|
#577 |
|
Target Shooter
The Target Shooter is our lightest kit. It has three points of contact by having both hands on the camera and the gunstock in your chest. The entire kit is infinitely adjustable and made with all black rods! You can add a fourth point of contact by adding one of our Z-Finders to the kit.
The Target Shooter is compatible with the new Blackmagic Camera!
See customer reviews here!
Our price: $475.00 |
|
|
Amount: |
|
|
#566 |
|
Z-Finder Pro 3x
The Z-Finder Pro 3x is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 3x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 3x comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3” LCD screens. (A 3.2” version is available.) The diopter allows you to dial in the focus to match your eye.
The 3x magnification is recommended in particular for users who are farsighted and may have problems seeing up close. If you wear strong reading glasses this is the model for you! The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). Users with 20/20 vision can use either magnification. It is a personal preference. Your camera model is irrelevant when choosing between the 2.5x and 3x magnifications. If you are particularly nearsighted and have problems seeing distances or are just looking for a smaller magnification we recommend the Z-Finder Pro 2.5x. Farsighted users can still use the 2.5x model with the addition of the included Extender Frames.
This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. A 3x Z-finder packaged with a 3.2in frame for the MIII and D800 is available here! A la carte 3.2in and 3in Z-finder frames can be found here.
Our price: $395.00 |
|
|
| Gorilla Plate Adapter |
|
|
|
Amount: |
|
|
#564 |
|
Z-Finder Jr.
FLASH SALE!
BIG SAVINGS!!
$100 off regular price!
Was $265 now $165 for a limited time only
The Z-Finder Jr. is Zacuto’s most simple model optical viewfinder. It acts as a stabilizer, cuts out any extraneous light, offers 2.5x magnification, has a 40mm diameter Zacuto optical designed lens, and has multiple mounting options. The Z-Finder Jr. does not have a diopter, instead it uses Z-Finder Extender Frames to adjust the focal point in stages. The Z-Finder Jr's focal point is -4.75 and up (unlimited with extender frames).
The Z-Finder Jr. comes with two mounting options. The first is the silver forked Z-Finder Jr. Mounting Bracket shown in the product photos.* This mounting bracket must be sandwiched between a tripod plate (or similar) and the camera. An included rubber backed snap on frame attaches to the Jr. body and sits up against the camera LCD to avoid scratches or movement. The actual Z-finder Jr. is held in place with pressure from the fork of the bracket. This method is great for people who only shoot video. If you also take photos and will need to come up to the camera viewfinder, you may prefer the second method - our 3” adhesive Z-Finder Mounting Frame.** This method does not require the silver bracket or the rubber backed frame. The Adhesive Frame attaches directly to the camera LCD and the Z-finder can pop on and off that frame. This method will work for all 3” LCD screens.
Click on the photo for more product information!
$100 discount already included. Just select ADD TO CART!
Our price: $165.00 |
|
|
Amount: |
|
|
#796 |
|
Cold Shoe Handle
Zacuto’s Cold Shoe Handle is the perfect way to add a top handle to your run and gun DSLR kit or your DSLR camera. This is a perfect match for our Target Shooter or Striker kits or if you are just shooting with a Z-Finder Pro. The handle is ideal for low-mode shooting and easy transport of your camera. It secures to the camera’s hot shoe with a cold shoe mount. The Cold Shoe Handle mounts to the hot shoe based via Zacuto’s quick release Z-Rail system, allowing you to leave the base on the camera and remove the handle with the flip of a lever. The handle can be slid left or right on the Z-Rail to balance the camera’s center of gravity. Zacuto dovetail accessories are adjustable to work with Z-Rail, NATO, SWAT, RED, PICATINNY, and WOODEN CAMERA rails. The Z-rail is 3” long and can be turned with the cold shoe at 90 degree angles so you can set the handle pointing any direction you like. The handle can connect to the Z-rail backwards or forwards.
The rod running through the handgrip is threaded and can accept rod extensions or a Zacuto Z-release mount like our T-Mount or Tri-Mount to add lightweight accessories such as a microphone or small light.
PLEASE NOTE: We ask that you use caution when using the handle on your camera’s hot shoe. This handle should only be used with lightweight kits like the Target Shooter or Striker. It is not recommended to use the handle with a rig weighing more than 10 lbs. Zacuto is not liable for any broken hot shoes.
Our price: $240.00 |
|
|
Amount: |
|
|
#800 |
|
Blackmagic Top Handle
Blackmagic Camera users can now have the comfort and adjustability of a camera Top Handle. Ideal for carrying and low mode shooting, the Blackmagic Top Handle attaches to the camera with a 5” Z-rail piece. The 5” Z-Rail attaches to the top of the camera via two ¼ 20” screws. The handle attaches to the Z-Rail with a Zacuto quick release ratcheting lever. It can mount facing front or back on the Z-rail and can slide side to side for balance. The 15mm rod running through the handle is threaded to accept rod extensions or any of our Z-release mounts like our T-Mount or Tri-mount to hold accessories.
Zacuto dovetail accessories are adjustable to work with Z-Rail, NATO, SWAT, RED, PICATINNY, and WOODEN CAMERA rails.
Our price: $210.00 |
|
|
Amount: |
|
|
#576 |
|
Striker
The Striker is light and easy to handle. It has three points of contact by having one hand on the handgrip, the gunstock in your chest and your focusing hand on the lens. The entire kit is infinitely adjustable and now made with all black rods! You can add a fourth point of contact by adding one of our Z-Finders to the kit.
The Zacuto Gorilla plate attaches to the bottom of your camera using the standard tripod screw hole. The Gorilla plate has a 15mm hole in the bottom which allows you to attach the main rod for the Striker rig. The rig can be freed from the Gorilla plate by flipping the red lever. A tripod plate can be installed on the Gorilla plate for quickly moving from handheld to tripod.
See customer reviews here!
Our price: $855.00 |
|
|
Amount: |
|
|
#574 |
|
Cross Fire
The Cross Fire is a unique kit as it is the Single Action kit and Striker kit combined. It comes with all block rods. The Cross Fire uses the expandable DSLR baseplate so this kit can easily be upgraded from a simple point of contact kit like the Striker Kit to a full shoulder mounted system like the Fast Draw. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height.
The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) ¼ 20” and (1) 3/8 16”. Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro, DSLR optical viewfinder, by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.
See customer reviews here!
Our price: $2,256.25 |
|
|
Amount: |
|
|
#565 |
|
Z-Finder Pro 2.5x
The Z-Finder Pro 2.5x is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 2.5x comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3” LCD screens. (A 3.2” version is available.) The diopter allows you to dial in the focus to match your eye.
The 2.5x magnification is recommended in particular for users who are near sighted and may have problems seeing long distances. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). Users with 20/20 vision can use either magnification. It is a personal preference. This is the model we use with our electronic viewfinder packages. Your camera model is irrelevant when choosing between the 2.5x and 3x magnifications. If you are particularly far sighted (wear strong reading glasses) or are just looking for the biggest magnification possible we recommend the Z-Finder Pro 3x.
This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. A 2.5x Z-finder packaged with a 3.2in frame for the MIII and D800 is available here! A la carte 3.2in and 3in Z-finder frames can be found here.
Our price: $395.00 |
|
|
| Gorilla Plate Adapter |
|
|
|
Amount: |
|
|
#571 |
|
Z-Finder Storage Case
The Z-Finder Storage Case is compatible with all Z-Finder models. It is a black bag with an embroidered Zacuto logo. It closes using Velcro. It can also attach to a belt to wear around your waist. This bag is sure to keep your Z-Finder clean and safe in your camera bags. The dimensions are: 8x5x4 inches.
Our price: $23.00 |
|
|
Amount: |
|
|
#584 |
|
From Still to Motion: A Photographer's guide to creating video with your DSLR
From Still to Motion is a all around guide to shooting video with your DSLR. Professional photographers are evolving and adding video to their list of offerings to clients. Driving the evolution is the need for competitive advantage and creative exploration. With the addition of high definition video capabilities to the latest batch of DSLR cameras, photographers have a convenient and familiar tool to fully embrace the new world of video. But video is very different than photography, with new challenges and technology to master.
Our price: $42.00 |
|
|
Amount: |
|
|
#569 |
|
Z-Finder 3" Mounting Frame for Small DSLR Bodies with Battery Grips
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.
Please Note: This frame DOES NOT WORK with 3rd party battery grips.
Our price: $120.00 |
|
|
Amount: |
|
|
#570 |
|
Z-Finder 3" Mounting Frame for Tall DSLR Bodies
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV and Nikon D3s with 3" screens.
This frame is not compatible with the D4 or 1DX or any tall camera with a 3.2in LCD screen. You can find the correct frame for those cameras here.
Our price: $95.00 |
|
|
Amount: |
|
|
#568 |
|
Z-Finder 3" Mounting Frame for Small DSLR Bodies
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with 3" screens and no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D Canon 60D, Nikon D90, Nikon D300, D7000 and other cameras of the same size.
This frame is not compatible with the D800 or 5D Mark III. A frame for the MIII and D800 is available here!
Our price: $50.00 |
|
|
Amount: |
|
|
#614 |
|
Jumper
The Jumper is an accessory for customers who already own Zacuto’s DSLR Baseplate, or a kit that contains the DSLR baseplate, and would like to have Gorilla Kit run n gun capabilities. The Jumper attaches to the wedge on the top quick-releasable portion of the DSLR Baseplate. You can then mount a vertical rod via the Jumper’s 15mm hole to create a kit like the Target Shooter or Striker.
Our price: $65.00 |
|
|
Amount: |
|
|
#666 |
|
EVF Gorilla Plate Bracket
The EVF Gorilla Plate Bracket is used to mount the EVF onto any of the Zacuto Gorilla Kits that use a Gorilla Plate. It can also be used to mount the EVF onto the DSLR Baseplate. The EVF Gorilla Plate Bracket includes a "sling" bracket which mounts to the Gorilla Plate or DSLR Baseplate using the two allen screws that also attach the red thumb screw block to the plates. (If you are familiar with mounting the Z-Finder Frame on the Gorilla Plate or DSLR Baseplate, the sling bracket is mounted the same way). At the end of the sling bracket is a Z-Mount Zwivel which allows you to attach the EVF Pan and Tilt Mount (included). The Z-Mount Zwivel gives you the ability to position the EVF in a few different ways. Attached to the EVF Pan and Tilt Mount is the ZicroMini. The ZicroMini then attaches to the bottom of EVF with its 1/4" 20 screw. This allows you to quickly release your EVF frmo the mount with the flip of a lever.
Also, if you are looking to use the Zacuto Pincher (Universal mini hdmi cable restraint relief - shown in detailed pictures), it will mount onto this bracket.
If you are looking to mount the EVF to another manufacturer's rig or standard 15mm rod, check out the EVF Rod Mount.
Note: Must have Gorilla Plate or DSLR Baseplate for this bracket to work.
Our price: $240.00 |
|
|
Amount: |
|
|
|
