|
|
|
Zamerican, V3 Large
|
See details
|
|
SKU: Zarm-L3
Zamerican, V3 Large 12 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $215.00
|
|
|
|
|
|
DEMO Zamerican, V3 Medium
|
See details
|
|
SKU: ZARM-M3-DEMO
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
Zamerican V3 Medium 9 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Our price: $155.00
|
|
|
|
|
|
Zamerican, V3 Medium
|
See details
|
|
SKU: ZARM-M3
Zamerican V3 Medium 9 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $205.00
|
|
|
|
|
|
Zamerican, V3 Small
|
See details
|
|
SKU: ZARM-S3
Zamerican V3 Small 6 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $195.00
|
|
|
|
|
|
Zamerican Jr. Medium
|
See details
|
|
SKU: ZARM-M2-1BP
Zamerican Jr. Medium 8 inch articulating arm with one ball pivot is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $175.00
|
|
|
|
|
|
Zamerican Jr. Small
|
See details
|
|
SKU: ZARM-S2-1BP
Zamerican Jr. Small 5 inch articulating arm with one ball pivot is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $165.00
|
|
|
|
|
|
ZicroMount
|
See details
|
|
SKU: Z-ZC
The ZicroMount is used for mounting monitors, hard drives or any device that accepts a ¼ 20" screw or a 3/8 16” screw (with a ¼ 20” to 3/8 16” adapter) to an articulating arm or 15mm rod end to give you quick release action. Does not include Zamerican arm or ZUD.
To prevent monitors from rotating, check out our Zicromount III.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $75.00
|
|
|
|
|
|
Zicromount III
|
See details
|
|
SKU: ZM-3
The ZicroMount III is used to mount any device with a ¼ 20” or a 3/816” inch (with a ¼ 20” to 3/8 16” adapter) screw hole. The Zicromount III is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, threaded articulating arm with Zacuto ZUDS or Zamerican Arm. The Zicromount III has the ability to attach to the device using two screws. The Zicromount III also has L shaped claws to prevent devices from turning and unwinding.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $92.00
|
|
|
|
|
|
DEMO Zicromount III
|
See details
|
|
SKU: ZM-3-DEMO
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The ZicroMount III is used to mount any device with a ¼ 20” or a 3/816” inch (with a ¼ 20” to 3/8 16” adapter) screw hole. The Zicromount III is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, threaded articulating arm with Zacuto ZUDS or Zamerican Arm. The Zicromount III has the ability to attach to the device using two screws. The Zicromount III also has L shaped claws to prevent devices from turning and unwinding.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $69.00
|
|
|
|
|
|
Zicro Mini
|
See details
|
|
SKU: Z-ZCM
The Zicro Mini is similar to our Zicromount & Zicromount III, except it is much thinner. The Zicro Mini was made specifically for the Zacuto EVF. It is included in the EVF Standard Mount, EVF Rod Mount and EVF Tri-Mount Kit. The Zicro Mini is a universal quick release mount that allows you to attach anything with a ¼” 20 screw hole to a 15mm rod. This includes Zacuto’s articulating arm series, the Zamerican Arms. The Zicro Mini is only recommended for smaller lightweight devices such as an EVF, LED light or small sound recorder like the Zoom H4N. It is not recommended for larger (6”+) monitors. For larger monitors, we recommend the Zicromount III.
Our price: $50.00
|
|
|
|
|
|
Z-Mount II
|
See details
|
|
SKU: Z-MO-2
The Z-Mount II allows you to mount a monitor or any device on a 15mm lightweight support rod. The Z-mount II is ideal for mounting a monitor to Zacuto Zgrips. This is a must for every DP or AC since it serves as a basic rigging device. The Z-mount II goes one step further by allowing a lens support to be mounted directly in the center of standard 15mm rail systems.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $100.00
|
|
|
|
|
|
Zandy
|
See details
|
|
SKU: Z-ZNDY
The Zandy allows you to mount a monitor, viewfinder, and many other devices using a Zamerican Arm off a 19mm studio rod. Ideal for mounting a monitor or the RED ONE EVF on a 19mm studio rod. If using an articulating arm, a ZUD is required. If you are looking to mount a device off a 15mm rod, check out the Z-Mount II.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $144.00
|
|
|
|
|
|
Ztudio
|
See details
|
|
SKU: Z-ZTD
The Ztudio is a z-release mount that allows you to mount a 19mm rod perpendicular to another 19mm rod. This is the perfect mount to use with the RED ONE Birger mount. It will solve all problems. Like all Zacuto equipment, the Ztudio is extremely light and strong. Release or tighten the Ztudio with a quarter turn of the lever.
Our price: $144.00
|
|
|
|
|
|
Zround Mount
|
See details
|
|
SKU: Z-RM
The Zround Mount is a retrofit to allow Zacuto DoubleMounts and MiniMounts to accept Z-Release Zamerican arm or ZUDS. ZUDs convert your 1/4 20", 3/8 16" screws to 15mm rods, thus allowing them to fit into Z-Mounts, 15mm Z-Locks, ZicroMounts and all other Zacuto 15mm locking devices. This gives quick release action to your Zacuto DoubleMount or MiniMount. The Zround Mount comes with a 3/8 16" and does not include DoubleMount, Zamerican arm or ZUD.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $120.00
|
|
|
|
|
|
Z-Mount Zwivel
|
See details
|
|
SKU: Z-MO-ZW
The Z-Mount Zwivel is similar to our Z-mount but with the ability to change the angle between the two 15mm rods. The Zwivel has one lever which controls the both 15mm holes. In order to change the angle of the rods, just loosen the single lever and the internal spring separates the parts for you to adjust to the desired angle. The Z-mount Zwivel is ideal for connecting a handgrip to a 15mm rod as it allows you to position your hand and wrist to the most comfortable position and extend the grip further way from your body.
Our price: $85.00
|
|
|
|
|
|
Zrod Lock Mount
|
See details
|
|
SKU: Z-ZLM
The Zrod Lock Mount is a 15mm right angle rod adapter. It slides onto a 15mm rod and tightens with the red lever. A 15mm male/female rod (any length) screws into the female threaded hole and secures with an Allen. This gives you a secure right angle connection that can still slide up and down your rig for individual comfort and accessory placement. The Zrod Lock Mount is the perfect piece if you own the EVF Tri Mount Kit and wish to mount it onto another manufactures rig or our Universal Baseplate. An additional male/female rod (not included) will be necessary.
Our price: $65.00
|
|
|
|
|
|
ZUD 1/4 20
|
See details
|
|
SKU: ZUD1/4 20
A ZUD 1/4" 20 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00
|
|
|
|
|
|
ZUD 3/8 16
|
See details
|
|
SKU: ZUD 3/8 16
A ZUD 3/8" 16 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00
|
|
|
|
|
|
ZUD1/4 20 M
|
See details
|
|
SKU: ZUD1/4 20 M
A ZUD 1/4" 20 male (retrofit any 1/4 20 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $49.00
|
|
|
|
|
|
ZUD 3/8 16 M
|
See details
|
|
SKU: ZUD 3/8 16 M
A ZUD 3/8" 16 male (retrofit any 3/8 16 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $49.00
|
|
|
|
|
|
Zdapter Stand Mount Kit
|
See details
|
|
SKU: Z-SM
The Zadapter Stand Mount Kit allows the Z-Release or Zamerican arms to mount to 5/8" light stands, c-stands or Panavision rods. It is ideal for mounting a monitor to a rolling stand in the studio.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $205.00
|
|
|
|
|
|
Zano
|
See details
|
|
SKU: Z-ZNO
The Zano is a combination of the Manfrotto Nano Clamp and the Zacuto Zicromount. The Zano allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zano onto such as tripod legs. The Zano clamp range is .51" to 1.38".
Our price: $95.00
|
|
|
|
|
|
Zaffer
|
See details
|
|
SKU: Z-ZFFR
Many people have been asking for it and now it's here. The Zaffer is a combination of the Avenger Super Clamp and the Zacuto Zicromount. The Zaffer allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zaffer on to, such as tripod legs. The Zaffer clamp range is .51" to 2.1".
Our price: $99.00
|
|
|
|
|
|
1/2 inch to 1/4 20 Adapter
|
See details
|
|
SKU: Z-arm-adpt
The ½” to ¼ 20” adapter can screw into any female Zacuto rod or
Zamerican arm. It adapts Zacuto Rods and Zamerican arms to a traditional ¼ 20” screw. It also retrofits a Z-release arm to a traditional screw type articulating arm.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $19.00
|
|
|
|
|
|
|
|
|
|
| Result pages: |
1 |
2 |
 |
|
|
