|
|
|
FC1 USB Focus Controller
|
See details
|
|
SKU: FC1
INSTANT SAVINGS!
$50 off regular price!
Was $400 now $350 for a limited time only
The FC1 USB Focus Controller gives the photo and video enthusiast a compact yet powerful device that enhances the capabilities of HD video enabled Canon EOS Digital SLR cameras. Like Canon's EOS Utility, the FC1 uses Canon's USB protocol to allow control of a wide range of functions, but without the limitations and bulk of being tethered to a computer. The device is handheld, weighing under 5 oz. including batteries, and less than 3" in diameter. It is connected to your camera with a standard mini-B to A USB cable, and can be used as a remote control or attached to a rig using a 1/4"-20 mount located on the back of the anodized aluminum enclosure.
The FC1 uses the autofocus motor in lenses to control focus, even while recording video. This also works in any Live View modes, which can be useful for photography. The HDMI output can still be used in tandem with the controller, as well. The nine other switches located around the central focus knob can be used to access important camera functions, such as video start/stop, digital zoom, saving focus points, and adjusting camera settings. If your intended use is as a remote control for a camera mounted on a crane or jib, the FC1 has been successfully tested with non-powered USB extension cables past 25 meters in length.
It is important that potential users understand how Canon's USB implementation affects the FC1. Certain characteristics of Canon's design make it perform quite differently than a mechanical follow focus, so it is recommended that you read the User Guide and the Canon USB Protocol article.
Camera Compatibility
•Canon EOS 1D Mark IV, 5D Mark II & III, 1DX, 7D, 6D, 60D, 600D, 550D, and 500D.
$50 discount already included. Just select ADD TO CART!
Our price: $350.00
|
|
|
|
|
|
MC1 USB Mini Controller
|
See details
|
|
SKU: MC1
The Okii MC1 is a wired USB remote, designed for Canon EOS Digital SLR cameras with video capability. Similar to the EOS Utility on a computer, the MC1 uses Canon's USB protocol to allow control of a wide range of abilities, but without the limitations and bulk of being tethered to a computer. When mounted near a rig handle, it provides easy access to camera functions such as video start/stop, digital zoom, and settings changes. The MC1 can also be used at longer distances (e.g., on a crane or boom) with non-powered USB extension cables. An optional automatic recording restart feature is included, which can stop and restart video recording at 11-minute intervals for long film sequences, or can act as a fail safe.
The MC1 is approximately 3" x 1.5" x .75" and weighs about 3 ounces. It connects to your camera with a standard mini-B to A USB cable (the same cable you use to connect your camera to a computer). Three 1/4"-20 mounting points on the top and sides are provided to secure the MC1 to a rig or handle, as shown below using a Function Micro Clamp:
Our price: $250.00
|
|
|
|
|
|
Okii Zgrip Bracket
|
See details
|
|
SKU: Z-OKGB
The Okii Zgrip bracket will connect the OKii MC1 USB Mini Controller directly to any Zacuto Zgrip. You connect it to the hand grip by taking out the small screws in the side of the grip and sandwiching this bracket in between the screws and the handle. The MC1 remote attaches via two Phillips screws. (Included.)
Our price: $18.00
|
|
|
|
|
|
Function Micro Clamp
|
See details
|
|
SKU: AC-009
The Micro Clamp, produced by Function (manufacturer of Okii's MC1 and FC1 USB controller enclosures and knobs), can be used to easily mount 1/4"-20 based accessories to any industry standard 15mm rod. The 1/4"-20 male mount has a locking wheel to tightly secure items such as external monitors, microphones, lighting and many other accessories.
Features:
•Extremely compact design
•Precision CNC machined from 6061 aluminum
•Bead blasted and anodized for durability
•1/4"-20 male mount with locking wheel is independent from 15mm clamping knob for convenience
Our price: $40.00
|
|
|
|
|
|
Function Telescopic Handle
|
See details
|
|
SKU: AC-015
The Function Telescopic Handle is designed to mount easily to any industry standard 15mm rod. The handle is 5" long and can be extended to 9.75" by utilizing a low-profile clamp just above the grip, allowing you to custom fit it to your rig for a more ergonomic setup. The handle can also be removed, which makes it possible to attach accessories to the 15mm extension rod. The included dual-ply rubber grip features soft gel like pads for improved comfort.
Features:
•5" Durable dual-ply rubber grip
•Extendable grip from 5" up to 9.75"
•Precision CNC machined from 6061 aluminum
•Black anodized for durability
•Mounts to 15mm rod
•Made in the USA
Specifications:
•Weight - 7.1 oz (201g)
•Grip diameter - 1.25" (3.2cm)
•Overall length compact - 6.75" (17.1cm)
•Overall length full extension - 11.5" (29.2cm)
Our price: $55.00
|
|
|
|
|
|
USB A to mini-B Camera Cable 6"
|
See details
|
|
SKU: AC-011
These are replacement USB A to mini-B cables, which can be used to connect any USB Controller directly to a camera. Approx 6 inches overall length.
Our price: $11.00
|
|
|
|
|
|
USB A to mini-B Camera Cable 36"
|
See details
|
|
SKU: AC-007
These are replacement USB A to mini-B cables, which can be used to connect any USB Controller directly to a camera. Approx 36 inches (1 meter) overall length.
Our price: $11.00
|
|
|
|
|
|
USB A to mini-B Camera Cable 18"
|
See details
|
|
SKU: AC-012
These are replacement USB A to mini-B cables, which can be used to connect any USB Controller directly to a camera. Approx 18 inches (0.5 meters) overall length.
Our price: $11.00
|
|
|
|
|
|
USB A to A Extension Cable 5 meter
|
See details
|
|
SKU: AC-008
These are 5 meter USB A to A extension cables, which can be used to extend the wired length of any USB Controller. Multiple extension cables can be connected together to increase the length to 25+ meters.
The use of these cables still requires a normal USB A to mini-B cable to connect to the camera.
A typical connection setup might be:
USB Controller > USB extension > USB extension > USB A to mini-B > Camera
Our price: $13.00
|
|
|
|
|
|
Extra Hardware for FC1
|
See details
|
|
SKU: AC-006
Replacement hardware set for the Okii FC1 USB Focus Controller. All screws are stainless steel.
Includes:
1x 1/16" Allen wrench
1x 5/64" Allen wrench
1x LED light pipe
1x Focus knob nylon washer
1x Focus knob set screw
2x Board mounting screws
2x Back plate screws
Our price: $11.00
|
|
|
|
|
|
|
|
|
|
|
|
