HVX200 Repeatable Focus Ring with Stops
|
See details
|
 |
SKU: Z-RP-HVX
Zacuto custom HVX200 repeatable focus ring with stops. The only product of its kind to allow the HVX200 to switch between having stardard hard stops at minimum focus/infinity and Macro mode.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
This is a demo item that was on display at conventions. Some might be slightly scratched but still have the Zacuto lifetime warranty. Limited quantities at a special clearance price- order yours today!
Was: $390
Now: $190
Our price: $190.00
|
|
|
|
|
|
Cine Foam Insert
|
See details
|
|
SKU: Z-FI-HVXCINE
The Zacuto Cine Foam Insert holds an HD monitor, accessory block, charger, batteries, Zamerican articulating arms, wireless plates and more. Fits in Storm IM-2700 or Pelican 1600. The case is not included in the price. The hard case is available for purchase below.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $155.00
|
|
|
|
|
|
DOF Adapter Foam Insert
|
See details
|
|
SKU: Z-DOF-FI
Keeping the camera package fully assembled makes for less breakage and faster setup. The DOF Adapter Foam Insert holds 6 Nikon/Zeiss Prime lenses, rod extensions, the Q-Release with shoulder pad, and a RedRock M2, Letus35 or Brevis. The DOF Adapter Foam Insert is intended to fit the Storm Case IM-2700. The case is not included in the price. The hard case is available for purchase below.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $180.00
|
|
|
|
|
|
Camera Accessories Foam Insert
|
See details
|
|
SKU: Z-23accces-FI
The Camera Accessories Foam Insert holds a matte box, a follow focus, a whip, 15 4x5.650 filters, tapes, articulating arms, rods, porta brace monitor bag, cables and more. It is designed to fit the IM-2950 Storm case or the Pelican 1650 case. The hard case is available for purchase below.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $285.00
|
|
|
|
|
|
ENG camera foam insert
|
See details
|
|
SKU: Z-23-FI
The ENG camera foam insert fits all Sony and Panasonic cameras, including the new HPX300. It holds the 8.4" monitor, a dual or quad chargers, four Hytron 160 batteries, a tripod plate, cables, manual, and a P2 card reader or tape stock. It fits the IM-2975 Storm case. This case can be ordered below.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $299.00
|
|
|
|
|
|
SonyEX3 DOF Foam Insert
|
See details
|
|
SKU: Z-FI-SCDOF-EX3
Zacuto's DOF Sony EX3 Foam will fit the Sony EX3 with any of our DOF kits fully assembled. It fits into a Storm Case IM-2975 which is not included. Actual weight is 3 lbs, but for shipping we use the dimensional weight, which is 17 lbs.
Our price: $315.00
|
|
|
|
|
|
Panasonic / Sony Handheld/Studio Foam Insert
|
See details
|
|
SKU: Z-FI-SCDOF
Panasonic / Sony Handheld/Studio Foam Insert will fit any DOF packages fully assembled. Storm Case IM2975 is not included. Actual weight is 3 lbs, but for shipping we use the dimensional weight, which is 17 lbs.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Please note: This foam does not work with the EX3. For the EX3 Foam Click Here!
Our price: $250.00
|
|
|
|
|
|
ENG Deluxe Foam Insert
|
See details
|
|
SKU: Z-FI-HVXENGD
The Zacuto ENG Deluxe Foam Insert holds the following cameras: Sony Z1U, DVX100b, HVX200, HPX 170 and the Sony EX1. This foam also holds two chargers, a Firestore or Cineporter hard drive, three additional batteries, three additional P2 cards, a Marshall monitor, a remote and has a large accessory compartment.
The insert will fit the Storm Case IM-2700. The case is not included in the price. The hard case is available for purchase below.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
The Zacuto ENG Deluxe Foam Insert holds the following cameras: Sony Z1U, DVX100b, HVX200, HPX 170 and the Sony EX1. Please select your camera below.
Our price: $155.00
|
|
|
|
|
|
DSLR Foam Insert
|
See details
|
|
SKU: Z-FI-DSLR
Zacuto's DSLR Foam Insert will fit any DSLR camera with any of our DSLR kits assembled. It fits into a Storm Case IM-2975.
Zacuto's DSLR Foam Insert will fit any DSLR camera with any of our DSLR kits assembled. You can go from the case to the tripod to handheld to the case in seconds. This case also holds additional camera batteries, matte box filters, recording cards, monitor, (2) 90 watt batteries with hotswap, a dual charger for studio batteries and prime lenses. Foam plugs are included so you can fully protect your lenses.
Actual weight is 3 lbs, but for shipping we use the dimensional weight, which is 17 lbs.
Our price: $300.00
|
|
|
|
|
|
Universal Donut
|
See details
|
|
SKU: Z-UD
Zacuto's Universal Donut attaches to the 105mm matte box or Petroff matte box donut (not included), when using the Petroff matte box. It attaches with velcro and stretches to fit to any lens from approximately 40 - 85mm with an expanding elastic opening.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $95.00
|
|
|
|
|
|
Zwing-away adapter
|
See details
|
|
SKU: Z-ZWING1
The Zwing-away adapter is a highly anticipated new product. Zacuto’s Zwing-away adapter is light (only 6.75 oz), inexpensive, and simple to use. Attach the Zwing-away adapter to your already existing 15mm lightweight rods, attach your existing matte box to the Zwing-away adapter rods and now your matte can swing-away. There is no need to throw away your current matte box to achieve the swing-away design, just purchase the Zwing-away adapter!
**Our little Zwing-away is a 2009 Black Diamond Award winner for being one of the best products to debut at this year's NAB show!**
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $395.00
|
|
|
|
|
|
Zgrip Upgrade Kit
|
See details
|
|
SKU: Z-ZUK
The Zgrip Upgrade Kit includes 2 zgrip v3 handles, with allen screws and an allen wrench. This kit is for customers who already own Zacuto Zgrips. The V3 grip design is a larger robust design that rests on the operator's fist to add greater stability.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $65.00
|
|
|
|
|
|
|
|
|
|
