|
|
|
10" Pair of Solid 19mm Rods
|
See details
|
|
SKU: Z-BR-19
CLEARANCE
BIG SAVINGS!!
Was $75 now $30
LIMITED QUANTITIES
Pair of 19mm solid, black rods. 10in long.
Savings included in price below. Was $75 now $30.
Our price: $30.00
|
|
|
|
|
|
DEMO Gorilla Baseplate for C300, Scarlet and Epic Cameras
|
See details
|
|
SKU: Z-CGB-DEMO
LIMITED QUANTITIES!
Full Price $165 DEMO Price $124
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Gorilla Baseplate for the EOS C300, Scarlet and Epic cameras is a simpler, lighter version of our C300 Studio Baseplate. It attaches to the camera with 3/8” 16 and ¼” 20 screws*. The Gorilla Baseplate features 15mm diameter, 60mm spaced threaded rod holes in the front of the base plate that allow users to mount a follow focus, lens support or other accessories in front of the camera. The Gorilla Baseplate is not compatible for matte box use unless you have a height adjustable matte box**.
The Gorilla Baseplate also features our rod port system on the side of the plate which allows you to mount an EVF or other accessories off of the side. The Gorilla Baseplate is great for building simple run’n’gun type set ups like the C300 Target Shooter, C300 Striker and Recoil. It can also be used for a simple tripod set-up. The Gorilla Baseplate does not come with rods, rods must be purchased separately.
Our price: $124.00
|
|
|
|
|
|
DEMO Q-Mount Lightweight
|
See details
|
|
SKU: Z-QML-DEMO
LIMITED QUANTITIES!
Full Price $198 DEMO Price $150
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
Zacuto's univeral Z-Release mount for 15mm lightweight rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount lightweight has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $150.00
|
|
|
|
|
|
DEMO Studio 15mm Centered Q-Mount
|
See details
|
|
SKU: Z-QMAC-DEMO
LIMITED QUANTITIES!
Full Price $250 DEMO Price $190
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
Zacuto's univeral Z-Release mount for 15mm studio centered rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 15mm centered has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods.
Our price: $190.00
|
|
|
|
|
|
DEMO Studio 19mm Q-Mount
|
See details
|
|
SKU: Z-QMS-DEMO
LIMITED QUANTITIES!
Full Price $250 DEMO Price $190
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
Zacuto's univeral Z-Release mount for 19mm studio rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 19mm studio has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $190.00
|
|
|
|
|
|
DEMO Top plate of DSLR Baseplate
|
See details
|
|
SKU: Z-DSLR-B-PRP-DEMO
LIMITED QUANTITIES!
Full Price $95 DEMO Price $75
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Top Part of the DSLR Baseplate is a great add on for those with more than one DSLR. You can leave this plate on your camera or large lens with a screw hole (like a 70-200) and quickly move from camera to camera or lens by quick releasing the plate from the rest of the DSLR Baseplate using the red knob. This plate is not the same as the Gorilla Plate. This plate does not have a 15mm hole on the bottom. For the Gorilla Plate, click here. For the whole DSLR Basepate, click here.
Our price: $75.00
|
|
|
|
|
|
DEMO Universal Baseplate, V3, includes 12-inch rods
|
See details
|
|
SKU: Z-UB3-DEMO
LIMITED QUANTITIES!
Full Price $560 DEMO Price $440
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Universal Baseplate works with all cameras, including Panasonic HVX200, DVX100a/b,AF-100 Canon XL-H1, XL1, XL1s, XL2, GL2, XH-A1 Sony XDCAM EX1 EX3, Sony F3, Sony NEX-FS100*, SO-HVR-Z1U, VX1000, VX2000, PD-150, PD-170, JVC GY-HD100U,HD200U, HD250U, Silicon Imaging SI2K, RED ONE and any other cameras of this size.
Zacuto Universal Baseplate includes 12-inch rods and works and allows mounting accessories off the front and the back of the rods.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
See customer reviews here!
*If using an FS100 with a matte box, a Z-Spacer or Quick-Release Plate is needed to raise the camera to the propert height needed.
Our price: $440.00
|
|
|
|
|
|
DEMO Z-Finder 3" Mounting Frame for Small DSLR Bodies
|
See details
|
|
SKU: Z-MFS-DEMO
LIMITED QUANTITIES!
Full Price $50 DEMO Price $38
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with 3" screens and no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D Canon 60D, Nikon D90, Nikon D300, D7000 and other cameras of the same size.
This frame is not compatible with the D800 or 5D Mark III. A frame for the MIII and D800 is available here!
Our price: $38.00
|
|
|
|
|
|
DEMO Z-Finder Mounting Frame for Canon 5D MII
|
See details
|
|
SKU: Z-MF5D-DEMO
LIMITED QUANTITIES!
Full Price $63 DEMO Price $48
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Mounting Frame is specific for the Canon 5D Mark II camera only. The Z-Finder Mounting frame that is included with the Z-Finder Pro is a Universal Frame and it will with the Canon 5D, Canon 7D, Canon T2i and more. However, if you want a frame where the red thumb screws on the gorilla plate will cover the entire frame than this is your frame.
Please note, that this will NOT work with the 5D MII with battery grip, MIII, 7D, Canon T2i or any other camera. It will work solely on the Canon 5d Mark II. If you are using the cameras with a battery grip, then the battery grip frame is needed.
Our price: $48.00
|
|
|
|
|
|
DEMO Z-Finder Mounting Frame for Small DSLR Bodies with Battery Grips
|
See details
|
|
SKU: Z-MFSB-DEMO
LIMITED QUANTITIES!
Full Price $120 DEMO Price $90
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.
Please Note: This frame DOES NOT WORK with 3rd party battery grips.
Our price: $90.00
|
|
|
|
|
|
DEMO Z-Finder Mounting Frame for Tall DSLR Bodies
|
See details
|
|
SKU: Z-MFT-DEMO
LIMITED QUANTITIES!
Full Price $95 DEMO Price $70
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV and Nikon D3s.
Our price: $70.00
|
|
|
|
|
|
DEMO Z-Finder Pro 2.5x
|
See details
|
|
SKU: Z-FIND-PRO2-DEMO
LIMITED QUANTITIES!
Full Price $395 DEMO Price $300
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Pro 2.5x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification (3x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $300.00
|
|
|
|
|
|
DEMO Z-Finder Pro 3x
|
See details
|
|
SKU: Z-FIND-PRO3-DEMO
LIMITED QUANTITIES!
Full Price $395 DEMO Price $300
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Pro 3x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $300.00
|
|
|
|
|
|
DEMO Z-Mount II
|
See details
|
|
SKU: Z-MO-2-DEMO
LIMITED QUANTITIES!
Full Price $100 DEMO Price $75
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Mount II allows you to mount a monitor or any device on a 15mm lightweight support rod. The Z-mount II is ideal for mounting a monitor to Zacuto Zgrips. This is a must for every DP or AC since it serves as a basic rigging device. The Z-mount II goes one step further by allowing a lens support to be mounted directly in the center of standard 15mm rail systems.
Our price: $75.00
|
|
|
|
|
|
DEMO Z-Spacer
|
See details
|
|
SKU: Z-SPCR-DEMO
LIMITED QUANTITIES!
Full Price $135 DEMO Price $105
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Spacer is used with our Universal Baseplate when mounting a DSLR or the FS100 camera and using a matte box. The Z-Spacer allows you to mount any matte box and the Z-Focus by rising the camera and moving it forward so the lens mount is over the rods. For the FS100, the Z-Spacer raises the camera to the proper height for the lens to reach a matte box.
Our price: $105.00
|
|
|
|
|
|
DEMO Zamerican, V3 Medium
|
See details
|
|
SKU: ZARM-M3-DEMO
LIMITED QUANTITIES!
Full Price $205 DEMO Price $155
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
Zamerican V3 Medium 9 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Our price: $155.00
|
|
|
|
|
|
DEMO Zamerican, V3 Small
|
See details
|
|
SKU: ZARM-S3-DEMO
LIMITED QUANTITIES!
Full Price $195 DEMO Price $145
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
Zamerican V3 Small 6 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Our price: $145.00
|
|
|
|
|
|
DEMO Zandy
|
See details
|
|
SKU: Z-ZNDY-DEMO
LIMITED QUANTITIES!
Full Price $144 DEMO Price $110
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Zandy allows you to mount a monitor, viewfinder, and many other devices using a Zamerican Arm off a 19mm studio rod. Ideal for mounting a monitor or the RED ONE EVF on a 19mm studio rod. If using an articulating arm, a ZUD is required. If you are looking to mount a device off a 15mm rod, check out the Z-Mount II.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $110.00
|
|
|
|
|
|
DEMO Zgrip iPhone Jr.
|
See details
|
|
SKU: Z-ZG-IPJ-DEMO
LIMITED QUANTITIES!
Full Price $69 DEMO Price $52
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
Zacuto has two items to help with stability when shooting with the iPhone 3G, 3Gs and now the iPhone 4. We have the Zgrip Iphone Pro and Jr. With the Zgrip iPhone Jr., you have many of the same features of its big brother, Zgrip iPhone Pro minus the adjustability. The Zgrip iPhone Pro has more adjustability but both give you the key feature which is stability when shooting with the iPhone 3Gs and now the iPhone 4.
Zgrip iPhone Jr. is a handgrip system for shooting professional stable video using the iPhone. The iPhone snaps into the iPhone cradle which is attached to the handgrip. The handgrip has a ¼ 20” thread on the bottom so you can mount it to a tripod. It also has a ¼ 20” thread on the top for mounting accessories such as a light.
The Zgrip iPhone Jr. is developed by Zacuto the leading indie camera accessories maker in the professional market. All Zacuto products are designed and made in the USA and have a lifetime warranty.
Please Note: This rig will not work if using a case with your iPhone.
See customer reviews here!
Our price: $52.00
|
|
|
|
|
|
DEMO Zonitor Handheld Kit for 15mm rods
|
See details
|
|
SKU: Z-ZHH-DEMO
LIMITED QUANTITIES!
Full Price $407 DEMO Price $305
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Zonitor Handheld mount kit allows you to quick-release a monitor from a Zamerican articulating arm and the arm from the Zacuto 15mm Z-Mount. This kit allows you to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole, such as an external on-board monitor, lights, and/or hard drives, using a Zamerican Arm. The arm is mounted on one rod using a Zacuto 15mm Z-Mount.
Our price: $305.00
|
|
|
|
|
|
DEMO Zonitor Lightweight Kit
|
See details
|
|
SKU: Z-ZLTW-DEMO
LIMITED QUANTITIES!
Full Price $505 DEMO Price $379
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Zonitor Lightweight mount kit allows you to quick-release a monitor from a Zamerican articulating arm and the arm from the Zacuto Q-mount. This kit allows you to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole, such as an external on-board monitor, lights, and/or hard drives, using a Zamerican Arm. The arm is mounted on a set of 15mm lightweight rods using the q-mount.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $379.00
|
|
|
|
|
|
Doublemount and Red Plate
|
See details
|
|
SKU: Z-DMRP
CLEARANCE
BIG SAVINGS!!
Was $365 now $225
LIMITED QUANTITIES
The Doublemount and Red plate combo allows you to mount your battery plate to your rod system horizontally. The DoubleMount includes 7" rods and can accept two Zround Mounts in the middle holes for mounting a Zacuto Articulating Arm. The Red Plate screws into the bottom of the Doublemount and allows you to mount a V-Mount or 3-Stud Anton Bauer battery plate. Now you can mount your professional brick style batteries to your rig horizontally for counterbalance. The Red Plate allows you to mount our Wireless Plate or Wireless Plate Pro to hold your wireless receivers. If you want to mount your pro batteries vertically, check out our Zwiss Plate.
Savings included in price below. Was $365 now $225.
Our price: $225.00
|
|
|
|
|
|
DoubleMount, V3, includes 7" rods
|
See details
|
|
SKU: Z-DM3
CLEARANCE
BIG SAVINGS!!
Was $235 now $150
LIMITED QUANTITIES
Zacuto is the first to invent a device that has rods going off the back of a camera. This invention allows us to balance front heavy camera packages while adding mounting options for articulating arms, wireless plates and 12 volt battery power.
Savings included in price below. Was $235 now $150.
Our price: $150.00
|
|
|
|
|
|
DSLR Double Barrel Foam Insert
|
See details
|
|
SKU: Z-FI-DDB
CLEARANCE
BIG SAVINGS!!
Was $255 now $178
30% DISCOUNT!! LIMITED QUANTITIES
Zacuto's Double Barrel foam insert is dual purpose, it can fit either or both the Zacuto Double Barrel kit and Cross Fire Kit with a camera attached as well as a lens and matte box. This foam fits into a Storm Case IM-2750 which is not included but is available for purchase below.
List price: $255
30% discount included in price below. Was $255 now $178.
Our price: $178.00
|
|
|
|
|
|
|
|
|
|
| Result pages: |
1 |
2 |
 |
|
|
