|
#539 |
|
Z-Lite Double
The Z-Lite Double is a 7lb counterbalance weight to balance camera packages that are slightly front heavy. It slides onto 15mm rods, either both rods or on one rod. The Z-Lite is stainless steel with rubber o-rings to prevent hard contacts. A built in lever makes for easy mounting and removal. The Z-Lite is great for DSLR packages. If you need less weight check out our Z-Lite and if you need more weight check out our Z-Lite Double Kit.
Our price: $212.00 |
|
|
Amount: |
|
|
#508 |
|
Z-Lite
The Z-lite is a (just under) 3.5 lb. counterbalance weight to balance camera packages that are slightly front heavy. It slides onto 15mm rods, either both rods or on one rod. The Z-Lite is stainless steel with rubber o-rings to prevent hard contacts. A built in lever makes for easy mounting and removal. The Z-lite is great for DSLR packages.
Our price: $185.00 |
|
|
Amount: |
|
|
#538 |
|
Z-Lite Double Kit
The Z-Lite Double Kit is a combination of our Z-Lite and Z-Lite Double. It comes with (2) 7" M/F Rods. The Kit is a total of 11lbs of counterbalance weight to balance camera packages. The good thing about the kit is you can have a 3.5lb counterbalance weight, 7lb counterbalance weight or a 10.5lb counterbalance weight depending on your camera rig. It slides onto 15mm rods, either both rods or on one rod. The Z-Lite is stainless steel with rubber o-rings to prevent hard contacts. A built in lever makes for easy mounting and removal. If you need less weight check out our Z-Lite and Z-Lite Double.
Our price: $335.00 |
|
|
Amount: |
|
|
#718 |
.jpg)
|
Scorpion Shoulder Assembly
Special Introductory Price of $975. Limited Time Only.
The Scorpion Shoulder Assembly is an all-in-one shoulder pad system for an in-line Zacuto DSLR Baseplate kit. It is best used for traditional ENG style shooting with our EVF or a small monitor. It includes a curved Akton Polymer shoulder pad, adjustable top handle, and rods to connect the entire assembly to the back of your Zacuto DSLR Baseplate as well as rods to add a counterbalance weight, such as our Z-Lite.
The curved form-fitting Akton Polymer pad is a unique design built for ultimate comfort. The pad cushions your shoulder and positions a counterbalance low down behind your shoulder to counteract the weight in the front, resulting in a tremendously comfortable rig, perfect for long shoots. The entire assembly can also be articulated in multiple directions thanks to the built in innovative ball joint feature at the front of the pad. Adjusting the angle of the pad is extremely important for individual comfort. Another great feature is the built in top handle. The handle is great for taking your rig on and off of your shoulder, low mode shooting and easy carrying. The handle can be custom positioned up or down into the pad itself with the turn of a lever.
The pad assembly connects to the back of the Zacuto DSLR Baseplate via (2) 2” M/F rods. These rods screw into the back of the baseplate and connect to the shoulder pad itself via 15mm quick release ports. This quick release system allows you to quickly switch from handheld to tripod. The shoulder assembly also includes (2) 3.5” M/F rods in the back so you can easily add any 15mm accessory for counterbalance such as our Z-Lite or Zwiss Plate (with a battery plate and pro brick batteries facing away from the pad). The amount of counterbalance you add in the back is determined by the amount of weight you have in front.
The Scorpion Shoulder Pad assembly is not recommended for offset rigs like our Double Barrel kit. It is meant to be used for in-line rigs (like the Scorpion) where your eye is positioned in the EVF.
Our price: $975.00 |
|
|
Amount: |
|
|
|
