EVF Standard Mount

Zacuto Home

Mailing List

Home

Cart

CALL Toll-Free: 888.294.FILM (3456) | In Chicago: 312.863.FILM (3456)

Zacuto :: EVF Products :: EVF Standard Mount

Printable version

Shop By

Shop By Manufacturer

Anton Bauer
Blue Crane
Formatt Filters
F-Stop
Genus
Hot Rod Camera
Ikan
Litepanels
Marshall
Manfrotto
NanoFilm
Novoflex
Okii
Peachpit
Petroff
Storm
Switronix
Zoom

EVF Standard Mount #Z-ESM

View More Images

The EVF Standard Mount is used to mount the EVF onto the Zacuto DSLR Baseplate. It includes a 4.5” F/F rod that attaches to 15mm rod hole on the side of the DSLR Baseplate and a Z-Mount Zwivel. The Z-Mount Zwivel is a 15mm to 15mm rod connector that allows you to attach a vertical rod or the included EVF pan and tilt mount to the horizontal rod coming out of the side of the DSLR Baseplate. Attached to the vertical EVF pan and tilt mount is Zacuto’s Zicro Mini. This allows you quickly release the EVF from the EVF Standard Mount with the flip of the lever. The pan and tilt allows you to adjust the angle of your EVF to the desired position.

If you are looking to mount the EVF to another manufacturer’s rig check out the EVF Rod Mount.

Check out more info on all of our EVF Mounts here.

Details

Weight	0.40 lbs
Price:	$265.00

Options

Quantity

Add to cart

Add to wish list (Login Required)

Related products

#640

EVF Standard Mount

The EVF Standard Mount is used to mount the EVF onto the Zacuto DSLR Baseplate. It includes a 4.5” F/F rod that attaches to 15mm rod hole on the side of the DSLR Baseplate and a Z-Mount Zwivel. The Z-Mount Zwivel is a 15mm to 15mm rod connector that allows you to attach a vertical rod or the included EVF pan and tilt mount to the horizontal rod coming out of the side of the DSLR Baseplate. Attached to the vertical EVF pan and tilt mount is Zacuto’s Zicro Mini. This allows you quickly release the EVF from the EVF Standard Mount with the flip of the lever. The pan and tilt allows you to adjust the angle of your EVF to the desired position.

If you are looking to mount the EVF to another manufacturer’s rig check out the EVF Rod Mount.

Check out more info on all of our EVF Mounts here.

Our price: $265.00

Amount:

#626

EVF Snap

The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.

The EVF snap is our standard EVF that has the Zacuto Z-Finder Frame built into the unit. The Z-Finder Pro or Jr. snap on and off of the monitor. You can use the EVF as a small on-board monitor or as an EVF alone.

See more info and pics here!

See customer reviews here!

Our price: $675.00

Amount:

#627

EVF Flip

The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.

The EVF Flip has a Z-Finder frame built into the unit that can be flipped open to 180 degrees. You can also pop off the Z-Finder and use the EVF as a monitor similar to the EVF Snap. You can use the Z-Finder Pro or Jr. on this model as well. This is essential when working handheld with a producer or director so that you can show them the shot without having to have them get their eye in the viewfinder. You just flip up and they can see the shot!

See more info and pics here!

See customer reviews here!

Our price: $775.00

Amount:

#628

Z-Finder EVF

The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.

The Z-Finder EVF is a complete EVF. It includes the EVF Snap model and an optical viewfinder which snaps onto the frame on the monitor. The optical viewfinder contains high quality 2.5x optics with anti-fog shields. The anti-fog is extremely important for reducing fog. It does not have a diopter but will include the Zacuto Z-Finder Extender Frames. The Extender Frames will get the focus close but might not be exact as you can’t dial it in with a diopter like you can with our Z-Finder Pro models.

See more info and pics here!

See customer reviews here!

Our price: $805.00

Amount:

#629

Z-Finder EVF Pro

The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.

The Z-Finder EVF Pro is a complete EVF with diopter. It includes the EVF Flip model and an optical viewfinder which will snap onto the frame of the monitor and can flip up 180 degrees. The optical viewfinder contains high quality 2.5x optics with anti-fog shields and a diopter. The anti-fog is extremely important for reducing fog. It will also include extender frames. The here for the special!

See more info and pics here!

See customer reviews here!

Our price: $1,000.00

Amount:

#639

EVF Tri Mount Kit

The EVF Tri-Mount Kit gives the option to mount the EVF in 3 different ways. It gives you the option to use the EVF Standard Mount when shooting handheld (off the side of the Zacuto DSLR Baseplate), the Extender Viewfinder Mount when shooting on a tripod or dolly, or in quick release hotshoe mount configuration (see detailed images).

The Tri-Mount includes the EVF Standard Mount as well as a 7” M/F rod and a ZUD ¼” 20. The 7” M/F rod allows you to use the EVF in an extender viewfinder position. To use the extender viewfinder mount, remove the EVF Mount from the Z-Mount Zwivel, then screw the 7” M/F rod into the EVF Mount and then slide the Z-mount Zwivel wherever you like so that you can position your EVF to your desired position.

The included ZUD ¼” 20 allows you to free the camera and EVF from your rig and mount it quickly to the hot shoe mount of your camera. In order to use the quick release hot shoe mount effectively, the hot shoe mount included with the EVF should be mounted on your camera’s hot shoe adapter. Then screw the ZUD ¼” 20 into the hot shoe mount and leave that on your camera’s hot shoe adapter. You can then quickly release or attach the EVF from either the Standard Mount or Extender Viewfinder mount with a flip of the lever. This is essential for releasing your camera as well as your EVF from your rig in a matter of seconds.

Check out more info on all of our EVF Mounts here.

Our price: $340.00

Amount:

#641

EVF Rod Mount

The EVF Rod Mount attaches your Zacuto EVF to any 15mm rod. This is perfect if you want to connect your EVF Mount to another manufacturer’s rig or to a Zacuto Universal Baseplate when using a video camera such as the AF-100, Sony F3, or FS100. The combination of our Z-mount Zwivel 360 degree connector at the corner and our tilt and pan mount at the top give you unlimited options for placing your EVF. The Zicro Mini allows you to quickly release your EVF from the EVF Rod mount with a flip of the lever. The horizontal and vertical rod ends are threaded female so rod extensions can be used for both distance and height. This truly is a versatile mount enabling the user to place their EVF exactly where it needs to be.

Check out more info on all of our EVF Mounts here.

Our price: $340.00

Amount:

#637

Hotshoe Ball Mount

Omni-directional hotshoe ball mount is perfect for mounting a Zacuto EVF to a camera hotshoe. Quick locking mechanism keeps ball mount firmly in place. One flip of the lever releases the ball to get the perfect angle for your shot. Comes with a standard ¼ 20 male screw on top. Can be mounted on any accessory with corresponding ¼ 20 female screw hole.

Note: One hotshoe ball mount comes standard with all Zacuto EVF packages.

Our price: $48.00

Amount:

#653

Stinger

Our Stinger rig is our solution to DSLR shoulder mounted shooting with an EVF or small on-board monitor. The Stinger includes all black rods. This rig uses our height adjustable DSLR Baseplate to mount to any DSLR and tripod. The baseplate attaches to your tripod using the standard tripod plate screws; (2) 1/4 20" and (1) 3/8 16". You can also easily quick release your camera from the rig by turning the red knob on the baseplate and pulling up on your camera. This cool feature allows you to quickly switch between using the camera on its own or as part of your rig.

This system includes our shoulder pad and Z-Lite 7 lb counterbalance weight for a fully balanced in-line rig. The more balanced the rig, the less front heaviness and arm fatigue. You can slide the counterbalance weight forward and backward on the rods for custom comfort. This rig can be used on your left or right shoulder. With the shoulder pad and counterbalance weight coming directly off of the back of the baseplate, the rig is perfectly in-line and ready to be used with one of our EVFs or an on-board monitor for traditional ENG style shooting. You can mount your EVF or monitor to the side of the rig using our EVF Standard Mount Kit or EVF Tri Mount Kit. These kits attach to the side of the DSLR Baseplate included with the Stinger and allow you to have your eye positioned comfortably in front of the EVF or monitor.

This rig also includes our Z-Focus and ZipGear Universal. This kit is compatible with any 15mm lightweight accessories.

Our price: $2,992.50

Amount:

Add Checked Items to Cart