|
#315 |
|
Z-Mount II
The Z-Mount II allows you to mount a monitor or any device on a 15mm lightweight support rod. The Z-mount II is ideal for mounting a monitor to Zacuto Zgrips. This is a must for every DP or AC since it serves as a basic rigging device. The Z-mount II goes one step further by allowing a lens support to be mounted directly in the center of standard 15mm rail systems.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $100.00 |
|
|
Amount: |
|
|
#321 |
|
Zamerican, V3 Large
Zamerican, V3 Large 12 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $215.00 |
|
|
Amount: |
|
|
#355 |
|
Zicromount III
The ZicroMount III is used to mount any device with a ¼ 20” or a 3/816” inch (with a ¼ 20” to 3/8 16” adapter) screw hole. The Zicromount III is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, threaded articulating arm with Zacuto ZUDS or Zamerican Arm. The Zicromount III has the ability to attach to the device using two screws. The Zicromount III also has L shaped claws to prevent devices from turning and unwinding.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $92.00 |
|
|
| Camera Mounting Pin |
|
| 1/4 20 |
|
|
|
Amount: |
|
|
#191 |
|
ZicroMount
The ZicroMount is used for mounting monitors, hard drives or any device that accepts a ¼ 20" screw or a 3/8 16” screw (with a ¼ 20” to 3/8 16” adapter) to an articulating arm or 15mm rod end to give you quick release action. Does not include Zamerican arm or ZUD.
To prevent monitors from rotating, check out our Zicromount III.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $75.00 |
|
|
Amount: |
|
|
#387 |
|
Zandy
The Zandy allows you to mount a monitor, viewfinder, and many other devices using a Zamerican Arm off a 19mm studio rod. Ideal for mounting a monitor or the RED ONE EVF on a 19mm studio rod. If using an articulating arm, a ZUD is required. If you are looking to mount a device off a 15mm rod, check out the Z-Mount II.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $144.00 |
|
|
Amount: |
|
|
#633 |
|
Zicro Mini
The Zicro Mini is similar to our Zicromount & Zicromount III, except it is much thinner. The Zicro Mini was made specifically for the Zacuto EVF. It is included in the EVF Standard Mount, EVF Rod Mount and EVF Tri-Mount Kit. The Zicro Mini is a universal quick release mount that allows you to attach anything with a ¼” 20 screw hole to a 15mm rod. This includes Zacuto’s articulating arm series, the Zamerican Arms. The Zicro Mini is only recommended for smaller lightweight devices such as an EVF, LED light or small sound recorder like the Zoom H4N. It is not recommended for larger (6”+) monitors. For larger monitors, we recommend the Zicromount III.
Our price: $50.00 |
|
|
Amount: |
|
|
#679 |
|
Zwiss Cage Plate
Please allow 2-3 days to ship.
The Zwiss Cage Plate is an 11" long cheese plate that includes multiple 1/4 20" and 3/8 16" mounting holes as well as (4) 15mm mounting holes on the ends for a variety of uses. It differs from our standard Zwiss Plate in length. This length is needed so it can be used to create a cage like the DSLR Z-Cage and would like to convert to a Zwiss Cage, this is the plate you are looking for. In addition, if you want the handles staggered as we show on the Zwiss cage, you will need to purchase (2) Z-Mount IIs to replace the Z-Mount Zwivels on the existing z- cage. The vertical handles on the Zwiss Cage are staggered as opposed to being parallel like on the DLSR Z-Cage for more stability. If you have any questions or need help converting your Z-Cage to a Zwiss Cage, feel free to give us a call or email sales@zacuto.com.
Our price: $160.00 |
|
|
Amount: |
|
|
#192 |
|
ZUD 1/4 20
A ZUD 1/4" 20 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00 |
|
|
Amount: |
|
|
#244 |
|
ZUD1/4 20 M
A ZUD 1/4" 20 male (retrofit any 1/4 20 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $49.00 |
|
|
Amount: |
|
|
#243 |
|
ZUD 3/8 16 M
A ZUD 3/8" 16 male (retrofit any 3/8 16 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $49.00 |
|
|
Amount: |
|
|
#193 |
|
ZUD 3/8 16
A ZUD 3/8" 16 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00 |
|
|
Amount: |
|
|
|
