|
|
|
Universal Baseplate, V3, includes 12-inch rods
|
See details
|
|
SKU: Z-UB3
The Universal Baseplate works with all cameras, including Panasonic HVX200, DVX100a/b,AF-100 Canon XL-H1, XL1, XL1s, XL2, GL2, XH-A1 Sony XDCAM EX1 EX3, Sony F3, Sony NEX-FS100*, SO-HVR-Z1U, VX1000, VX2000, PD-150, PD-170, JVC GY-HD100U,HD200U, HD250U, Silicon Imaging SI2K, RED ONE and any other cameras of this size.
Zacuto Universal Baseplate includes 12-inch rods and works and allows mounting accessories off the front and the back of the rods.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
See customer reviews here!
*If using an FS100 with a matte box, a Z-Spacer or Quick-Release Plate is needed to raise the camera to the propert height needed.
Our price: $560.00
|
|
|
|
|
|
DSLR Baseplate
|
See details
|
|
SKU: Z-DSLR-B
Your Zacuto DSLR Base Plate is a highly configurable base plate which is adjustable to accommodate tall and short body cameras and cameras with battery grips. It also has mounting points to attach just about anything. It comes with 2 black 3.5" rods.
The DSLR Base Plate can accommodate 15mm rods on all 4 sides. On the front are 2 levels for rods. The top is for mounting follow focuses, matte boxes, zoom/focus motors and lens support if space allows. The bottom rods are primarily used for lens support and single or double hand grips. These rods can be locked via allen screw so as to not come loose if using only one side for a single hand grip. The rear rod holes are for rod extensions to support battery power, wireless plates, monitors and numerous other accessories that you may need when in a tripod configuration. The rod holes on the left and right sides are for mounting the gunstock and the offset shoulder pad and counterweight for hand held use. Also mounted on these side rods can be a top handle, monitor arms and the cage which would use both sides at the same time.
On the bottom of the DSLR Base plate are your standard ¼ 20 and 3/8 16 mounting holes for tripods, mono pods, steadicams, etc. The top plate is a quick release plate that with a twist of the red knob lifts straight up and off separating your DSLR with the Z-finder attached, from the rest of your rig. The red knob also gives you left/right movement to adjust the lens position.
On the front of the base plate between the rods are 2 allen screws that are used to adjust the top plate vertically. The vertical adjustment is to adjust for different camera body sizes and maintain the proper lens height.
See customer reviews here!
Our price: $420.00
|
|
|
|
|
|
Top plate of DSLR Baseplate
|
See details
|
|
SKU: Z-DSLR-B-PRP
The Top Part of the DSLR Baseplate is a great add on for those with more than one DSLR. You can leave this plate on your camera or large lens with a screw hole (like a 70-200) and quickly move from camera to camera or lens by quick releasing the plate from the rest of the DSLR Baseplate using the red knob. This plate is not the same as the Gorilla Plate. This plate does not have a 15mm hole on the bottom. For the Gorilla Plate, click here. For the whole DSLR Basepate, click here.
Our price: $95.00
|
|
|
|
|
|
Mini Baseplate with 12in Rods
|
See details
|
|
SKU: Z-M-UB
The Zacuto Mini Baseplate (Z-M-UB) is a smaller version of the Zacuto Universal Baseplate (Z-UB3). The Mini Baseplate has many of the same features as the Universal Baseplate but was designed for use with smaller cameras like the RED Epic and Scarlet, as well as DSLRs like the Nikon D90, Canon 5d Mark II. The Mini Baseplate can also be used with Midsized flat bottom cameras like the Panasonic HPX170, HVX200, Sony EX1, and other cameras of this size as well as Small HD cameras like the Canon HV20, HV30, and so forth.
The Mini Baseplate now has a ¼” 20 screw, a 3/8” 16 screw, and a locking pin on the base to allow you to mount your camera. If you need (2) 3/8” 16 screws, you can purchase our 3/8 16 to 1/4 20 Screw Adapter and convert the ¼” 20 screw that is included to a 3/8” 16 screw (Needed for the RED Epic and Scarlet). The mini baseplate attaches to the tripod plate with both 3/8 16" and 1/4 20" screws. The Mini Baseplate has up and down as well as side to side adjustments, allowing it to align all cameras with various matte boxes and follow focus units. The Mini Baseplate is supplied with 12” female/female threaded rods.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
If using an FS100 with a matte box, a Z-Spacer or Quick-Release Plate is needed to raise the camera to the propert height needed.
Our price: $430.00
|
|
|
|
|
|
Z-Spacer
|
See details
|
|
SKU: Z-SPCR
The Z-Spacer is used with our Universal Baseplate when mounting a DSLR or the FS100 camera and using a matte box. The Z-Spacer allows you to mount any matte box and the Z-Focus by rising the camera and moving it forward so the lens mount is over the rods. For the FS100, the Z-Spacer raises the camera to the proper height for the lens to reach a matte box.
Our price: $135.00
|
|
|
|
|
|
Z-Balance
|
See details
|
|
SKU: Z-BLNC
The Z-balance was designed for long length, front heavy, camera packages. The Z-balance attaches to the 15mm lightweight rods from your camera’s baseplate. The Z-balance will attach to the tripod plate using a 3/8 16” and ¼ 20” screw. The Z-balance should be placed in front of your camera baseplate when the center of gravity is under the lens from adding weight to the front of the camera with accessories like a depth of field adaptor, follow focus, matte box, etc. The adjustability of the Z-balance makes it possible to balance a front heavy camera on your tripod properly.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $120.00
|
|
|
|
|
|
Universal lightweight support system with Z-Release
|
See details
|
|
SKU: Z-LWS
The Zacuto Lightweight Support System (LWS) comes with Z-Release for all professional 2/3”, 1/2" sized cameras as well as prosumer cameras such as the JVC GY-HD100/200/250 and/or the Canon XL-H1. The LWS gives you the ability to mount rods to the front of your camera so that you can attach matte boxes and follow focus units. This system was designed to be used with a wedge style tripod plate. Zacuto has taken this several steps further. This is the first universal lightweight support plate to work with all Sony, Panasonic, Canon and JVC cameras that use the wedge style tripod plate, meaning that one plate can be used for all cameras. When you get a new camera, you can still use the Z-LWS.
Please refer to our Z-release System for an overview of our products.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $850.00
|
|
|
|
|
|
Zephyr
|
See details
|
|
SKU: Z-ZEPH
The Zephyr, Zacuto's 15mm lightweight support plate, works on all Sony and Panasonic ENG style cameras that use the V-Wedge tripod plates, except for the Panasonic 300 Series. For any Panasonic 300 Series camera, you will need the Zephyr300. The Zephyr It allows you to adjust the 15mm rods up, down, left & right to align your matte box to the lens.
The Zephyr includes two 8” rods. For extra long lenses, rod extensions may be necessary.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $625.00
|
|
|
|
|
|
Zephyr300
|
See details
|
|
SKU: Z-ZEPH300
The Zephyr300 is Zacuto's 15mm lightweight support plate custom made for the Panasonic HPX300 and other 300 series cameras. It works in conjunction with a Quick-Release Tripod Plate (not included with the camera) and the actual stainless steel V-Wedge triangle from the HPX300 camera. Zephyr300 allows you to adjust the 15mm rods up, down, left & right to align your matte box to the lens on the camera. You can also mount a follow focus or lens support if desired. It has a unique long design, with an opening in the bottom which gives room for adjusting buttons in the lower front of the camera. This design is extremely lightweight yet very strong. Like all Zacuto products, it is made from the highest quality materials, built to the most extreme tolerances and backed with a lifetime warranty.
This is the only plate on the market for the NEW Panasonic HPX300, since Panasonic changed the way LWS plates mount to the bottom of their cameras. After attempting to make a spacer for the new Panasonic, we decided that it would simply be easier to make a custom Zephyr plate.
The Zephyr includes two 6.5" rods. For extra long lenses, rod extensions may be necessary.
Our price: $565.00
|
|
|
|
|
|
Zephyr700
|
See details
|
|
SKU: Z-ZEPH700
The Zephyr700 is Zacuto's 15mm lightweight support plate custom made for the JVC GY-HM700UXT & JVC GY-HM700U. It works in conjunction with the Tripod Adapter Plate (not included with the camera) and the actual stainless steel V-Wedge triangle from the JVC camera. Zephyr700 allows you to adjust the 15mm rods up, down, left & right to align your matte box to the lens on the camera. You can also mount a follow focus or lens support if desired. It has a unique long design, with an opening in the bottom which gives room for adjusting buttons in the lower front of the camera. This design is extremely lightweight yet very strong. Like all Zacuto products, it is made from the highest quality materials, built to the most extreme tolerances and backed with a lifetime warranty.
This is the only plate on the market for the NEW JVC 700 series camera, since JVC changed the way LWS plates mount to the bottom of their cameras.
The Zephyr700 includes two 6.5" rods. For extra long lenses, rod extensions may be necessary.
Product is the Zephyr700 plate only. Everything else in picture not included.
Our price: $565.00
|
|
|
|
|
|
Zeddie Wedgie
|
See details
|
|
SKU: Z-ZW
The Zeddie Wedgie, named by Philip Bloom, is for exclusive use with the Zacuto Universal Baseplate.It does not work on the Zacuto Mini Baseplate. It allows you to use the Zacuto Universal Baseplate and mount it to a VCT-U14 tripod wedge plate - an industry standard plate found on all full size Sony and Panasonic ENG camcorders.
Now you can quick-release the Zacuto Universal Baseplate with the flip of a lever just like you would a traditional ENG style camera. The Zeddie Wedgie comes with a Zacuto T-slide, the triangle V-Wedge mount, and 2 screws. All pieces are stainless steel and carry the Zacuto lifetime warranty.
Our price: $85.00
|
|
|
|
|
|
Gorilla Plate
|
See details
|
|
SKU: Z-GRB
The Gorilla Plate is used in both of our Gorilla Kits (Striker and Target Shooter) and must be used with the Z-Finder Pro.
The Z-Finder V2 will also work with this plate! You must also purchase a frame to mount your V2 onto the Gorilla Plate. The Gorilla plate attaches to your camera using the standard tripod screw hole. You can also mount your tripod plate underneath the Gorilla plate so you can quickly go from handheld to tripod use. For mounting the Gorilla plate to the tripod, it has (2) ¼ 20” screw holes and a locking pin hole. The Z-Finder frame attaches to the Gorilla plate using two thumb screws.
The thumb screws and slider are not included with the Gorilla Plate; they are included with the Z-Finder Frames. The frame can be removed by loosening the thumb screws and pulling up on the frame.
Our price: $69.00
|
|
|
|
|
|
Gorilla Plate Adapter
|
See details
|
|
SKU: Z-GRP-ADPT
The Gorilla Plate Adapter centers the tripod holes on the bottom of the gorilla plate. The Gorilla Plate Adapter is used in conjunction with the Zacuto Gorilla Plate. The Gorilla Plate adapter is needed to center the lens and camera between the rods if you are using a Z-Finder Pro with another manufacturer's rod support system supporting follow focuses and matte boxes.
Note: A height adjustable matte box is needed if using a matte box with the Gorilla plate on another manufactures plate system unless their plate system is height adjustable like the Zacuto DSLR Baseplate.
The Gorilla Plate Adapter comes with a longer 1/4 20" screw that will replace the smaller 1/4 20" screw that comes with the Gorilla Plate. You will need to take your screw out and use the longer one provided with the adapter to attach your camera to the plate.
Our price: $17.50
|
|
|
|
|
|
Jumper
|
See details
|
|
SKU: Z-JMP
The Jumper is an accessory for customers who already own Zacuto’s DSLR Baseplate, or a kit that contains the DSLR baseplate, and would like to have Gorilla Kit run n gun capabilities. The Jumper attaches to the wedge on the top quick-releasable portion of the DSLR Baseplate. You can then mount a vertical rod via the Jumper’s 15mm hole to create a kit like the Target Shooter or Striker.
Our price: $65.00
|
|
|
|
|
|
Point n Shoot Pro
|
See details
|
|
SKU: Z-PSP
Small, lightweight, quick and portable! Zacuto's Point and Shoot is the ideal handgrip stabilization system for shooting stable, smooth professional video with any small point and shoot cameras, HD Flip and similar cameras that have a 1/4 20" thread on the bottom. Simply release the screw mount from the grip, screw onto camera, and snap back onto the handgrip for quick stable shooting in a matter of seconds. The screw mount is so small it can stay on your camera. The handgrip is also equipped with a ¼ 20” thread on the bottom so you can easily mount the system to a tripod.
See customer reviews here!
Our price: $89.00
|
|
|
|
|
|
Top Handle
|
See details
|
|
SKU: Z-TH
The Zacuto Top Handle is a multi-purpose handle that mounts to our Zwiss Cage, Zwiss Plate, Zwiss Cage Plate, the RED Epic and the Sony FS100*. This is the perfect accessory for low mode shooting and easy carrying of your camera/rig. The handle mounts using (2) ¼” 20 screws, making it easily customizable to your shooting needs. The handle and rods are a total of 7" long. Both ends of rods coming out of the handle are threaded and can be extended if necessary. All mounting hardware and screws are included.
The distance between the two 1/4" 20s is approximately 1 3/8” from center to center at their closest and 1 5/8” from center to center at their widest. The screw holes are slotted, allowing the handle to work on a variety of different things.
FS100 Users – if you are using the FS100 included microphone and mount, you can add our Z-Mount II to connect it to our Top Handle.
*The handle will block the full opening of the lcd screen on the FS100, if mounted with the handle over the camera instead of over the lens (see detailed pictures). In a couple of weeks, we will be releasing a small piece that will accommodate this.
Our price: $150.00
|
|
|
|
|
|
|
|
|
|
|
|
