Stinger

#653

Stinger

Our Stinger rig is our solution to DSLR shoulder mounted shooting with an EVF or small on-board monitor. The Stinger includes all black rods. This rig uses our height adjustable DSLR Baseplate to mount to any DSLR and tripod. The baseplate attaches to your tripod using the standard tripod plate screws; (2) 1/4 20" and (1) 3/8 16". You can also easily quick release your camera from the rig by turning the red knob on the baseplate and pulling up on your camera. This cool feature allows you to quickly switch between using the camera on its own or as part of your rig.

This system includes our shoulder pad and Z-Lite 7 lb counterbalance weight for a fully balanced in-line rig. The more balanced the rig, the less front heaviness and arm fatigue. You can slide the counterbalance weight forward and backward on the rods for custom comfort. This rig can be used on your left or right shoulder. With the shoulder pad and counterbalance weight coming directly off of the back of the baseplate, the rig is perfectly in-line and ready to be used with one of our EVFs or an on-board monitor for traditional ENG style shooting. You can mount your EVF or monitor to the side of the rig using our EVF Standard Mount Kit or EVF Tri Mount Kit. These kits attach to the side of the DSLR Baseplate included with the Stinger and allow you to have your eye positioned comfortably in front of the EVF or monitor.

This rig also includes our Z-Focus and ZipGear Universal. This kit is compatible with any 15mm lightweight accessories.

Our price: $2,992.50

#629

Z-Finder EVF Pro

The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.

The Z-Finder EVF Pro is a complete EVF with diopter. It includes the EVF Flip model and an optical viewfinder which will snap onto the frame of the monitor and can flip up 180 degrees. The optical viewfinder contains high quality 2.5x optics with anti-fog shields and a diopter. The anti-fog is extremely important for reducing fog. It will also include extender frames. The here for the special!

See more info and pics here!

See customer reviews here!

Our price: $1,000.00

#627

EVF Flip

The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.

The EVF Flip has a Z-Finder frame built into the unit that can be flipped open to 180 degrees. You can also pop off the Z-Finder and use the EVF as a monitor similar to the EVF Snap. You can use the Z-Finder Pro or Jr. on this model as well. This is essential when working handheld with a producer or director so that you can show them the shot without having to have them get their eye in the viewfinder. You just flip up and they can see the shot!

See more info and pics here!

See customer reviews here!

Our price: $775.00

#640

EVF Standard Mount

The EVF Standard Mount is used to mount the EVF onto the Zacuto DSLR Baseplate. It includes a 4.5” F/F rod that attaches to 15mm rod hole on the side of the DSLR Baseplate and a Z-Mount Zwivel. The Z-Mount Zwivel is a 15mm to 15mm rod connector that allows you to attach a vertical rod or the included EVF pan and tilt mount to the horizontal rod coming out of the side of the DSLR Baseplate. Attached to the vertical EVF pan and tilt mount is Zacuto’s Zicro Mini. This allows you quickly release the EVF from the EVF Standard Mount with the flip of the lever. The pan and tilt allows you to adjust the angle of your EVF to the desired position.

If you are looking to mount the EVF to another manufacturer’s rig check out the EVF Rod Mount.

Check out more info on all of our EVF Mounts here.

Our price: $265.00

#639

EVF Tri Mount Kit

The EVF Tri-Mount Kit gives the option to mount the EVF in 3 different ways. It gives you the option to use the EVF Standard Mount when shooting handheld (off the side of the Zacuto DSLR Baseplate), the Extender Viewfinder Mount when shooting on a tripod or dolly, or in quick release hotshoe mount configuration (see detailed images).

The Tri-Mount includes the EVF Standard Mount as well as a 7” M/F rod and a ZUD ¼” 20. The 7” M/F rod allows you to use the EVF in an extender viewfinder position. To use the extender viewfinder mount, remove the EVF Mount from the Z-Mount Zwivel, then screw the 7” M/F rod into the EVF Mount and then slide the Z-mount Zwivel wherever you like so that you can position your EVF to your desired position.

The included ZUD ¼” 20 allows you to free the camera and EVF from your rig and mount it quickly to the hot shoe mount of your camera. In order to use the quick release hot shoe mount effectively, the hot shoe mount included with the EVF should be mounted on your camera’s hot shoe adapter. Then screw the ZUD ¼” 20 into the hot shoe mount and leave that on your camera’s hot shoe adapter. You can then quickly release or attach the EVF from either the Standard Mount or Extender Viewfinder mount with a flip of the lever. This is essential for releasing your camera as well as your EVF from your rig in a matter of seconds.

Check out more info on all of our EVF Mounts here.

Our price: $340.00

#588

Double Barrel Kickstand

The Double Barrel kickstand is recommended for the DSLR Double Barrel Kit. It gives the rig a more stable footing when rested on the ground or flat surface, especially when the camera is loaded with many accessories such as follow focuses and matte boxes. It is all black.

Our price: $65.00

#523

Zound Hotshoe

The Zound Hotshoe is a quick release zacuto mount used to mount any device with a ¼ 20” (or 3/8 16”with ¼ 20” to 3/8 16” adapter) screw hole to the camera’s hotshoe. This kit is particularly designed to mount a sound device off the camera’s hotshoe but it can be used for other devices as well.

Our price: $183.35

#516

H4n Handy Recorder

$30 MAIL-IN REBATE! VALID 4/1/2012 through 6/30/2012

Click here for mail-in rebate form.

The Zoom H4n is a sophisticated portable handheld recorder with new features and improved user experience at every level. Among its many features, Zoom’s H4n offers superior, built-in X/Y stereo condenser mics that allow variable recording patterns at either 90° or 120°. Higher quality audio capture through its new, digitally controlled, high-quality mic preamp, the ability to use internal and external mics simultaneously for 4 channel recording, a large LCD screen,more intuitive interface and onboard reference speaker will take the user’s recording experience to the next level.

The Zoom H4n portable recorder also incorporated features such as Broadcast Wave Format (BWF) compatible time stamp and track marker functions and its auto-record and pre-record features so you never miss a moment. Of course, the H4n records high resolution audio at 24bit/96kHz on SD/SDHC media of up to 32GB and is USB 2.0. The H4n is a robust recorder with a rubberized, shock resistant body for improved chassis protection, all-metal microphone design and a built-in mounting joint for tripod and mic stand use.

Our price: $325.00

#740

Z-Focus Extender

The Z-Focus Extender is used to extend the distance between the focus knob and gear housing on any Zacuto Z-Focus. Moving the focus knob away from the rods is essential for compact rig setups with multiple accessories. The Z-Focus Extender is 4.5" long. The added distance provides clearance between an EVF and focus knob, making it much easier for the focus puller or camera operator to control the knob and see focus marks. This accessory can potentially shorten your overall rig length by three inches, moving the rig center of gravity closer to the user’s shoulder. Installation is easy. Check out detailed product page for instructional video.

If you are using a Z-Focus that was purchased before January of 2010 or your Z-Focus gear has a hole in the middle instead of a metal pin, please call as you will need a different screw to mount the extender properly.

Our price: $95.00

#758

FC1 USB Focus Controller

The FC1 USB Focus Controller gives the photo and video enthusiast a compact yet powerful device that enhances the capabilities of HD video enabled Canon EOS Digital SLR cameras. Like Canon's EOS Utility, the FC1 uses Canon's USB protocol to allow control of a wide range of functions, but without the limitations and bulk of being tethered to a computer. The device is handheld, weighing under 5 oz. including batteries, and less than 3" in diameter. It is connected to your camera with a standard mini-B to A USB cable, and can be used as a remote control or attached to a rig using a 1/4"-20 mount located on the back of the anodized aluminum enclosure.

The FC1 uses the autofocus motor in lenses to control focus, even while recording video. This also works in any Live View modes, which can be useful for photography. The HDMI output can still be used in tandem with the controller, as well. The nine other switches located around the central focus knob can be used to access important camera functions, such as video start/stop, digital zoom, saving focus points, and adjusting camera settings. If your intended use is as a remote control for a camera mounted on a crane or jib, the FC1 has been successfully tested with non-powered USB extension cables past 25 meters in length.

It is important that potential users understand how Canon's USB implementation affects the FC1. Certain characteristics of Canon's design make it perform quite differently than a mechanical follow focus, so it is recommended that you read the User Guide and the Canon USB Protocol article.

Included is a 30 day money back guarantee, which ensures that you can fully test out the FC1 with the type of film or photography work you do, along with all of your cameras and lenses.

Camera Compatibility
•Canon EOS 1D Mark IV, 5D Mark II & III, 1DX, 7D, 60D, 600D, 550D, and 500D.

Our price: $400.00

#759

MC1 USB Mini Controller

The Okii MC1 is a wired USB remote, designed for Canon EOS Digital SLR cameras with video capability. Similar to the EOS Utility on a computer, the MC1 uses Canon's USB protocol to allow control of a wide range of abilities, but without the limitations and bulk of being tethered to a computer. When mounted near a rig handle, it provides easy access to camera functions such as video start/stop, digital zoom, and settings changes. The MC1 can also be used at longer distances (e.g., on a crane or boom) with non-powered USB extension cables. An optional automatic recording restart feature is included, which can stop and restart video recording at 11-minute intervals for long film sequences, or can act as a fail safe.

The MC1 is approximately 3" x 1.5" x .75" and weighs about 3 ounces. It connects to your camera with a standard mini-B to A USB cable (the same cable you use to connect your camera to a computer). Three 1/4"-20 mounting points on the top and sides are provided to secure the MC1 to a rig or handle, as shown below using a Function Micro Clamp:

Our price: $250.00