|
|
|
ZUD 1/4 20
|
See details
|
|
SKU: ZUD1/4 20
A ZUD 1/4" 20 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00
|
|
|
|
|
|
ZUD 3/8 16
|
See details
|
|
SKU: ZUD 3/8 16
A ZUD 3/8" 16 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00
|
|
|
|
|
|
ZUD 3/8 16 M
|
See details
|
|
SKU: ZUD 3/8 16 M
A ZUD 3/8" 16 male (retrofit any 3/8 16 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $49.00
|
|
|
|
|
|
ZUD1/4 20 M
|
See details
|
|
SKU: ZUD1/4 20 M
A ZUD 1/4" 20 male (retrofit any 1/4 20 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $49.00
|
|
|
|
|
|
Zound Hotshoe
|
See details
|
|
SKU: Z-ZND-H
The Zound Hotshoe is a quick release zacuto mount used to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole to the camera’s hotshoe. This kit is particularly designed to mount a sound device off the camera’s hotshoe but it can be used for other devices as well.
Our price: $183.35
|
|
|
|
|
|
Zano
|
See details
|
|
SKU: Z-ZNO
The Zano is a combination of the Manfrotto Nano Clamp and the Zacuto Zicromount. The Zano allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zano onto such as tripod legs. The Zano clamp range is .51" to 1.38".
Our price: $95.00
|
|
|
|
|
|
Zaffer
|
See details
|
|
SKU: Z-ZFFR
Many people have been asking for it and now it's here. The Zaffer is a combination of the Avenger Super Clamp and the Zacuto Zicromount. The Zaffer allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zaffer on to, such as tripod legs. The Zaffer clamp range is .51" to 2.1".
Our price: $99.00
|
|
|
|
|
|
Nano Clamp
|
See details
|
|
SKU: 386B
**Not available until the first week of November**
The Nano Clamp is one of Manfrotto's most popular best sellers. Its reduced size is the most important innovation from previous designs. The Nano Clamp is 4 kg of payload in 110 grams of weight and fits right in your pocket.
Our price: $35.00
|
|
|
|
|
|
MiniMount
|
See details
|
|
SKU: Z-MM1
The MiniMount is a universal mount that slides onto 15mm lightweight rods. The MiniMount can hold an articulating arm, or any device with a 3/8 16" screw. The MiniMount can also be retrofitted to z-release mount by adding a Zround Mount.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $175.00
|
|
|
|
|
|
Q-Mount Lightweight
|
See details
|
|
SKU: Z-QML
Zacuto's univeral Z-Release mount for 15mm lightweight rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount lightweight has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $198.00
|
|
|
|
|
|
Studio 15mm Centered Q-Mount
|
See details
|
|
SKU: Z-QMAC
Zacuto's univeral Z-Release mount for 15mm studio centered rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 15mm centered has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods.
Our price: $250.00
|
|
|
|
|
|
Studio 15mm Minimount
|
See details
|
|
SKU: Z-MMA
The 15mm Studio MiniMount is a universal mount that slides onto 15mm Studio (offset) rods. The 15mm Studio MiniMount can hold an articulating arm, or any device with a 3/8 16" screw. The 15mm Studio MiniMount can also be retrofitted to be a z-release mount by adding a Zround Mount.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $190.00
|
|
|
|
|
|
Studio 15mm Q-Mount
|
See details
|
|
SKU: Z-QMA
Zacuto's univeral Z-Release mount for 15mm studio offset rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 15mm studio has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00
|
|
|
|
|
|
Studio 19mm MiniMount
|
See details
|
|
SKU: Z-MMS
The 19mm Studio MiniMount is a universal mount that slides onto 19mm Studio (offset) rods. The 19mm Studio MiniMount can hold an articulating arm, or any device with a 3/8 16" screw. The 19mm Studio MiniMount can also be retrofitted to z-release mount by adding a Zround Mount.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $190.00
|
|
|
|
|
|
Studio 19mm Q-Mount
|
See details
|
|
SKU: Z-QMS
Zacuto's univeral Z-Release mount for 19mm studio rod systems can be installed anywhere on your rod system without removing any equipment; it attaches by mounting underneath the rods and tightening the outer levers. The Q-mount 19mm studio has many uses including: mounting Zamerican arms for monitors, lights, harddrives, etc, other arms with Zacuto Zuds (available in 3/8 16" and 1/4 20" both male and female) or 15mm rods. The q-mount can also be used to create a lens support, check out Zacuto's Locking Lens Support.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00
|
|
|
|
|
|
Z-Force
|
See details
|
|
SKU: Z-FRC
The Z-Force Microforce Mount is a specialty item that allows you to mount the Preston Microforce grip on a 15mm or 19mm rod. The Z-Force has full articulation between the rosette and the z-lock mount. The Z-Force Microforce Mount also acts as a handgrip giving you more stability. Release the Z-Force with a 1/4 turn of the lever. This product does not include the Preston Microforce.
The Z-force will only work with Preston’s mount, not any aftermarket mount.
Our price: $280.00
|
|
|
|
|
|
|
|
|
|
| Result pages: |
 |
1 |
2 |
|
|
