shoots. The entire assembly can also be articulated in multiple directions thanks to the built in innovative ball joint feature at the front of the pad. Adjusting the angle of the pad is extremely important for individual comfort. Another great feature is the built in top handle. The handle is great for taking your rig on and off of your shoulder, low mode shooting and easy carrying. The handle can be custom positioned up or down into the pad itself with the turn of a lever.
The pad assembly connects to the back of the Zacuto DSLR Baseplate via (2) 1” M/F rods. These rods screw into the back of the baseplate and connect to the shoulder pad itself via 15mm quick release ports. This quick release system allows you to quickly switch from handheld to tripod. The shoulder assembly also includes (2) 3.5” M/F rods in the back so you can easily add any 15mm accessory for counterbalance such as our Z-Lite or Zwiss Plate (with a battery plate and pro brick batteries facing away from the pad). The amount of counterbalance you add in the back is determined by the a...
Our price: $1,040.00
|
|
|
|
|
|
Zoffset
|
See details
|
|
SKU: Z-Off
The Zoffset is used in conjunction with the Zacuto Shoulder Pad. It allows you to shift the lightweight support rods 3 inches to the right and 2 inches up, thus enabling you to position your eye comfortably in the viewfinder of most palm camcorders that have viewfinders in the back and center. It is meant to be used as part of a Zacuto Universal Baseplate System.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $255.00
|
|
|
|
|
|
Q-Release
|
See details
|
|
SKU: Z-QR
The Q-Release allows you to mount the Zacuto Shoulder Pad underneath your camera for better counter-balance when using a Depth-of-field adapter or camera package lengths up to 36 inches. It allows you to move the center of gravity forward. It also has a handy quick release that allows you to quickly mount and un-mount the shoulder pad. The Q-Release can attach to a set of 15mm lightweight rods and accepts 15mm male threaded rods ends to hold the shoulder pad or other accessory.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $175.00
|
|
|
|
|
|
Z-Lite
|
See details
|
|
SKU: Z-LTE
The Z-lite is a (just under) 3.5 lb. counterbalance weight to balance camera packages that are slightly front heavy. It slides onto 15mm rods, either both rods or on one rod. The Z-Lite is stainless steel with rubber o-rings to prevent hard contacts. A built in lever makes for easy mounting and removal. The Z-lite is great for DSLR packages.
Our price: $185.00
|
|
|
|
|
|
Z-Lite Double
|
See details
|
|
SKU: Z-LTE-D
The Z-Lite Double is a 7lb counterbalance weight to balance camera packages that are slightly front heavy. It slides onto 15mm rods, either both rods or on one rod. The Z-Lite is stainless steel with rubber o-rings to prevent hard contacts. A built in lever makes for easy mounting and removal. The Z-Lite is great for DSLR packages. If you need less weight check out our Z-Lite and if you need more weight check out our Z-Lite Double Kit.
Our price: $212.00
|
|
|
|
|
|
Z-Lite Double Kit
|
See details
|
|
SKU: Z-LTE-DK
The Z-Lite Double Kit is a combination of our Z-Lite and Z-Lite Double. It comes with (2) 7" M/F Rods. The Kit is a total of 11lbs of counterbalance weight to balance camera packages. The good thing about the kit is you can have a 3.5lb counterbalance weight, 7lb counterbalance weight or a 10.5lb counterbalance weight depending on your camera rig. It slides onto 15mm rods, either both rods or on one rod. The Z-Lite is stainless steel with rubber o-rings to prevent hard contacts. A built in lever makes for easy mounting and removal. If you need less weight check out our Z-Lite and Z-Lite Double.
Our price: $335.00
|
|
|
|
|
|
Zwiss Plate
|
See details
|
|
SKU: Z-ZWP
The Zacuto Zwiss Plate is Zacuto’s multi-purpose mounting plate. It allows you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. A second set of rods can be mounted through the top of the plate if you wish to extend your rig at another level. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate is also designed to work with our new Wireless Plate for mounting multiple wireless receivers.
You can use the Zwiss Plate to mount a variety of accessories or brick style batteries and battery plates. The Zwiss Plate works with both Anton Bauer 3-Stud and V-Mount style batteries. The battery plate and battery mounted on the Zwiss Plate can double as counterbalance. You can still add more counterbalance by adding our Z-Lite weights to the back of the rig along with the Zwiss Plate. Our Zamerican quick release arms mount directly into the 15mm holes of the plate and are perfect for mounting lights, monitors and audio devices. It now comes with the (4) screws needed to mount the AJA Ki Pro Mini. With plenty of ¼ 20” and 3/8 16” holes, your mounting options are limitless.
Our price: $149.00
|
|
|
|
|
|
Zwiss Plate V2
|
See details
|
|
SKU: Z-ZWP2
The Zacuto Zwiss Plate V2 is similar to our standard Zwiss Plate in many ways but has extra mounting options for various recorders and specific hole patterns for more battery plates. The Zwiss Plate V2 also has all the holes labeled to easily identify the correct hole pattern for various devices. It allows you to mount articulating arms, rods, battery plates, converter boxes and various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate V2 has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate V2 is also designed to work with our Wireless Plate Pro for mounting multiple wireless receivers or other small devices.
You can use the Zwiss Plate V2 to mount a variety of accessories or V-mount or 3 Stud battery plates and batteries The battery plate and battery mounted on the Zwiss Plate V2 also acts as a counterbalance. Our Zamerican quick release arms mount directly into the 15mm holes of the plate and are perfect for mounting lights, monitors and audio devices. With plenty of ¼ 20” and 3/8 16” holes on the Zwiss Plate V2, your mounting options are limitless.
Our price: $175.00
|
|
|
|
|
|
Horizontal Zwiss Plate V2
|
See details
|
|
SKU: Z-HZWP2
The Horizontal Zwiss Plate expands upon our standard Zwiss Plate V2 with the addition of our Minimount (via two 10/32 Allen screws – included.) The Zwiss Plate can now be mounted horizontally on 15mm lightweight (60mm spaced) rails. This keeps a low profile kit and is great for tripod use. Now, all four quick release lever controlled rod ports are available to hold your accessories.
You can add rods, articulating arms, and even two of our Wireless Plate Pros to hold audio receivers or transmitters. The Horizontal Zwiss Plate V2 has multiple 3/8 16” and ¼ 20” holes to mount threaded accessories. It comes with the necessary screws to mount a V-Mount or 3 Stud/Gold Mount battery plate, Switronix jetpack, or the AJA Ki Pro Mini. One side of the plate takes the battery plate and the other can take the AJA. You can mount the Minimount to either side in order to use whichever side you need for your accessories. The Horizontal Zwiss Plate can also be mounted vertically in order to use both sides of the plate or for counterbalance with shoulder mounted kits.
Our price: $245.00
|
|
|
|
|
|
Zwiss Cage Plate
|
See details
|
|
SKU: Z-ZCP
The Zwiss Cage Plate is an 11" long cheese plate that includes multiple 1/4 20" and 3/8 16" mounting holes as well as (4) 15mm mounting holes on the ends for a variety of uses. It differs from our standard Zwiss Plate in length. This length is needed so it can be used to create a cage like the DSLR Z-Cage and would like to convert to a Zwiss Cage, this is the plate you are looking for. In addition, if you want the handles staggered as we show on the Zwiss cage, you will need to purchase (2) Z-Mount IIs to replace the Z-Mount Zwivels on the existing z- cage. The vertical handles on the Zwiss Cage are staggered as opposed to being parallel like on the DLSR Z-Cage for more stability. If you have any questions or need help converting your Z-Cage to a Zwiss Cage, feel free to give us a call or email sales@zacuto.com.
Our price: $160.00
|
|
|
|
|
|
Wireless Plate Pro
|
See details
|
|
SKU: Z-WPP
The Zacuto Wireless Plate Pro allows you to mount any size wireless, down-converter, video transmitter regardless of size, make, model or manufacturer with Velcro.
The Wireless plate can screw into the Zacuto Zwiss Plate, Zacuto Red Plate or can mount off a 15mm rod by using a Wireless bracket and a z-lock.
The Wireless Plate Pro is 3 5/8 x 3 5/8. The lip sticks out 1 3/8.
Our price: $55.00
|
|
|
|
|
|
Double Barrel Kickstand
|
See details
|
|
SKU: Z-DB-K
The Double Barrel kickstand is recommended for the DSLR Double Barrel Kit. It gives the rig a more stable footing when rested on the ground or flat surface, especially when the camera is loaded with many accessories such as follow focuses and matte boxes. It is all black.
Our price: $65.00
|
|
|
|
|
|
DSLR Handle
|
See details
|
|
SKU: Z-DSLR-H
The DSLR Handle is a sturdy versatile handle that mounts onto any 15mm rod system using our Z-mount Zwivel. It is the perfect solution for low mode shooting, lifting your rig on and off your shoulder, as well as a quick and easy way to carry your rig. The handle can swivel and slide so you can position it at the rigs center of gravity for perfect balance. You can also mount additional accessories onto the handle rod by using Z-mounts that will enable you to attach anything from a Zamerican arm, additional 15mm rods, lights and mics. The DSLR Handle is quick releasable from the rig by the twist of a lever. This is the perfect handle for all DSLR rig owners. The DSLR Handle is all black.
Our price: $250.00
|
|
|
|
|
|
|
|
|
|
|
|
