Z-Finder Mounting Frame for Canon 5D
|
See details
|
 |
SKU: Z-MF5D
The Z-Finder Mounting Frame is specific for the Canon 5D Mark II camera only. The Z-Finder Mounting frame that is included with the Z-Finder Pro is a Universal Frame and it will with the Canon 5D, Canon 7D, Canon T2i and more. However, if you want a frame where the red thumb screws on the gorilla plate will cover the entire frame than this is your frame.
Please note, that this will NOT work with the 5D with battery grip, 7D, Canon T2i or any other camera. It will work solely on the Canon 5d Mark II. If you are using the cameras with a battery grip, then the battery grip frame is needed.
Our price: $63.00
|
|
|
|
|
|
.8 pitch 1 3/8" diameter gear
|
See details
|
|
SKU: Z-G-.8
.8 pitch 1 3/8" diameter gear for Z-Focus
If you are using a Z-Focus that was purchased before January of 2010, please call for a different style gear. This gear will not work with your Z-Focus.
Our price: $90.00
|
|
|
|
|
|
DSLR Handle
|
See details
|
|
SKU: Z-DSLR-H
The DSLR Handle is a sturdy versatile handle that mounts onto any 15mm rod system using our Z-mount Zwivel. It is the perfect solution for low mode shooting, lifting your rig on and off your shoulder, as well as a quick and easy way to carry your rig. The handle can swivel and slide so you can position it at the rigs center of gravity for perfect balance. You can also mount additional accessories onto the handle rod by using Z-mounts that will enable you to attach anything from a Zamerican arm, additional 15mm rods, lights and mics. The DSLR Handle is quick releasable from the rig by the twist of a lever. This is the perfect handle for all DSLR rig owners. The DSLR Handle is all black.
Our price: $250.00
|
|
|
|
|
|
Z-Finder Storage Case
|
See details
|
|
SKU: Z-BG
The Z-Finder Storage Case is compatible with all Z-Finder models. It is a black bag with an embroidered Zacuto logo. It closes using Velcro. It can also attach to a belt to wear around your waist. This bag is sure to keep your Z-Finder clean and safe in your camera bags. The dimensions are: 8x5x4 inches.
Our price: $23.00
|
|
|
|
|
|
Z-Bands
|
See details
|
|
SKU: Z-BNDS
Z-Bands are an option for the Zacuto Z-Finder. The Z-Bands are elastic rubber bands to help hold the Z-finder in place, it is not a way to hold the z-finder on the camera. The Z-Bands are just a security measure to hold the z-finder in place in case of accidental bumping just like the lanyard. The mounting frame and the Z-Bands must be used together. The Z-bands include 4 red aluminum balls and two elastic bands.
The Z-Bands work with the Z-Finder V2 and the Z-Finder Pros. They will not work with the Z-Finder JR.
Our price: $16.00
|
|
|
|
|
|
Z-Finder V2 Protective Upgrade
|
See details
|
|
SKU: Z-FPU
Please note: Not pictured, but included with this kit is a Z-Finder eyecup.
This kit is for Z-Finder V2 owners. It includes a protective boot, lens cap and new eyecup. The protective boot covers the threads on the Z-Finder V2 to prevent dust getting into the threads. The lens cap is to cover the lens to protect the lens from getting scratched when not in use. It also covers the lens to protect the LCD screen from sun damage when the z-finder is not being used. A new eye cup is needed in order for the lens cap to fit.
Our price: $12.00
|
|
|
|
|
|
Docu Baseplate Kit
|
See details
|
|
SKU: Z-DOCU
Our Docu kit was designed for use on a tripod, dolly or Steadicam with a documentary shooter in mind. Our Universal Baseplate rod system allows you to mount a matte box, follow focus and monitor or hard drive. The Zamerican arm uses Zacuto Z-Release technology to quickly release the monitor or hard drive to make setup and location moves quick and easy.
Zacuto’s baseplate kits are universal and quick-releasable; they can be used with any 15mm lightweight accessories, follow focuses & matte boxes. The kits are designed to be used with current and future models of cameras & camcorders such as the: Panasonic AF-100, HVX200a, DVX100a/b, Canon XL-H1, XL2, GL2, XH-A1 Sony XDCAM EX1, EX3, SO-HVR-Z1U, VX2000, PD-150, PD-170, JVC GY-HD100U, JVC GY-HM100U, HD200U, HD250U, Silicon Imaging SI2K, RED ONE, and many more.
Check out our foam inserts and cases for your camera rig!
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
List Price: $1,065.00
Our price: $1,012.00
|
|
|
|
|
|
Newsman Baseplate Kit
|
See details
|
|
SKU: Z-NEWS
Our Newsman Kit allows you to shoulder mount your camera for quick, rugged ENG shooting. The rig can be easily balanced with a few quick adjustments and gives smaller 1/3” or ½” cameras the stability of a larger shoulder-mounted camera, which will produce smoother shots. The Zoffset shifts the shoulder pad vertically and horizontally allowing the shooter to comfortably align his eye in the viewfinder on camera models where they are center mounted.
Zacuto’s baseplate kits are universal and quick-releasable; they can be used with any 15mm lightweight accessories, follow focuses & matte boxes. The kits are designed to be used with current and future models of cameras & camcorders such as the: Panasonic HVX200a, DVX100a/b, Canon XL-H1, XL2, GL2, XH-A1 Sony XDCAM EX1, EX3, SO-HVR-Z1U, VX2000, PD-150, PD-170, JVC GY-HD100U, JVC GY-HM100U, HD200U, HD250U, Silicon Imaging SI2K, RED ONE, and many more.
Check out our foam inserts and cases for your camera rig!
List Price: $1,990.00
Our price: $1,890.00
|
|
|
|
|
|
Cine Baseplate Kit
|
See details
|
|
SKU: Z-CINE
Our Cine kit is ideal for the cinematographer shooting film style on a tripod, dolly or Steadicam. Zacuto was the first to design a camera package using rods behind the camera for mounting and counterbalance. The mount behind the camcorder holds batteries to power the monitor and accessories and provide a counterbalance to offset the weight of the camera and accessories. The Zamerican arm uses Zacuto Z-Release technology to quickly release the monitor or hard drive to make setup and location moves quick and easy. Attach your wireless microphone receiver, down-converters or video transmitters to the wireless plate and you are ready to shoot!
Zacuto’s baseplate kits are universal and quick-releasable; they can be used with any 15mm lightweight accessories, follow focuses & matte boxes. The kits are designed to be used with current and future models of cameras & camcorders such as the: Panasonic AF-100, HVX200a, DVX100a/b, Canon XL-H1, XL2, GL2, XH-A1 Sony XDCAM EX1, EX3, SO-HVR-Z1U, VX2000, PD-150, PD-170, JVC GY-HD100U, JVC GY-HM100U, HD200U, HD250U, Silicon Imaging SI2K, RED ONE, and many more.
Check out our foam inserts and cases for your camera rig!
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
List Price: $1,557.00
Our price: $1,479.00
|
|
|
|
|
|
Z-Focus
|
See details
|
|
SKU: Z-FF-1
Zacuto's Z-focus is an extremely accurate follow focus that allows the operator or assistant to pull focus. Features include: complete gear driven, no play, multiple gear pitches and more.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
See customer reviews here!
Our price: $1,075.00
|
|
|
|
|
|
Zephyr
|
See details
|
|
SKU: Z-ZEPH
The Zephyr, Zacuto's 15mm lightweight support plate, works on all Sony and Panasonic ENG style cameras that use the V-Wedge tripod plates, except for the Panasonic 300 Series. For any Panasonic 300 Series camera, you will need the Zephyr300. The Zephyr It allows you to adjust the 15mm rods up, down, left & right to align your matte box to the lens.
The Zephyr includes two 8” rods. For extra long lenses, rod extensions may be necessary.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $625.00
|
|
|
|
|
|
Flippable Reversible Z-Focus
|
See details
|
|
SKU: Z-FF-1-FR
Zacuto's Flippable Reversible Z-Focus is an extremely accurate follow focus for 15mm lightweight rods. The mechanism utilizes a set of gears that connect to and spin the focus ring or Zacuto zip gear on the camera lens. The white disk allows the focus puller to create distance marks for repeatable focus pulls. This Z-Focus has a new flippable design so you can quickly remove the follow focus and flip it from the operator to the assistant side in seconds. It also has a reversible feature which allows you to quickly reverse the direction of the follow focus drive unit so it rotates in the opposite direction which is useful when focusing Nikon lenses.
Our price: $1,675.00
|
|
|
|
|
|
Zephyr300
|
See details
|
|
SKU: Z-ZEPH300
The Zephyr300 is Zacuto's 15mm lightweight support plate custom made for the Panasonic HPX300 and other 300 series cameras. It works in conjunction with a Quick-Release Tripod Plate (not included with the camera) and the actual stainless steel V-Wedge triangle from the HPX300 camera. Zephyr300 allows you to adjust the 15mm rods up, down, left & right to align your matte box to the lens on the camera. You can also mount a follow focus or lens support if desired. It has a unique long design, with an opening in the bottom which gives room for adjusting buttons in the lower front of the camera. This design is extremely lightweight yet very strong. Like all Zacuto products, it is made from the highest quality materials, built to the most extreme tolerances and backed with a lifetime warranty.
This is the only plate on the market for the NEW Panasonic HPX300, since Panasonic changed the way LWS plates mount to the bottom of their cameras. After attempting to make a spacer for the new Panasonic, we decided that it would simply be easier to make a custom Zephyr plate.
The Zephyr includes two 6.5" rods. For extra long lenses, rod extensions may be necessary.
Our price: $565.00
|
|
|
|
|
|
Studio *Flippable* Z-Focus
|
See details
|
|
SKU: Z-FF-S
Zacuto's Studio Z-Focus is an extremely accurate follow focus for 15mm and 19mm studio rods. The mechanism utilizes a set of gears that connect to and spin the focus ring or Zacuto zip gear on the camera lens. The white disk allows the focus puller to create distance marks for repeatable focus pulls. The Studio Z-focus has a new flippable design so you can quickly remove the follow focus and flip it from the operator to the assistant side in seconds.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $1,600.00
|
|
|
|
|
|
Zephyr700
|
See details
|
|
SKU: Z-ZEPH700
The Zephyr700 is Zacuto's 15mm lightweight support plate custom made for the JVC GY-HM700UXT & JVC GY-HM700U. It works in conjunction with the Tripod Adapter Plate (not included with the camera) and the actual stainless steel V-Wedge triangle from the JVC camera. Zephyr700 allows you to adjust the 15mm rods up, down, left & right to align your matte box to the lens on the camera. You can also mount a follow focus or lens support if desired. It has a unique long design, with an opening in the bottom which gives room for adjusting buttons in the lower front of the camera. This design is extremely lightweight yet very strong. Like all Zacuto products, it is made from the highest quality materials, built to the most extreme tolerances and backed with a lifetime warranty.
This is the only plate on the market for the NEW JVC 700 series camera, since JVC changed the way LWS plates mount to the bottom of their cameras.
The Zephyr700 includes two 6.5" rods. For extra long lenses, rod extensions may be necessary.
Product is the Zephyr700 plate only. Everything else in picture not included.
Our price: $565.00
|
|
|
|
|
|
.8 Wide Pitch Gear for Z-Focus
|
See details
|
|
SKU: Z-G-WIDE
.8 (32) Wide Pitch Gear for Z-Focus . For use with still lenses.
If you are using a Z-Focus that was purchased before January of 2010, please call for a different style gear. This gear will not work with your Z-Focus.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $185.00
|
|
|
|
|
|
Universal lightweight support system with Z-Release
|
See details
|
|
SKU: Z-LWS
The Zacuto Lightweight Support System (LWS) comes with Z-Release for all professional 2/3”, 1/2" sized cameras as well as prosumer cameras such as the JVC GY-HD100/200/250 and/or the Canon XL-H1. The LWS gives you the ability to mount rods to the front of your camera so that you can attach matte boxes and follow focus units. This system was designed to be used with a wedge style tripod plate. Zacuto has taken this several steps further. This is the first universal lightweight support plate to work with all Sony, Panasonic, Canon and JVC cameras that use the wedge style tripod plate, meaning that one plate can be used for all cameras. When you get a new camera, you can still use the Z-LWS.
Please refer to our Z-release System for an overview of our products.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $850.00
|
|
|
|
|
|
.8 Pitch 1" Diameter Gear
|
See details
|
|
SKU: Z-G-1
Our .8 pitch 1" diameter gear for Zacuto Z-Focus models gives you less lens rotation on your still camera lenses for more accurate focus pulling.
If you are using a Z-Focus that was purchased before January of 2010, please call for a different style gear. This gear will not work with your Z-Focus.
Our price: $90.00
|
|
|
|
|
|
.8 Pitch 2 1/4" Diameter Gear
|
See details
|
|
SKU: Z-G-6CM
.8 Pitch 2 1/4" Diameter Gear for Z-Focus
If you are using a Z-Focus that was purchased before January of 2010, please call for a different style gear. This gear will not work with your Z-Focus.
Our price: $185.00
|
|
|
|
|
|
Z-Focus 3D Dry Erase Operator's Marking Disc
|
See details
|
|
SKU: Z-FF-OD
Zacuto's Z-Focus 3D Dry Erase Operator's Marking Disc is a new 3D marking disc that allows the camera operator to see focus marks while operating the camera. This disc is magnetic and dry erase. This disc fits on all Zacuto follow focuses.
Our price: $45.00
|
|
|
|
|
|
Mini Baseplate with 12in Rods
|
See details
|
|
SKU: Z-M-UB
The Zacuto Mini Baseplate (Z-M-UB) is a smaller version of the Zacuto Universal Baseplate (Z-UB3). The Mini Baseplate has many of the same features as the Universal Baseplate but was designed for use with smaller cameras like the RED Epic and Scarlet, as well as DSLRs like the Nikon D90, Canon 5d Mark II. The Mini Baseplate can also be used with Midsized flat bottom cameras like the Panasonic HPX170, HVX200, Sony EX1, and other cameras of this size as well as Small HD cameras like the Canon HV20, HV30, and so forth.
The Mini Baseplate now has a ¼” 20 screw, a 3/8” 16 screw, and a locking pin on the base to allow you to mount your camera. If you need (2) 3/8” 16 screws, you can purchase our 3/8 16 to 1/4 20 Screw Adapter and convert the ¼” 20 screw that is included to a 3/8” 16 screw (Needed for the RED Epic and Scarlet). The mini baseplate attaches to the tripod plate with both 3/8 16" and 1/4 20" screws. The Mini Baseplate has up and down as well as side to side adjustments, allowing it to align all cameras with various matte boxes and follow focus units. The Mini Baseplate is supplied with 12” female/female threaded rods.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
If using an FS100 with a matte box, a Z-Spacer or Quick-Release Plate is needed to raise the camera to the propert height needed.
Our price: $430.00
|
|
|
|
|
|
Zwhip
|
See details
|
|
SKU: Z-W1
Zacuto's new and improved 16 inch follow focus whip with vinyl covering and anti-bend memory improvements. Works with Chrosziel's follow focuses, Zacuto's Follow Focus and all other follow focus units with a standard square connector.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $149.00
|
|
|
|
|
|
|
|
|
|
