|
|
|
Gorilla Baseplate for Canon C100-C300-C500, Scarlet and Epic Cameras
|
See details
|
|
SKU: Z-CGB
The Gorilla Baseplate for the Canon C100/300/500, Scarlet and Epic Cameras is a simpler, lighter version of our Studio Baseplate. It attaches to the camera with 3/8” 16 and ¼” 20 screws. The Gorilla Baseplate features 15mm diameter, 60mm spaced threaded rod holes in the front of the base plate that allow users to mount a follow focus, lens support or other accessories in front of the camera. The Gorilla Baseplate is not compatible for matte box use unless you have a height adjustable matte box.
The Gorilla Baseplate also features our rod port system on the side of the plate which allows you to mount an EVF
or other accessories from the side. The Gorilla Baseplate is great for building simple run’n’gun type set ups like the Target Shooter, Striker, and Recoil. It can also be used for a simple tripod set-up. The Gorilla Baseplate does not come with rods. Rods can be purchased separately.
Our price: $165.00
|
|
|
|
|
|
Studio Baseplate for Scarlet and Epic Cameras
|
See details
|
|
SKU: Z-ESSB
The Studio Baseplate for Scarlet and Epic Cameras combines our C300 Studio Baseplate and the Rod Riser for Scarlet and Epic Cameras in one easy package. (NOTE: This baseplate comes only with rods shown.) The Studio Baseplate is lightweight, sturdy and easily adaptable. Rods can be attached to the back of the plate to hold a shoulder pad, batteries, and other accessories. Rods can also be attached to the side of the plate, via rod ports, and secured with Allens. The riser is attached via two Allen screws and is easily removed if you plan to use this with a Canon C300 as well. The riser gives you the correct rod height to add a follow focus and matte box to your kit. The Studio Baseplate for Scarlet and Epic Cameras comes with two 4.5” female/female front quick releasable rods.
Our price: $465.00
|
|
|
|
|
|
Rod Riser for Scarlet and Epic Cameras
|
See details
|
|
SKU: Z-ESRR
The Rod Riser for Scarlet and Epic Cameras is for use with our C300 Studio Baseplate. It attaches to the front of the C300 Studio Baseplate via two Allen screws. This riser allows you to use our Studio Baseplate with a Scarlet or Epic and add a follow focus and matte box. The Studio Baseplate is a flat, light platform with rods running through the plate, plus a rod port on each side. It is an easily adaptable, elegant solution for the C300 and now the Scarlet and Epic too! The Rod Riser for Scarlet and Epic Cameras comes with two 4.5” female/female front quick releasable rods.
Our price: $65.00
|
|
|
|
|
|
Target Shooter for Canon C100-C300-C500
|
See details
|
|
SKU: Z-CTS
This Target Shooter kit is our most basic rig designed for the following cameras: Canon C100/300/500, RED Scarlet and Epic, and the Sony FS100 and FS700. It is designed for lightweight run’n’gun shooting stabilization. The Target Shooter features our Gorilla Baseplate which attaches to your camera using 3/8” 16 and ¼” 20 screws. The Gorilla Baseplate also features a set of 15mm lightweight threaded holes in the front of the baseplate for use with Zacuto rods. This gives the added benefit of allowing users to mount a follow focus, lens support or other accessories in front of the camera. The rod to lens height is not standard and requires a height adjustable matte box*.
The Gorilla Baseplate has a 15mm hole in the bottom in order to attach the main vertical rod for the Target Shooter Gunstock. The rig can be freed from the Gorilla Baseplate by flipping the red lever on the side of the plate. A tripod plate can be installed under the Gorilla Baseplate for quickly moving from handheld to tripod. The Target Shooter features the Zacuto Gunstock. To use, simply brace the Gunstock against your shoulder to stabilize your shot. This kit has minimal set up time and is very light and simple. This rig works best when using the eyepiece on your camera.
Our price: $525.00
|
|
|
|
|
|
Striker For Canon C100-C300-C500
|
See details
|
|
SKU: Z-CSR
The Striker for the Canon C100/300/500 is a step up from the Target Shooter. It is designed for lightweight, run’n’gun shooting stabilization. It is super light and easy to handle. The Striker rig features the Gorilla Baseplate which attaches to your camera using 3/8” 16 and ¼” 20 screws. This kit is for the Canon C300/100/500 and RED Scarlet and Epic cameras. The Gorilla Baseplate also features a set of 15mm lightweight threaded holes in the front of the baseplate. This allows users to mount a follow focus, lens support or other accessories in front of the camera. The rod to lens height is not standard, so it is not compatible with a matte box unless you have a height adjustable matte box.
Our price: $975.00
|
|
|
|
|
|
Stinger for Scarlet and Epic Cameras
|
See details
|
|
SKU: Z-SES
The Stinger for Scarlet and Epic Cameras is a fully balanced shoulder mounted rig perfect for those long shooting days. The rig features our Studio Baseplate for Scarlet and Epic Cameras. This baseplate features our Rod Riser with 4.5” rods. The Rod Riser provides the correct rod height when using a matte box or follow focus with the Scarlet and Epic. Rods also run out of the back of the plate to hold the shoulder pad and counterbalance weights or batteries mounted on our Zwiss Plate for counter weight. On each side of the baseplate there is also a set of 15mm lightweight holes. The side rod ports holes take 15mm female rods that are locked via an Allen screw. This gives users virtually unlimited mounting options such as mounting a Zwiss Plate with professional batteries off of the side when shooting on a tripod for better balance, creating a cage configuration, or mounting Zacuto articulating arms, an EVF Mount, rods and more. The baseplate has standard ¼” 20 and 3/8” 16 holes on the bottom for mounting the rig onto a tripod.
RED, RED ONE, Epic-M and Scarlet-X trademarks owned by RED Digital Cinema. Zacuto is not affiliated with RED Digital Cinema.
Our price: $1,660.00
|
|
|
|
|
|
Recoil for Canon C100-C300-C500, Scarlet and Epic Cameras
|
See details
|
|
SKU: Z-CRL
The Recoil is the ultimate balanced rig for the C300/100/500, Scarlet and Epic Cameras. In the Recoil concept, the camera sits directly on your shoulder like a typical ENG camera. The Recoil is super light and stripped down (if you are looking for something even more stripped down, check out the Recoil Lite). The Recoil starts with our Studio Baseplate. It attaches to the camera with 3/8” 16 and ¼” 20 screws*. There are 12” lightweight spaced 15mm threaded rods running through the Studio Baseplate. These can be extended to hold additional accessories at the front or back of the kit. The can slide back and forth through the plate to accommodate different lens lengths by loosening the two levers on the side of the plate. The Studio Baseplate also features lightweight spaced rod holes on either side of the plate. They accept a female rod end (or Zacuto Zamerican Articulating Arm
) and tighten with an Allen. When sitting on a tripod, you can mount a Zwiss Plate from the rod ports on the side of the baseplate (via two short female/female rods, not included) for better balance.
Unique to the Recoil is the use of the Zacuto Q-Release and Shoulder Pad. The Q-release allows you to mount the shoulder pad directly underneath the camera and be able to quickly release the shoulder pad from the rig by flipping two levers. This gives you two things: the ability to quickly attach the rig to a tripod and vice versa, and the ability to have the camera sit directly on your shoulder eliminating the front heaviness. C...
Our price: $1,375.00
|
|
|
|
|
|
Recoil Lite for Canon C100-C300-C500, Scarlet and Epic Cameras
|
See details
|
|
SKU: Z-CRLLT
The Recoil Lite is a stripped down version of our larger, standard Recoil kit. The Recoil Lite is compatible with the Canon C300/100/500, RED Scarlet and Epic cameras. In this Recoil concept, the camera sits directly on your shoulder like a typical ENG Camera. The Recoil Lite starts with our Gorilla Baseplate, which attaches to the camera with 3/8” 16 and ¼” 20 screws. The Gorilla Baseplate features 15mm diameter, 60mm spaced threaded rod holes in the front of the plate that allow users to mount a follow focus, lens support or other accessories in front of the camera. The Gorilla Baseplate is not compatible for matte box use unless you have a height adjustable matte box.
Unique to the Recoil Lite (and Recoil) is the use of the Zacuto Q-Release in mounting our Shoulder Pad. The Q-release allows you to mount the shoulder pad directly underneath the camera and then quick release the shoulder pad from the rig by flipping the two levers on the side. This gives you two things; the ability to quickly attach the rig to a tripod and vice versa, and the ability to have the camera sit directly on your shoulder eliminating the front heaviness.
The Recoil Lite requires the use of an EVF or other external monitor. We recommend using the Z-Finder EVF Pro and the EVF Rod Mount to mount the EVF to the Recoil Lite. With the Recoil Lite, the operator can hold onto the 15mm rods coming off the front of the Gorilla Baseplate for balance. If you prefer lower handgrips - check out the full Recoil. ...
Our price: $560.00
|
|
|
|
|
|
Z-Rail Z-Lock
|
See details
|
|
SKU: Z-ZRZL
The Z-rail Z-lock attaches to the top of your camera or camera handle with two ¼” 20 screws (Included). It is compatible with Epic/Scarlet, Sony F3, Black Magic camera, Panasonic AF100 and others. The Z-rail section has a ¼” 20 screw mount in the center for a Noga arm or other accessories. The Z-lock section attaches to the Z-rail portion with a screw. It can rotate 90 degrees for accessory placement. The Z-lock can accept a female 15mm rod or Zacuto articulating arm. It is ideal for mounting an EVF off of the top handle of a F3 or AF100 where rod space under the lens is limited. Check out the EVF Top Mount
Our price: $80.00
|
|
|
|
|
|
V-Mount Plate with 10" 1B Lemo for Scarlet/Epic
|
See details
|
|
SKU: GP-S-EPIC10
This is a V-Mount Plate with a P-tap output and 10" 1B 6-pin Lemo Connection. This plate transmits data to the Epic and Scarlet cameras when used with RED brick batteries or designated Switronix RED Brick Batteries. It mounts directly to the RED Cradle or RED Quickplate or the Zacuto Zwiss Plate.
Our price: $299.95
|
|
|
|
|
|
Anton Bauer 3-Stud Battery Plate for Scarlet/Epic
|
See details
|
|
SKU: QRC-EPIC
Anton Bauer 3-Stud Battery Plate for the Scarlet and Epic cameras. It features 3 solid mechanical connections and self-cleaning, gold plated communication pins. It comes with an auxiliary PowerTap connector, power cable and 6p LEMO power connector. The PowerTap connector allows a camera mounted p-tap device to be powered from the camera battery and is internally fused for safety. Provides uninterrupted power to your Scarlet or Epic.
This can attach to Zacuto's Zwiss Plate alone or for a horizontal mount, the Red Plate mounted underneath the Doublemount.
Our price: $398.95
|
|
|
|
|
|
|
|
|
|
|
|
