Zamerican, V3 Small
|
See details
|
 |
SKU: ZARM-S3
Zamerican V3 Small 6 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $195.00
|
|
|
|
|
|
Zamerican, V3 Medium
|
See details
|
|
SKU: ZARM-M3
Zamerican V3 Medium 9 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $205.00
|
|
|
|
|
|
Zamerican, V3 Large
|
See details
|
|
SKU: Zarm-L3
Zamerican, V3 Large 12 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $215.00
|
|
|
|
|
|
Zamerican Jr. Small
|
See details
|
|
SKU: ZARM-S2-1BP
Zamerican Jr. Small 5 inch articulating arm with one ball pivot is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $165.00
|
|
|
|
|
|
Zamerican Jr. Medium
|
See details
|
|
SKU: ZARM-M2-1BP
Zamerican Jr. Medium 8 inch articulating arm with one ball pivot is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $175.00
|
|
|
|
|
|
1/2 inch to 1/4 20 Adapter
|
See details
|
|
SKU: Z-arm-adpt
The ½” to ¼ 20” adapter can screw into any female Zacuto rod or
Zamerican arm. It adapts Zacuto Rods and Zamerican arms to a traditional ¼ 20” screw. It also retrofits a Z-release arm to a traditional screw type articulating arm.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $19.00
|
|
|
|
|
|
1/2 inch to 3/8 16 adapter
|
See details
|
|
SKU: Z-ADPT38
The ½” to ⅜ 16” adapter can screw into any female Zacuto Rod or Zamerican Arm. It adapts Zacuto Rods and Zamerican Arms to a traditional ⅜ 16” screw. It also retrofits our Z-Release arms to traditional screw type articulating arms.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $19.00
|
|
|
|
|
|
1/2 Rod Cap
|
See details
|
|
SKU: Z-RC-1
Zacuto rod caps are 1/2" threaded and used to screw into our rods or Zamerican Arms. Prevent your equipment from accidentally sliding off of your rods by screwing the 1/2 inch thread directly into a Zamerican arm or rod end. Rods caps are all black.
Our price: $12.00
|
|
|
|
|
|
DEMO Zicromount III
|
See details
|
|
SKU: ZM-3-DEMO
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The ZicroMount III is used to mount any device with a ¼ 20” or a 3/816” inch (with a ¼ 20” to 3/8 16” adapter) screw hole. The Zicromount III is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, threaded articulating arm with Zacuto ZUDS or Zamerican Arm. The Zicromount III has the ability to attach to the device using two screws. The Zicromount III also has L shaped claws to prevent devices from turning and unwinding.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $69.00
|
|
|
|
|
|
ZicroMount
|
See details
|
|
SKU: Z-ZC
The ZicroMount is used for mounting monitors, hard drives or any device that accepts a ¼ 20" screw or a 3/8 16” screw (with a ¼ 20” to 3/8 16” adapter) to an articulating arm or 15mm rod end to give you quick release action. Does not include Zamerican arm or ZUD.
To prevent monitors from rotating, check out our Zicromount III.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $75.00
|
|
|
|
|
|
Zicromount III
|
See details
|
|
SKU: ZM-3
The ZicroMount III is used to mount any device with a ¼ 20” or a 3/816” inch (with a ¼ 20” to 3/8 16” adapter) screw hole. The Zicromount III is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, threaded articulating arm with Zacuto ZUDS or Zamerican Arm. The Zicromount III has the ability to attach to the device using two screws. The Zicromount III also has L shaped claws to prevent devices from turning and unwinding.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $92.00
|
|
|
|
|
|
Zicro Mini
|
See details
|
|
SKU: Z-ZCM
The Zicro Mini is similar to our Zicromount & Zicromount III, except it is much thinner. The Zicro Mini was made specifically for the Zacuto EVF. It is included in the EVF Standard Mount, EVF Rod Mount and EVF Tri-Mount Kit. The Zicro Mini is a universal quick release mount that allows you to attach anything with a ¼” 20 screw hole to a 15mm rod. This includes Zacuto’s articulating arm series, the Zamerican Arms. The Zicro Mini is only recommended for smaller lightweight devices such as an EVF, LED light or small sound recorder like the Zoom H4N. It is not recommended for larger (6”+) monitors. For larger monitors, we recommend the Zicromount III.
Our price: $50.00
|
|
|
|
|
|
Zangle
|
See details
|
|
SKU: Z-ZNG
Zacuto’s Zangle will give you another option in mounting your rods. With the zangle, you can attach rods at a 90 degree angle to fit your custom rigging needs as in building a cage or DSLR handle! There are two 15mm holes that accept a female end of a rod. Using an included allen key, simply loosen the allen screw to insert the rods, and tighten to get a secure hold.
Our price: $40.00
|
|
|
|
|
|
Z-Mount II
|
See details
|
|
SKU: Z-MO-2
The Z-Mount II allows you to mount a monitor or any device on a 15mm lightweight support rod. The Z-mount II is ideal for mounting a monitor to Zacuto Zgrips. This is a must for every DP or AC since it serves as a basic rigging device. The Z-mount II goes one step further by allowing a lens support to be mounted directly in the center of standard 15mm rail systems.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $100.00
|
|
|
|
|
|
Zround Mount
|
See details
|
|
SKU: Z-RM
The Zround Mount is a retrofit to allow Zacuto DoubleMounts and MiniMounts to accept Z-Release Zamerican arm or ZUDS. ZUDs convert your 1/4 20", 3/8 16" screws to 15mm rods, thus allowing them to fit into Z-Mounts, 15mm Z-Locks, ZicroMounts and all other Zacuto 15mm locking devices. This gives quick release action to your Zacuto DoubleMount or MiniMount. The Zround Mount comes with a 3/8 16" and does not include DoubleMount, Zamerican arm or ZUD.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $120.00
|
|
|
|
|
|
Zdapter Stand Mount Kit
|
See details
|
|
SKU: Z-SM
The Zadapter Stand Mount Kit allows the Z-Release or Zamerican arms to mount to 5/8" light stands, c-stands or Panavision rods. It is ideal for mounting a monitor to a rolling stand in the studio.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $205.00
|
|
|
|
|
|
Zandy
|
See details
|
|
SKU: Z-ZNDY
The Zandy allows you to mount a monitor, viewfinder, and many other devices using a Zamerican Arm off a 19mm studio rod. Ideal for mounting a monitor or the RED ONE EVF on a 19mm studio rod. If using an articulating arm, a ZUD is required. If you are looking to mount a device off a 15mm rod, check out the Z-Mount II.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $144.00
|
|
|
|
|
|
Ztudio
|
See details
|
|
SKU: Z-ZTD
The Ztudio is a z-release mount that allows you to mount a 19mm rod perpendicular to another 19mm rod. This is the perfect mount to use with the RED ONE Birger mount. It will solve all problems. Like all Zacuto equipment, the Ztudio is extremely light and strong. Release or tighten the Ztudio with a quarter turn of the lever.
Our price: $144.00
|
|
|
|
|
|
EVF Zwivel compatible with RED ONE camera
|
See details
|
|
SKU: Z-RC-ZWIVEL
The EVF Zwivel gives you more adjustability and movement for your RED EVF. The mount slides onto the top 19mm or 15mm rod on your RED ONE camera. The EVF Zwivel comes with all black rods and mounts one of two ways. If your top rod is 15mm you will get the Z-Mount., if it is 19mm then you will need the Zandy. You will make this selection at checkout. This EVF Zwivel has the ability to slide the EVF forward and backward, up and down as well as a complete 360 degree swivel, left and right, up and down.
RED ONE trademark owned by RED Digital Cinema. Zacuto is not affiliated with RED Digital Cinema.
Our price: $412.00
|
|
|
|
|
|
Camera Zdapter compatible with RED ONE camera
|
See details
|
|
SKU: Z-RCZM
A great mount for RED ONE camera users that allows you to quick-release your monitor or EVF with a flip of a red Zacuto lever. It mounts onto 19mm or 15mm rods and adapts the RED arm with a Zacuto ZUD. It prevents any unwinding and enables you to lengthen the RED ONE arm with Zacuto 15mm rods.
RED ONE trademark owned by RED Digital Cinema. Zacuto is not affiliated with RED Digital Cinema.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $249.00
|
|
|
|
|
|
ZUD 1/4 20
|
See details
|
|
SKU: ZUD1/4 20
A ZUD 1/4" 20 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00
|
|
|
|
|
|
ZUD 3/8 16
|
See details
|
|
SKU: ZUD 3/8 16
A ZUD 3/8" 16 is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $44.00
|
|
|
|
|
|
ZUD1/4 20 M
|
See details
|
|
SKU: ZUD1/4 20 M
A ZUD 1/4" 20 male (retrofit any 1/4 20 female with Z-Release) is used to retrofit your existing articulating arm, giving you Zacuto Z-Release (quick release) action on one or both ends of the articulating arm. ZUDs are now all black. ZUDs convert your 1/4" 20 or 3/8" 16 screws to 15mm rods, thus allowing them to fit into Zacuto Z-Release components like Z-mounts, 15mm Z-locks, ZicroMounts and all other Zacuto 15mm locking devices. An additional feature of a ZUD; any Zacuto male rod can screw into the end of the ZUD allowing you to create an extension to your articulating arm. The articulating arm is not included.
Our price: $49.00
|
|
|
|
|
|
|
|
|
|
