|
#578 |
|
Double Barrel
The Double Barrel is a shoulder mounted dual handheld system that uses our DSLR baseplate. The Double Barrel includes all black rods. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height. The baseplate attaches to your tripod plate using the standard tripod plate screws; (2) ¼ 20” and (1) 3/8 16”. Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own.
See customer reviews here!
Our price: $3,857.00 |
|
|
| Kickstand: |
|
|
|
Amount: |
|
|
#49 |
|
Petroff 4x4 2-stage Matte Box
Petroff 4x4 wide 2-stage matte box is a fully modular matte box with two filter stages, top flag, side flags, 15mm support adapter, and your choice of lens ring. The two filter stages rotate 360 degrees independently, with the ability to block stages. The snap on system allows users to easily remove or add filter stages. This matte box works with external lens diameters up to 110mm.
Our price: $1,250.00 |
|
|
| Matte Box Donut |
|
|
|
Amount: |
|
|
#516 |
|
H4n Handy Recorder
$30 MAIL-IN REBATE! VALID 4/1/2012 through 6/30/2012
Click here for mail-in rebate form.
The Zoom H4n is a sophisticated portable handheld recorder with new features and improved user experience at every level. Among its many features, Zoom’s H4n offers superior, built-in X/Y stereo condenser mics that allow variable recording patterns at either 90° or 120°. Higher quality audio capture through its new, digitally controlled, high-quality mic preamp, the ability to use internal and external mics simultaneously for 4 channel recording, a large LCD screen,more intuitive interface and onboard reference speaker will take the user’s recording experience to the next level.
The Zoom H4n portable recorder also incorporated features such as Broadcast Wave Format (BWF) compatible time stamp and track marker functions and its auto-record and pre-record features so you never miss a moment. Of course, the H4n records high resolution audio at 24bit/96kHz on SD/SDHC media of up to 32GB and is USB 2.0. The H4n is a robust recorder with a rubberized, shock resistant body for improved chassis protection, all-metal microphone design and a built-in mounting joint for tripod and mic stand use.
Our price: $325.00 |
|
|
| RedHead H4n Windscreen |
|
|
|
Amount: |
|
|
#523 |
|
Zound Hotshoe
The Zound Hotshoe is a quick release zacuto mount used to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole to the camera’s hotshoe. This kit is particularly designed to mount a sound device off the camera’s hotshoe but it can be used for other devices as well.
Our price: $183.35 |
|
|
Amount: |
|
|
#574 |
|
Cross Fire
The Cross Fire is a unique kit as it is the Single Action kit and Striker kit combined. It comes with all block rods. The Cross Fire uses the expandable DSLR baseplate so this kit can easily be upgraded from a simple point of contact kit like the Striker Kit to a full shoulder mounted system like the Fast Draw. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height.
The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) ¼ 20” and (1) 3/8 16”. Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro, DSLR optical viewfinder, by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.
See customer reviews here!
Our price: $2,256.25 |
|
|
Amount: |
|
|
#575 |
|
Fast Draw
The Fast Draw is a shoulder mounted handheld system that uses our DSLR baseplate. It comes with all black rods. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height. The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) ¼ 20” and (1) 3/8 16”. Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.
See customer reviews here!
Our price: $1,472.50 |
|
|
Amount: |
|
|
#560 |
|
DSLR Remote Trigger
The FLEX is a patent-pending, handle mounted DSLR remote unit that triggers HD video start and stop recording for Canon 5D/7D. The FLEX’s unique gooseneck arm houses an optic to be positioned within line of sight to the remote sensor on the Canon cameras (transmits up to 1m away, 135deg spread).
Once positioned, the remote transmits a signal through the optic when the button is depressed.
The arm can be extended up to 12" and coils down to approximately 3" in diameter. The FLEX's all metal construction will standup to the everyday rigors of HD DSLR video production. Max clamp diameter 1.5". Powered by 2 included AAA batteries.
Our price: $155.00 |
|
|
Amount: |
|
|
#588 |
|
Double Barrel Kickstand
The Double Barrel kickstand is recommended for the DSLR Double Barrel Kit. It gives the rig a more stable footing when rested on the ground or flat surface, especially when the camera is loaded with many accessories such as follow focuses and matte boxes. It is all black.
Our price: $65.00 |
|
|
Amount: |
|
|
#610 |
|
DSLR Double Barrel Foam Insert
Zacuto's Double Barrel foam insert is dual purpose, it can fit either or both the Zacuto Double Barrel kit and Cross Fire Kit with a camera attached as well as a lens and matte box. This foam fits into a Storm Case IM-2750 which is not included but is available for purchase below.
Our price: $255.00 |
|
|
| Hard Case |
|
|
|
Amount: |
|
|
#616 |
|
Storm Case IM-2750
Storm Cases are designed to transport and protect your valuables even under the most adverse conditions. Storm Cases are more than just watertight, padlockable and made in the USA,
they’re also Unconditionally Guaranteed for Life.
Please note that the case does not include foam!
Our price: $205.00 |
|
|
Amount: |
|
|
#617 |
|
Shoot Great Video with Your Canon DSLR Camera
Blue Crane's "Shoot Great Video with Your Canon DSLR Camera" is a 77 minute long presentation that addresses the challenges still photographers face when using their new Canon DSLR to capture and produce video.
This DVD isn’t about camera controls alone. Whether a photographer is using a 1D Mark IV, a 7D, a T2i, or any other DSLR model that captures video, a Canon shooter will come away with an understanding of the tools, accessories, and techniques that will make the finished video better.
Our price: $25.50 |
|
|
Amount: |
|
|
#642 |
|
Wireless Plate Pro
The Zacuto Wireless Plate Pro allows you to mount any size wireless, down-converter, video transmitter regardless of size, make, model or manufacturer with Velcro.
The Wireless plate can screw into the Zacuto Zwiss Plate, Zacuto Red Plate or can mount off a 15mm rod by using a Wireless bracket and a z-lock.
The Wireless Plate Pro is 3 5/8 x 3 5/8. The lip sticks out 1 3/8.
Our price: $55.00 |
|
|
Amount: |
|
|
#638 |
|
Zgrip Gloves
Our new Zgrip gloves are the perfect accessory to our Zgrip handle or handles. Non-slip textured FDA Grade High temperature silicone ‘gloves’ slide onto our zgrip handle giving additional padding for long shoots. They are easy to take on and off depending on user preference. They can be used with any of our single handle or double handle zgrips, including the Zgrips beefy. Includes 2 gloves.
Our price: $49.00 |
|
|
Amount: |
|
|
#652 |
|
3/8 16" Lens Support
The 3/8 16" Lens Support uses a 3/8 16" screw to screw directly into a variety of lenses for more support. This lens support clamps to the rods from underneath so it can quickly be taken off the rods. The middle rod that attaches to the lens has vertical adjustment, if needed (please select the rod size below). Only thumb screw tightening is necessary, no tools required. This lens support can be used with a variety of rod sizes. Please select the rods that are being used below for the q-mount.
3/8 16" Lens Support Includes:
Rod (please select the size of rod needed below)
1/2" to 3/8 16" adapter
Q-Mount Lightweight (if a different size Q-Mount is needed, please call)
Our price: $237.00 |
|
|
| Rod Size |
|
|
|
Amount: |
|
|
#740 |
|
Z-Focus Extender
The Z-Focus Extender is used to extend the distance between the focus knob and gear housing on any Zacuto Z-Focus. Moving the focus knob away from the rods is essential for compact rig setups with multiple accessories. The Z-Focus Extender is 4.5" long. The added distance provides clearance between an EVF and focus knob, making it much easier for the focus puller or camera operator to control the knob and see focus marks. This accessory can potentially shorten your overall rig length by three inches, moving the rig center of gravity closer to the user’s shoulder. Installation is easy. Check out detailed product page for instructional video.
If you are using a Z-Focus that was purchased before January of 2010 or your Z-Focus gear has a hole in the middle instead of a metal pin, please call as you will need a different screw to mount the extender properly.
Our price: $95.00 |
|
|
Amount: |
|
|
|
