Gratical Adventures! Gripper Series Batteries RunNGun Bundle

Z-Arms & Mounts

Zamerican, V3 Large
This is our large 12" articulating Zamerican Arm. There is a ball joint on both ends that ends in a threaded female 15mm rod.
$215.00
Zamerican, V3 Small
This is our small 6" articulating Zamerican Arm. There is a ball joint on both ends that ends in a threaded female 15mm rod.
$195.00
Z-Mount 2
The Z-Mount 2 connects two 15mm rods at a right angle with a quick release lever for each rod.
$100.00
Z-Mount Zwivel 2
The Z-Mount Zwivel 2 attaches two 15mm rods at multiple different angles with independently controlled levers.
$95.00
Zicro Micro
The Zicro Micro is used to mount an accessory with a 1/4" 20 screw hole to a 15mm rod or Zamerican Arm.
$55.00
ZicroMount
The ZicroMount is used for mounting monitors, hard drives,or any device that accepts a ¼” 20 screw to an articulating arm or 15mm rod end.
$75.00
$30.00
ZicroMount 3
The ZicroMount 3 is used to mount a device with a ¼” 20 screw hole to a 15mm rod or articulating arm. It is recommended for larger monitor or a Beacktek.
$92.00
Tri-Mount
The Tri-Mount attaches two quick release 15mm rod ports to the female end of a 15mm rod.
$120.00
MiniMount
The MiniMount slides onto a set of 15mm lightweight spaced rods to act as a brace between rods or to create a simple rod or articulating arm mount.
$175.00
Studio 15mm Minimount
The 15mm Studio MiniMount slides onto a set of 15mm studio spaced rods to act as a brace between rods or to create a simple rod or articulating arm mount.
$190.00
Q-Mount Lightweight
The Zacuto Q-Mount for 15mm lightweight spaced rods clamps onto 15mm rods to create a stable mount for a lens support, articulating arm or 15mm rod.
$198.00
1/2" Adapter
The Half Inch Adapter adapts a Zacuto rod or zamerican arm from 15mm to either a ¼” 20 or ⅜” 16 male screw.
$15.00
ZUD 1/4 20
A ZUD 1/4 20 is a short female rod that ends in a ¼ 20 screw hole. It is primarily used to retrofit a Noga or Israeli arm that ends in a ¼ 20 screw to a...
$44.00
ZUD 1/4 20 Male
A ZUD 1/4 20 MALE is a short female rod that ends in a ¼ 20 male screw. It is primarily used to mount a ¼ 20 accessory to a rod with a Zacuto quick release...
$49.00
ZUD 3/8 16
A ZUD 3/8 16 is a short female rod that ends in a 3/8 16 screw hole. It is primarily used to retrofit a Noga or Israeli arm that ends in a 3/8 16 screw to a...
$44.00
ZUD 3/8 16 Male
A ZUD 3/8 16 MALE is a short female rod that ends in a ¼ 20 male screw. It is primarily used to mount a 3/8 16 accessory to a rod with a Zacuto quick...
$49.00
Zotshoe
The Zotshoe connects to the hotshoe of a camera and converts it to a ¼ 20 screw hole to mount accessories that connect with a male ¼ 20 screw.
$69.00
ZRod Lock Mount
Attach a male and female 15mm rod together at a right angle with our Zrod Lock Mount.
$65.00