Zwiss Cage

Zacuto Home

Mailing List

Home

Cart

CALL Toll-Free: 888.294.FILM (3456) | In Chicago: 312.863.FILM (3456)

Zacuto :: DSLR Kits :: Zwiss Cage

Printable version

Shop By

Shop By Manufacturer

Anton Bauer
Blue Crane
Formatt Filters
F-Stop
Genus
Hot Rod Camera
Ikan
Litepanels
Marshall
Manfrotto
NanoFilm
Novoflex
Okii
Peachpit
Petroff
Storm
Switronix
Zoom

Zwiss Cage #Z-DZWC

View More Images

The Zacuto Zwiss Cage is an all in one portable mounting solution for your DSLR and accessories. Utilizing our Zwiss Cage Plate, the Zwiss Cage allows you to easily mount articulating arms, rods, monitors, lights, sound devices, and more. The Zwiss Cage Plate has multiple 1/4 20" and 3/8 16" holes so your mounting options are limitless. You also have two 15mm Z-Release holes on top of the cage. The Z-Release quick release system allows you to avoid screwing and unscrewing accessories. You can simply mount the accessories with our ZUDs or Zamerican Arms. The Zwiss Cage includes all black rods.

Attached to the top of the Zwiss Cage Plate is our Top Handle. This handle is attached to the Zwiss Cage Plate using (2) 1/4 20" screws, making it easily customizable to your shooting needs. If you are interested in purchasing the handle by itself, it will be available for purchase separately in a few weeks.

The Zwiss Cage Plate uses our DSLR Baseplate as its foundation. This plate is fully height adjustable for DSLRs with or without battery grips or tall body cameras like the Canon 1D Mark IV. The DSLR Baseplate also comes with a set of 3.5" rods, perfect for a follow focus or matte box. If you are using longer lenses, you can always add rod extensions to the front of these 3.5" rods, or swap the rods out entirely with a longer set.

The DSLR Baseplate quick release function allows your camera to be quick released from the rig by turning the red knob on the side of the DSLR Baseplate. Now you can switch between using the camera as part of the Zwiss Cage or on its own in seconds. The entire setup mounts to your tripod plate by using standard tripod screws, (2) ¼ 20” and (1) 3/8 16”.

If you own the DSLR Z-Cage and would like to convert to the Zwiss Cage, just contact sales@zacuto.com and we can help you out!

List Price: $1080

Details

Weight	2.00 lbs
Price:	$1,026.00

Options

Quantity

Add to cart

Add to wish list (Login Required)

Related products

#678

Zwiss Cage

The Zacuto Zwiss Cage is an all in one portable mounting solution for your DSLR and accessories. Utilizing our Zwiss Cage Plate, the Zwiss Cage allows you to easily mount articulating arms, rods, monitors, lights, sound devices, and more. The Zwiss Cage Plate has multiple 1/4 20" and 3/8 16" holes so your mounting options are limitless. You also have two 15mm Z-Release holes on top of the cage. The Z-Release quick release system allows you to avoid screwing and unscrewing accessories. You can simply mount the accessories with our ZUDs or Zamerican Arms.
The Zwiss Cage includes all black rods.
If you own the DSLR Z-Cage and would like to convert to the Zwiss Cage, just contact sales@zacuto.com and we can help you out!

List Price: $1080

Our price: $1,026.00

Amount:

#311

Z-Focus

Zacuto's Z-focus is an extremely accurate follow focus that allows the operator or assistant to pull focus. Features include: complete gear driven, no play, multiple gear pitches and more.

Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.

See customer reviews here!

Our price: $1,075.00

Gear Option

Amount:

#74

ZipGear- Prime lens kit

Zacuto Universal ZipGear prime lens kit includes four 13.5" adjustable gears and four gear locking housings. This kit is perfect for four prime lenses. Just wrap the gear around the lens, cut to size, press on gear locking housing and tighten. Installation takes one minute.

Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.

Our price: $265.00

Amount:

#642

Wireless Plate Pro

The Zacuto Wireless Plate Pro allows you to mount any size wireless, down-converter, video transmitter regardless of size, make, model or manufacturer with Velcro.

The Wireless plate can screw into the Zacuto Zwiss Plate, Zacuto Red Plate or can mount off a 15mm rod by using a Wireless bracket and a z-lock.

The Wireless Plate Pro is 3 5/8 x 3 5/8. The lip sticks out 1 3/8.

Our price: $55.00

Amount:

#244

ZUD1/4 20 M

A ZUD 1/4" 20 male (retrofit any 1/4 20 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.

Our price: $49.00

Amount:

#627

EVF Flip

The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.

The EVF Flip has a Z-Finder frame built into the unit that can be flipped open to 180 degrees. You can also pop off the Z-Finder and use the EVF as a monitor similar to the EVF Snap. You can use the Z-Finder Pro or Jr. on this model as well. This is essential when working handheld with a producer or director so that you can show them the shot without having to have them get their eye in the viewfinder. You just flip up and they can see the shot!

See more info and pics here!

See customer reviews here!

Our price: $775.00

Amount:

#679

Zwiss Cage Plate

Please allow 2-3 days to ship.

The Zwiss Cage Plate is an 11" long cheese plate that includes multiple 1/4 20" and 3/8 16" mounting holes as well as (4) 15mm mounting holes on the ends for a variety of uses. It differs from our standard Zwiss Plate in length. This length is needed so it can be used to create a cage like the DSLR Z-Cage and would like to convert to a Zwiss Cage, this is the plate you are looking for. In addition, if you want the handles staggered as we show on the Zwiss cage, you will need to purchase (2) Z-Mount IIs to replace the Z-Mount Zwivels on the existing z- cage. The vertical handles on the Zwiss Cage are staggered as opposed to being parallel like on the DLSR Z-Cage for more stability. If you have any questions or need help converting your Z-Cage to a Zwiss Cage, feel free to give us a call or email sales@zacuto.com.

Our price: $160.00

Amount:

#763

QR Handle

The QR Handle is a multi purpose top handle that can be used on the Scarlet, Epic cameras and other accessories such as the Zacuto Zwiss Cage. The handle is ideal for low-mode shooting and easy transport of your camera. The base of the handle attaches via (2) ¼” 20 screws (included) that are spaced 3/8" screw center to center at their closest to 2" 5/32" at their furthest. The Top Handle mounts to the base via Zacuto’s quick release Z-Rail system, allowing you to leave the base on the camera and remove the handle with the flip of a lever. The handle can be slid left or right on the Z-Rail to balance the camera’s center of gravity. Zacuto dovetail accessories are adjustable to work with Z-Rail, NATO, SWAT, RED, PICATINNY, and WOODEN CAMERA rails.

The handle and rods assembly is 7” long. Both ends of the handle are female threaded for extensions.

You can also mount other accessories to this handle by using our T-Mount (single hole) or Tri-Mount (dual hole). The T-Mount has (1) 15mm port that is secured with an Allen screw and (1) 15mm quick release hole. The port attaches to the Top Handle rod, giving you a 15mm hole to mount anything from your mic, EVF, light, recorder, etc. The dual hole Tri-Mount also has (1) 15mm port but includes (2) 15mm holes so you can mount two accessories at the same time. Click on the main image to see detailed pictures of both mounts. The T-Mount and Tri-Mount are not included with the QR Handle.

Our price: $220.00

Amount:

Add Checked Items to Cart