Q-Release
|
See details
|
 |
SKU: Z-QR
The Q-Release allows you to mount the Zacuto shoulder pad underneath your camera for better counter-balance when using a Depth-of-field adapter or camera package lengths up to 36 inches. It allows you to move the center of gravity forward. It also has a handy quick release that allows you to quickly mount and un-mount the shoulder pad.
No rods are included or necessary.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $175.00
|
|
|
|
|
|
Wireless Plate
|
See details
|
|
SKU: Z-WP1
The Zacuto wireless plate allows you to mount any size wireless, down-converter, video transmitter regardless of size, make, model or manufacturer with Velcro.
The Wireless plate can screw into the Zacuto Red Plate or can mount off a 15mm rod by using a Wireless bracket , and a z-lock.
The Wireless Plate is 4 5/8 x 4 3/4. The lip sticks out 1 3/8.
Our price: $80.00
|
|
|
|
|
|
Z-Riser
|
See details
|
|
SKU: Z-RI
The Z-Riser includes 4.5" female rods and attaches to 15mm lightweight rods with standard 60mm spacing between the rods. It allows you to raise or lower a new set of 15mm rods to accommodate accessories, like a matte box/follow focus. A Z-riser is necessary for most Depth-Of-Field adapters such as the Letus35 Adapters. A Z-riser is also necessary for the RED ONE Camera setups where lens height is extremely high.
Universal Baseplate not included.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $330.00
|
|
|
|
|
|
Jeep
|
See details
|
|
SKU: Z-J-1
Jeep - Zacuto's universal rod adapter easily bridges the gap between 15mm lightweight (60mm spacing), 15mm studio (100mm spacing) and 19mm studio (104mm spacing) rail systems. This versatile tool expands the functionality of your equipment by allowing you to mix and match gear that was intended for different size rail systems.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $265.00
|
|
|
|
|
|
Zwiss Plate
|
See details
|
|
SKU: Z-ZWP
The Zacuto Zwiss Plate is Zacuto’s multi-purpose mounting plate. It allows you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. A second set of rods can be mounted through the top of the plate if you wish to extend your rig at another level. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate is also designed to work with our new Wireless Plate for mounting multiple wireless receivers.
You can use the Zwiss Plate to mount a variety of accessories or brick style batteries and battery plates. The Zwiss Plate works with both Anton Bauer 3-Stud and V-Mount style batteries. The battery plate and battery mounted on the Zwiss Plate can double as counterbalance. You can still add more counterbalance by adding our Z-Lite weights to the back of the rig along with the Zwiss Plate. Our Zamerican quick release arms mount directly into the 15mm holes of the plate and are perfect for mounting lights, monitors and audio devices. It now comes with the (4) screws needed to mount the AJA Ki Pro Mini. With plenty of ¼ 20” and 3/8 16” holes, your mounting options are limitless.
Our price: $149.00
|
|
|
|
|
|
Zwiss Cage Plate
|
See details
|
|
SKU: Z-ZCP
Please allow 2-3 days to ship.
The Zwiss Cage Plate is an 11" long cheese plate that includes multiple 1/4 20" and 3/8 16" mounting holes as well as (4) 15mm mounting holes on the ends for a variety of uses. It differs from our standard Zwiss Plate in length. This length is needed so it can be used to create a cage like the DSLR Z-Cage and would like to convert to a Zwiss Cage, this is the plate you are looking for. In addition, if you want the handles staggered as we show on the Zwiss cage, you will need to purchase (2) Z-Mount IIs to replace the Z-Mount Zwivels on the existing z- cage. The vertical handles on the Zwiss Cage are staggered as opposed to being parallel like on the DLSR Z-Cage for more stability. If you have any questions or need help converting your Z-Cage to a Zwiss Cage, feel free to give us a call or email sales@zacuto.com.
Our price: $160.00
|
|
|
|
|
|
Grill Adapter
|
See details
|
|
SKU: Z-GRL
The Grill adapter attaches a Jeep to a Universal Baseplate which allows the Zacuto baseplate to have 19mm studio, 15mm studio rods (Arri) or 15mm lightweight rods off the front of the baseplate. The track built-in to the Grill adapter allows you to adjust all rods to whatever lens height you need, like a built-in Z-riser. Left to right movement is achieved with the Zacuto baseplate.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $59.00
|
|
|
|
|
|
Shoulder Pad, includes 7-inch rods
|
See details
|
|
SKU: Z-SP1
The shoulder pad can be mounted three different ways; it can screw into Zacuto rod extensions, it can be mounted directly underneath your rod system to achieve counterbalance with DOF camera rigs by using a Zacuto Q-release or it can be used in conjunction with the Zacuto Zoffset. The Zoffset is used with professional camcorders that have the viewfinders positioned in the center in order to have your eye positioned comfortably in the viewfinder.
The Shoulder Pad includes 7” rods.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $250.00
|
|
|
|
|
|
1/4 20" Lens Support
|
See details
|
|
SKU: Z-1/4-LS
The 1/4 20" Lens Support uses a 1/4 20" screw to screw directly into a variety of lenses for more support. This lens support clamps to the rods from underneath so it can quickly be taken off the rods. The middle rod that attaches to the lens has vertical adjustment, if needed (please select the rod size below). Only thumb screw tightening is necessary, no tools required. This lens support can be used with a variety of rod sizes. Please select the rods that are being used below for the q-mount.
1/4 20" Lens Support Includes:
Rod (please select the size of rod needed)
1/2" to 1/4 20" adapter
Q-Mount Lightweight (if a different size Q-Mount is needed, please call)
Our price: $237.00
|
|
|
|
|
|
Zoffset
|
See details
|
|
SKU: Z-Off
The Zoffset is used in conjunction with the Zacuto Shoulder Pad. It allows you to shift the lightweight support rods 3 inches to the right and 2 inches up, thus enabling you to position your eye comfortably in the viewfinder of most palm camcorders that have viewfinders in the back and center. It is meant to be used as part of a Zacuto Universal Baseplate System.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $255.00
|
|
|
|
|
|
3/8 16" Lens Support
|
See details
|
|
SKU: Z-3/8-LS
The 3/8 16" Lens Support uses a 3/8 16" screw to screw directly into a variety of lenses for more support. This lens support clamps to the rods from underneath so it can quickly be taken off the rods. The middle rod that attaches to the lens has vertical adjustment, if needed (please select the rod size below). Only thumb screw tightening is necessary, no tools required. This lens support can be used with a variety of rod sizes. Please select the rods that are being used below for the q-mount.
3/8 16" Lens Support Includes:
Rod (please select the size of rod needed below)
1/2" to 3/8 16" adapter
Q-Mount Lightweight (if a different size Q-Mount is needed, please call)
Our price: $237.00
|
|
|
|
|
|
Z-Lite
|
See details
|
|
SKU: Z-LTE
The Z-lite is a (just under) 3.5 lb. counterbalance weight to balance camera packages that are slightly front heavy. It slides onto 15mm rods, either both rods or on one rod. The Z-Lite is stainless steel with rubber o-rings to prevent hard contacts. A built in lever makes for easy mounting and removal. The Z-lite is great for DSLR packages.
Our price: $185.00
|
|
|
|
|
|
Zian
|
See details
|
|
SKU: Z-ZN
The Zian is a locking lens support that uses a 1/4 20" screw to screw directly into a variety of lenses. The 1/4 20" screw can be adapted to other thread sizes to accommodate all lenses. The 1/4 20" screw has the ability to move approximately 3/4" side to side. Only thumb screw tightening is necessary, no tools required.
The Zian can be purchased seperately or as a kit.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $185.00
|
|
|
|
|
|
Zian Lens Support Kit
|
See details
|
|
SKU: Z-ZN-K
The Zian is a locking lens support that uses a 1/4 20" screw to screw directly into a variety of lenses. The 1/4 20" screw can be adapted to other thread sizes to accommodate all lenses. The 1/4 20" screw has the ability to move approximately 3/4" side to side. Only thumb screw tightening is necessary, no tools required.
The Zian can be purchased seperately or as a kit.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $395.00
|
|
|
|
|
|
Z-stop
|
See details
|
|
SKU: Z-Stop
The Z-stop is a handy tool for anyone using a depth-of-field adapter (DOF). It slides onto a 15mm rod and keeps your original camera lens from moving when using a depth-of-field adapter. No more accidentally moving the camera lens out of focus!
Our price: $95.00
|
|
|
|
|
|
Zupport
|
See details
|
|
SKU: Zup-1
The Zupport is a lens support that screws into the bottom of any Zacuto male rod, which can be mounted with any Zacuto mount that accepts 15mm rods; this includes the Q-Mount’s (all sizes) and the Z-Mount II. A Zip Gear can be strapped around the lens and secured to the Zupport for added stability and to prevent it from rotating.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $82.00
|
|
|
|
|
|
HVX200 Heavy Load Support
|
See details
|
|
SKU: HVX-HLS
The Zacuto HVX200 Heavy Load Support (HVX-HLS) helps to support the HVX200 handle against potentially harmful downward pressure. This is especially important when any weight is placed on top of the HVX200 handle. The Heavy Load Support even protects the HVX200 against external pressure when it is in its case. Now you can even turn the case upside-down. However, the HVX Heavy Load Support does not protect against the less dangerous upward pressures.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Zacuto in no way warranties HVX200 handle breakage with the use of the HVX-HLS. The Zacuto lifetime warranty is for the repair or replacement of the HVX-HLS only.
Our price: $75.00
|
|
|
|
|
|
Zano
|
See details
|
|
SKU: Z-ZNO
The Zano is a combination of the Manfrotto Nano Clamp and the Zacuto Zicromount. The Zano allows you to attach 15mm rods or Zamerican arms to mount monitors, lights, hard drives and so on, to anything you can clamp the Zano onto such as tripod legs. The Zano clamp range is .51" to 1.38".
Our price: $95.00
|
|
|
|
|
|
Zonitor Handheld Kit for 15mm rods or 19mm rods
|
See details
|
|
SKU: Z-ZHH
The Zonitor Handheld mount kit allows you to quick-release a monitor from a Zamerican articulating arm and the arm from the Zacuto 15mm Z-Mount or 19mm Zandy. This kit allows you to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole, such as an external on-board monitor, lights, and/or hard drives, using a Zamerican Arm. The arm is mounted on one rod using a Zacuto 15mm Z-Mount or 19mm Zandy (please select).
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
List Price: $407.00
Our price: $386.65
|
|
|
|
|
|
Zonitor ENG Small Kit
|
See details
|
|
SKU: Z-ZENGS
The Zonitor ENG Small mount kit allows you to quick-release a monitor from a Zamerican articulating arm and the arm from the top of your camera. This kit allows you to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole, such as an external on-board monitor, lights, and/or hard drives, using a Zamerican Arm. The arm is mounted on a Zicromount III that is attached to your camera's handle. The Zicromount III prevents unwinding with the use of the L prongs.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
List Price: $379.00
Our price: $360.00
|
|
|
|
|
|
Zonitor ENG Large Kit
|
See details
|
|
SKU: Z-ZENGL
The Zonitor ENG Large mount kit allows you to quick-release a monitor from a Zamerican articulating arm and the arm from the top of your camera. This kit allows you to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole, such as an external on-board monitor, lights, and/or hard drives, using a Zamerican Arm. The arm is mounted on a Zicromount III that is attached to your camera's handle. The Zicromount III prevents unwinding with the use of the L prongs.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
List Price: $399.00
Our price: $379.00
|
|
|
|
|
|
Zonitor Lightweight Kit
|
See details
|
|
SKU: Z-ZLTW
The Zonitor Lightweight mount kit allows you to quick-release a monitor from a Zamerican articulating arm and the arm from the Zacuto Q-mount. This kit allows you to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole, such as an external on-board monitor, lights, and/or hard drives, using a Zamerican Arm. The arm is mounted on a set of 15mm lightweight rods using the q-mount.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
List Price: $505.00
Our price: $480.00
|
|
|
|
|
|
Zound Rod
|
See details
|
|
SKU: Z-ZND-R
The Zound Rod is a quick release Zacuto mount used to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole to a 15mm or 19mm rod system using a Zamerican arm. This kit is particularly designed to mount a sound device but can also be used to mount lights. For on-board monitors, we would recommend our Zonitor Handheld Kit.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
List Price: $434.00
Our price: $412.30
|
|
|
|
|
|
|
|
|
|
