EVF Gorilla Plate Bracket

Zacuto Home

Mailing List

Home

Cart

CALL Toll-Free: 888.294.FILM (3456) | In Chicago: 312.863.FILM (3456)

Zacuto :: EVF Products :: EVF Gorilla Plate Bracket

Printable version

Shop By

Shop By Manufacturer

Anton Bauer
Blue Crane
Formatt Filters
F-Stop
Genus
Hot Rod Camera
Ikan
Litepanels
Marshall
Manfrotto
NanoFilm
Novoflex
Okii
Peachpit
Petroff
Storm
Switronix
Zoom

EVF Gorilla Plate Bracket #Z-EGPB

View More Images

The EVF Gorilla Plate Bracket is used to mount the EVF onto any of the Zacuto Gorilla Kits that use a Gorilla Plate. It can also be used to mount the EVF onto the DSLR Baseplate. The EVF Gorilla Plate Bracket includes a "sling" bracket which mounts to the Gorilla Plate or DSLR Baseplate using the two allen screws that also attach the red thumb screw block to the plates. (If you are familiar with mounting the Z-Finder Frame on the Gorilla Plate or DSLR Baseplate, the sling bracket is mounted the same way). At the end of the sling bracket is a Z-Mount Zwivel which allows you to attach the EVF Pan and Tilt Mount (included). The Z-Mount Zwivel gives you the ability to position the EVF in a few different ways. Attached to the EVF Pan and Tilt Mount is the ZicroMini. The ZicroMini then attaches to the bottom of the EVF with its 1/4" 20 screw. This allows you to quickly release your EVF from the mount with the flip of a lever.

Also, if you are looking to use the Zacuto Pincher (Universal mini hdmi cable restraint relief - shown in detailed pictures), it will mount onto this bracket.

If you are looking to mount the EVF to another manufacturer's rig or standard 15mm rod, check out the EVF Rod Mount.

Note: Must have Gorilla Plate or DSLR Baseplate for this bracket to work.

Details

Weight	0.40 lbs
Price:	$240.00

Options

Quantity

Add to cart

Add to wish list (Login Required)

Related products

#666

EVF Gorilla Plate Bracket

The EVF Gorilla Plate Bracket is used to mount the EVF onto any of the Zacuto Gorilla Kits that use a Gorilla Plate. It can also be used to mount the EVF onto the DSLR Baseplate. The EVF Gorilla Plate Bracket includes a "sling" bracket which mounts to the Gorilla Plate or DSLR Baseplate using the two allen screws that also attach the red thumb screw block to the plates. (If you are familiar with mounting the Z-Finder Frame on the Gorilla Plate or DSLR Baseplate, the sling bracket is mounted the same way). At the end of the sling bracket is a Z-Mount Zwivel which allows you to attach the EVF Pan and Tilt Mount (included). The Z-Mount Zwivel gives you the ability to position the EVF in a few different ways. Attached to the EVF Pan and Tilt Mount is the ZicroMini. The ZicroMini then attaches to the bottom of EVF with its 1/4" 20 screw. This allows you to quickly release your EVF frmo the mount with the flip of a lever.

Also, if you are looking to use the Zacuto Pincher (Universal mini hdmi cable restraint relief - shown in detailed pictures), it will mount onto this bracket.

If you are looking to mount the EVF to another manufacturer's rig or standard 15mm rod, check out the EVF Rod Mount.

Note: Must have Gorilla Plate or DSLR Baseplate for this bracket to work.

Our price: $240.00

Amount:

#567

Gorilla Plate

The Gorilla Plate is used in both of our Gorilla Kits (Striker and Target Shooter) and must be used with the Z-Finder Pro. The Z-Finder V2 will also work with this plate! You must also purchase a frame to mount your V2 onto the Gorilla Plate. The Gorilla plate attaches to your camera using the standard tripod screw hole. You can also mount your tripod plate underneath the Gorilla plate so you can quickly go from handheld to tripod use. For mounting the Gorilla plate to the tripod, it has (2) ¼ 20” screw holes and a locking pin hole. The Z-Finder frame attaches to the Gorilla plate using two thumb screws. The thumb screws and slider are not included with the Gorilla Plate; they are included with the Z-Finder Frames. The frame can be removed by loosening the thumb screws and pulling up on the frame.

Our price: $69.00

Gorilla Plate Adapter:

Amount:

#572

DSLR Baseplate

Your Zacuto DSLR Base Plate is a highly configurable base plate which is adjustable to accommodate tall and short body cameras and cameras with battery grips. It also has mounting points to attach just about anything. It comes with 2 black 3.5" rods.

The DSLR Base Plate can accommodate 15mm rods on all 4 sides. On the front are 2 levels for rods. The top is for mounting follow focuses, matte boxes, zoom/focus motors and lens support if space allows. The bottom rods are primarily used for lens support and single or double hand grips. These rods can be locked via allen screw so as to not come loose if using only one side for a single hand grip. The rear rod holes are for rod extensions to support battery power, wireless plates, monitors and numerous other accessories that you may need when in a tripod configuration. The rod holes on the left and right sides are for mounting the gunstock and the offset shoulder pad and counterweight for hand held use. Also mounted on these side rods can be a top handle, monitor arms and the cage which would use both sides at the same time.

On the bottom of the DSLR Base plate are your standard ¼ 20 and 3/8 16 mounting holes for tripods, mono pods, steadicams, etc. The top plate is a quick release plate that with a twist of the red knob lifts straight up and off separating your DSLR with the Z-finder attached, from the rest of your rig. The red knob also gives you left/right movement to adjust the lens position. On the front of the base plate between the rods are 2 allen screws that are used to adjust the top plate vertically. The vertical adjustment is to adjust for different camera body sizes and maintain the proper lens height.

See customer reviews here!

Our price: $420.00

Amount:

#577

Target Shooter

The Target Shooter is our lightest kit. It has three points of contact by having both hands on the camera and the gunstock in your chest. The entire kit is infinitely adjustable and made with all black rods! You can add a fourth point of contact by adding one of our Z-Finders to the kit.

See customer reviews here!

Our price: $475.00

Amount:

#576

Striker

The Striker is light and easy to handle. It has three points of contact by having one hand on the handgrip, the gunstock in your chest and your focusing hand on the lens. The entire kit is infinitely adjustable and now made with all black rods! You can add a fourth point of contact by adding one of our Z-Finders to the kit.

The Zacuto Gorilla plate attaches to the bottom of your camera using the standard tripod screw hole. The Gorilla plate has a 15mm hole in the bottom which allows you to attach the main rod for the Striker rig. The rig can be freed from the Gorilla plate by flipping the red lever. A tripod plate can be installed on the Gorilla plate for quickly moving from handheld to tripod.

See customer reviews here!

Our price: $855.00

Amount:

#626

EVF Snap

The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.

The EVF snap is our standard EVF that has the Zacuto Z-Finder Frame built into the unit. The Z-Finder Pro or Jr. snap on and off of the monitor. You can use the EVF as a small on-board monitor or as an EVF alone.

See more info and pics here!

See customer reviews here!

Our price: $675.00

Amount:

#627

EVF Flip

The Zacuto EVF is a 3.2” high resolution monitor that is used in conjunction with all the Z-Finder models. The EVF is compatible with all cameras that have an HDMI output including the Panasonic AF-100, Sony F3, RED ONE, RED Scarlet and RED Epic. The EVF allows you to operate the DSLR camera or any camera with an HDMI port, with the correct form factor for video with the camera "in-line" to your rod system (the most stable way) and your eye in the Z-Finder offset. This is the way all film cameras and ENG video cameras were operated and we, at Zacuto, believe this should be the way DSLR cameras should be operated. It will enhance the stability, give you better resolution, allow you to get your eye where it most comfortably needs to be, enable low mode shooting, shorten your camera package, have your EVF in the back of a dolly or crane, detached from the rig for car shots and more.

The EVF Flip has a Z-Finder frame built into the unit that can be flipped open to 180 degrees. You can also pop off the Z-Finder and use the EVF as a monitor similar to the EVF Snap. You can use the Z-Finder Pro or Jr. on this model as well. This is essential when working handheld with a producer or director so that you can show them the shot without having to have them get their eye in the viewfinder. You just flip up and they can see the shot!

See more info and pics here!

See customer reviews here!

Our price: $775.00

Amount:

#676

Sling Bracket

The Sling Bracket is the perfect mount for you if you already own part of an EVF mount such as the EVF Rod Mount, Standard Mount or Tri Mount. It mounts to the Gorilla Plate or Zacuto DSLR Baseplate using 2 allen screws, the same way the Z-Finder Frame mounts. The Sling Bracket allows you to attach any 15mm rod, Zamerican Articulating Arm, or EVF Pan and Tilt Mount (included with the EVF Rod Mount systems) to your Gorilla Plate or DSLR Baseplate. The Sling Bracket allows you to position your EVF at different angles so you can customize it to fit your shooting needs. This is a simple and elegant solution to mounting your EVF on a gorilla based system. If you need the entire kit check out the EVF Gorilla Plate Bracket.

Our price: $120.00

Amount:

Add Checked Items to Cart