|
|
|
Doublemount and Red Plate
|
See details
|
|
SKU: Z-DMRP
CLEARANCE
BIG SAVINGS!!
Was $365 now $225
LIMITED QUANTITIES
The Doublemount and Red plate combo allows you to mount your battery plate to your rod system horizontally. The DoubleMount includes 7" rods and can accept two Zround Mounts in the middle holes for mounting a Zacuto Articulating Arm. The Red Plate screws into the bottom of the Doublemount and allows you to mount a V-Mount or 3-Stud Anton Bauer battery plate. Now you can mount your professional brick style batteries to your rig horizontally for counterbalance. The Red Plate allows you to mount our Wireless Plate or Wireless Plate Pro to hold your wireless receivers. If you want to mount your pro batteries vertically, check out our Zwiss Plate.
Savings included in price below. Was $365 now $225.
Our price: $225.00
|
|
|
|
|
|
DoubleMount, V3, includes 7" rods
|
See details
|
|
SKU: Z-DM3
CLEARANCE
BIG SAVINGS!!
Was $235 now $150
LIMITED QUANTITIES
Zacuto is the first to invent a device that has rods going off the back of a camera. This invention allows us to balance front heavy camera packages while adding mounting options for articulating arms, wireless plates and 12 volt battery power.
Savings included in price below. Was $235 now $150.
Our price: $150.00
|
|
|
|
|
|
Zamerican Jr. Medium
|
See details
|
|
SKU: ZARM-M2-1BP
CLEARANCE
BIG SAVINGS!!
Was $175 now $125
LIMITED QUANTITIES
Zamerican Jr. Medium 8 inch articulating arm with one ball pivot is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Savings included in price below. Was $175 now $125.
Our price: $125.00
|
|
|
|
|
|
Zamerican Jr. Small
|
See details
|
|
SKU: ZARM-S2-1BP
CLEARANCE
BIG SAVINGS!!
Was $165 now $120
LIMITED QUANTITIES
Zamerican Jr. Small 5 inch articulating arm with one ball pivot is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Savings included in price below. Was $165 now $120.
Our price: $120.00
|
|
|
|
|
|
Grill Adapter
|
See details
|
|
SKU: Z-GRL
CLEARANCE
BIG SAVINGS!!
Was $59 now $39
LIMITED QUANTITIES
The Grill adapter attaches a Jeep to a Universal Baseplate which allows the Zacuto baseplate to have 19mm studio, 15mm studio rods (Arri) or 15mm lightweight rods off the front of the baseplate. The track built-in to the Grill adapter allows you to adjust all rods to whatever lens height you need, like a built-in Z-riser. Left to right movement is achieved with the Zacuto baseplate.
Savings included in price below. Was $59 now $39.
Our price: $39.00
|
|
|
|
|
|
Zgrip iPhone Pro
|
See details
|
|
SKU: Z-ZG-IP
CLEARANCE
BIG SAVINGS!!
Was $295 now $200
LIMITED QUANTITIES
The Zgrip iPhone Pro is our completely adjustable, quick releasable handgrip system for shooting professional stable video using the iPhone. The combination of the fully articulating ball joint at the handle and our ratcheting levers on the iPhone mount allow the user to adjust every angle and get those interesting creative smooth shots. The iPhone can be set to landscape or portrait position and everything in between. Compatible with all iPhone 3 and 4 models. The rod attached to the handle is threaded to accept a Zacuto rod extension. Add up to 10” so your iPhone soars over the crowds!
Want to mount a ¼ 20” threaded light or sound recorder? Pick up the Zacuto Zicromount. (Coldshoe version here.)
Want to add a simple tripod mount? We recommend the combination of a ¼ 20” Zud and a 2” M/F rod.
Please Note: This rig will not work if using a case with your iPhone.
See customer reviews here!
Savings included in price below. Was $295 now $200.
Our price: $200.00
|
|
|
|
|
|
DSLR Double Barrel Foam Insert
|
See details
|
|
SKU: Z-FI-DDB
CLEARANCE
BIG SAVINGS!!
Was $255 now $178
30% DISCOUNT!! LIMITED QUANTITIES
Zacuto's Double Barrel foam insert is dual purpose, it can fit either or both the Zacuto Double Barrel kit and Cross Fire Kit with a camera attached as well as a lens and matte box. This foam fits into a Storm Case IM-2750 which is not included but is available for purchase below.
List price: $255
30% discount included in price below. Was $255 now $178.
Our price: $178.00
|
|
|
|
|
|
Large Sensor Camera Foam Insert
|
See details
|
|
SKU: Z-FI-AF100
CLEARANCE
BIG SAVINGS!!
Was $205 now $143
30% DISCOUNT!! LIMITED QUANTITIES
The Large Sensor Camera Foam Insert holds the AF100, FS100 and DSLR's. This is a multi-use foam insert and a variety of items can fit inside. It holds the cameras mounted to our Universal Baseplate and various other accessories. There are compartments for our EVF, Z-Finder, a matte box, lenses, cables, manuals, rod extensions and more. It is designed to fit the IM-2700 Storm Case. The hard case is available for purchase below.
Actual weight is 2 lbs, but for shipping we use the dimensional weight, which is 16 lbs.
List price: $205
30% discount included in price below. Was $205 now $143.
Our price: $143.00
|
|
|
|
|
|
Lenses and Accessories Foam Insert
|
See details
|
|
SKU: Z-DOF-FI
CLEARANCE
BIG SAVINGS!!
Was $180 now $126
30% DISCOUNT!! LIMITED QUANTITIES
The Lenses and Accessories Foam Insert holds 6 Nikon/Zeiss Prime lenses, rod extensions, follow focus and many other small accessories for your camera package. It is perfect for a DSLR shooter or a DOF shooter. It is intended to fit the Storm Case IM-2700. The case is not included in the price. The case is available for purchase below.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
List Price: $180
30% discount included in price below. Was $180 now $126.
Our price: $126.00
|
|
|
|
|
|
Z-Stop
|
See details
|
|
SKU: Z-Stop
CLEARANCE
BIG SAVINGS!!
Was $95 now $65
LIMITED QUANTITIES
The Z-stop is a handy tool for anyone using a depth-of-field adapter (DOF). It slides onto a 15mm rod and keeps your original camera lens from moving when using a depth-of-field adapter. No more accidentally moving the camera lens out of focus!
Savings included in price below. Was $95 now $65.
Our price: $65.00
|
|
|
|
|
|
Z-Lock Cheesestick
|
See details
|
|
SKU: ZL-CS
CLEARANCE
50% SAVINGS!!
Was $100 now $50
LIMITED QUANTITIES
The Z-Lock Cheesestick slides and tightens onto any 15mm rod to provide a set of easily accessible industry standard screw holes. The two outside screw holes are threaded 3/8 16 and the two inside screw holes are ¼ 20. These would be perfect for attaching Noga arms. You can retrofit this to accept a Zamerican Arm or female 15mm rod by adding a Zicromount.
Savings included in price below. Was $100 now $50.
Our price: $50.00
|
|
|
|
|
|
10" Pair of Solid 19mm Rods
|
See details
|
|
SKU: Z-BR-19
CLEARANCE
BIG SAVINGS!!
Was $75 now $30
LIMITED QUANTITIES
Pair of 19mm solid, black rods. 10in long.
Savings included in price below. Was $75 now $30.
Our price: $30.00
|
|
|
|
|
|
DEMO Z-Finder Pro 2.5x
|
See details
|
|
SKU: Z-FIND-PRO2-DEMO
LIMITED QUANTITIES!
Full Price $395 DEMO Price $300
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Pro 2.5x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification (3x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $300.00
|
|
|
|
|
|
DEMO Z-Finder Pro 3x
|
See details
|
|
SKU: Z-FIND-PRO3-DEMO
LIMITED QUANTITIES!
Full Price $395 DEMO Price $300
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Pro 3x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $300.00
|
|
|
|
|
|
DEMO Z-Finder 3" Mounting Frame for Small DSLR Bodies
|
See details
|
|
SKU: Z-MFS-DEMO
LIMITED QUANTITIES!
Full Price $50 DEMO Price $38
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with 3" screens and no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D Canon 60D, Nikon D90, Nikon D300, D7000 and other cameras of the same size.
This frame is not compatible with the D800 or 5D Mark III. A frame for the MIII and D800 is available here!
Our price: $38.00
|
|
|
|
|
|
DEMO Z-Finder Mounting Frame for Small DSLR Bodies with Battery Grips
|
See details
|
|
SKU: Z-MFSB-DEMO
LIMITED QUANTITIES!
Full Price $120 DEMO Price $90
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.
Please Note: This frame DOES NOT WORK with 3rd party battery grips.
Our price: $90.00
|
|
|
|
|
|
DEMO Z-Finder Mounting Frame for Tall DSLR Bodies
|
See details
|
|
SKU: Z-MFT-DEMO
LIMITED QUANTITIES!
Full Price $95 DEMO Price $70
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV and Nikon D3s.
Our price: $70.00
|
|
|
|
|
|
DEMO Z-Finder Mounting Frame for Canon 5D MII
|
See details
|
|
SKU: Z-MF5D-DEMO
LIMITED QUANTITIES!
Full Price $63 DEMO Price $48
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Mounting Frame is specific for the Canon 5D Mark II camera only. The Z-Finder Mounting frame that is included with the Z-Finder Pro is a Universal Frame and it will with the Canon 5D, Canon 7D, Canon T2i and more. However, if you want a frame where the red thumb screws on the gorilla plate will cover the entire frame than this is your frame.
Please note, that this will NOT work with the 5D MII with battery grip, MIII, 7D, Canon T2i or any other camera. It will work solely on the Canon 5d Mark II. If you are using the cameras with a battery grip, then the battery grip frame is needed.
Our price: $48.00
|
|
|
|
|
|
DEMO Universal Baseplate, V3, includes 12-inch rods
|
See details
|
|
SKU: Z-UB3-DEMO
LIMITED QUANTITIES!
Full Price $560 DEMO Price $440
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Universal Baseplate works with all cameras, including Panasonic HVX200, DVX100a/b,AF-100 Canon XL-H1, XL1, XL1s, XL2, GL2, XH-A1 Sony XDCAM EX1 EX3, Sony F3, Sony NEX-FS100*, SO-HVR-Z1U, VX1000, VX2000, PD-150, PD-170, JVC GY-HD100U,HD200U, HD250U, Silicon Imaging SI2K, RED ONE and any other cameras of this size.
Zacuto Universal Baseplate includes 12-inch rods and works and allows mounting accessories off the front and the back of the rods.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
See customer reviews here!
*If using an FS100 with a matte box, a Z-Spacer or Quick-Release Plate is needed to raise the camera to the propert height needed.
Our price: $440.00
|
|
|
|
|
|
DEMO Top plate of DSLR Baseplate
|
See details
|
|
SKU: Z-DSLR-B-PRP-DEMO
LIMITED QUANTITIES!
Full Price $95 DEMO Price $75
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Top Part of the DSLR Baseplate is a great add on for those with more than one DSLR. You can leave this plate on your camera or large lens with a screw hole (like a 70-200) and quickly move from camera to camera or lens by quick releasing the plate from the rest of the DSLR Baseplate using the red knob. This plate is not the same as the Gorilla Plate. This plate does not have a 15mm hole on the bottom. For the Gorilla Plate, click here. For the whole DSLR Basepate, click here.
Our price: $75.00
|
|
|
|
|
|
DEMO Gorilla Baseplate for C300, Scarlet and Epic Cameras
|
See details
|
|
SKU: Z-CGB-DEMO
LIMITED QUANTITIES!
Full Price $165 DEMO Price $124
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Gorilla Baseplate for the EOS C300, Scarlet and Epic cameras is a simpler, lighter version of our C300 Studio Baseplate. It attaches to the camera with 3/8” 16 and ¼” 20 screws*. The Gorilla Baseplate features 15mm diameter, 60mm spaced threaded rod holes in the front of the base plate that allow users to mount a follow focus, lens support or other accessories in front of the camera. The Gorilla Baseplate is not compatible for matte box use unless you have a height adjustable matte box**.
The Gorilla Baseplate also features our rod port system on the side of the plate which allows you to mount an EVF or other accessories off of the side. The Gorilla Baseplate is great for building simple run’n’gun type set ups like the C300 Target Shooter, C300 Striker and Recoil. It can also be used for a simple tripod set-up. The Gorilla Baseplate does not come with rods, rods must be purchased separately.
Our price: $124.00
|
|
|
|
|
|
DEMO Z-Spacer
|
See details
|
|
SKU: Z-SPCR-DEMO
LIMITED QUANTITIES!
Full Price $135 DEMO Price $105
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Spacer is used with our Universal Baseplate when mounting a DSLR or the FS100 camera and using a matte box. The Z-Spacer allows you to mount any matte box and the Z-Focus by rising the camera and moving it forward so the lens mount is over the rods. For the FS100, the Z-Spacer raises the camera to the proper height for the lens to reach a matte box.
Our price: $105.00
|
|
|
|
|
|
DEMO Zgrip iPhone Jr.
|
See details
|
|
SKU: Z-ZG-IPJ-DEMO
LIMITED QUANTITIES!
Full Price $69 DEMO Price $52
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
Zacuto has two items to help with stability when shooting with the iPhone 3G, 3Gs and now the iPhone 4. We have the Zgrip Iphone Pro and Jr. With the Zgrip iPhone Jr., you have many of the same features of its big brother, Zgrip iPhone Pro minus the adjustability. The Zgrip iPhone Pro has more adjustability but both give you the key feature which is stability when shooting with the iPhone 3Gs and now the iPhone 4.
Zgrip iPhone Jr. is a handgrip system for shooting professional stable video using the iPhone. The iPhone snaps into the iPhone cradle which is attached to the handgrip. The handgrip has a ¼ 20” thread on the bottom so you can mount it to a tripod. It also has a ¼ 20” thread on the top for mounting accessories such as a light.
The Zgrip iPhone Jr. is developed by Zacuto the leading indie camera accessories maker in the professional market. All Zacuto products are designed and made in the USA and have a lifetime warranty.
Please Note: This rig will not work if using a case with your iPhone.
See customer reviews here!
Our price: $52.00
|
|
|
|
|
|
|
|
|
|
| Result pages: |
1 |
2 |
 |
|
|
