|
#746 |
|
Doublemount and Red Plate
CLEARANCE
BIG SAVINGS!!
Was $365 now $225
LIMITED QUANTITIES
The Doublemount and Red plate combo allows you to mount your battery plate to your rod system horizontally. The DoubleMount includes 7" rods and can accept two Zround Mounts in the middle holes for mounting a Zacuto Articulating Arm. The Red Plate screws into the bottom of the Doublemount and allows you to mount a V-Mount or 3-Stud Anton Bauer battery plate. Now you can mount your professional brick style batteries to your rig horizontally for counterbalance. The Red Plate allows you to mount our Wireless Plate or Wireless Plate Pro to hold your wireless receivers. If you want to mount your pro batteries vertically, check out our Zwiss Plate.
Savings included in price below. Was $365 now $225.
Our price: $225.00 |
|
|
Amount: |
|
|
#194 |
|
Zround Mount
The Zround Mount is a retrofit to allow Zacuto DoubleMounts and MiniMounts to accept Z-Release Zamerican arm or ZUDS. ZUDs convert your 1/4 20", 3/8 16" screws to 15mm rods, thus allowing them to fit into Z-Mounts, 15mm Z-Locks, ZicroMounts and all other Zacuto 15mm locking devices. This gives quick release action to your Zacuto DoubleMount or MiniMount. The Zround Mount comes with a 3/8 16" and does not include DoubleMount, Zamerican arm or ZUD.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $120.00 |
|
|
Amount: |
|
|
#321 |
|
Zamerican, V3 Large
Zamerican, V3 Large 12 inch articulating arm is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk. The central red knob controls the central pivot point and the ball joints on either end of the arm.
Zacuto articulating arms end in threaded 15mm female rod ends. This ‘Z-Release’ technology allows you to use any of our Z-Release mounts to quick release between your accessories and the articulating arm. No more screwing and un-screwing and no more coming loose. Our Zacuto quick release red levers (often ratcheting levers) make set up and break down as well as quick moves on set a breeze.
You can see all our Z-Release mounts here.
Our price: $215.00 |
|
|
Amount: |
|
|
#355 |
|
Zicromount III
The ZicroMount III is used to mount any device with a ¼ 20” or a 3/816” inch (with a ¼ 20” to 3/8 16” adapter) screw hole. The Zicromount III is screwed into the bottom of the device such as a monitor and mounted to any 15mm rod, threaded articulating arm with Zacuto ZUDS or Zamerican Arm. The Zicromount III has the ability to attach to the device using two screws. The Zicromount III also has L shaped claws to prevent devices from turning and unwinding.
Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.
Our price: $92.00 |
|
|
| Camera Mounting Pin |
|
| 1/4 20 |
|
|
|
Amount: |
|
|
#631 |
|
Zwiss Plate
The Zacuto Zwiss Plate is Zacuto’s multi-purpose mounting plate. It allows you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. A second set of rods can be mounted through the top of the plate if you wish to extend your rig at another level. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate is also designed to work with our new Wireless Plate for mounting multiple wireless receivers.
You can use the Zwiss Plate to mount a variety of accessories or brick style batteries and battery plates. The Zwiss Plate works with both Anton Bauer 3-Stud and V-Mount style batteries. The battery plate and battery mounted on the Zwiss Plate can double as counterbalance. You can still add more counterbalance by adding our Z-Lite weights to the back of the rig along with the Zwiss Plate. Our Zamerican quick release arms mount directly into the 15mm holes of the plate and are perfect for mounting lights, monitors and audio devices. It now comes with the (4) screws needed to mount the AJA Ki Pro Mini. With plenty of ¼ 20” and 3/8 16” holes, your mounting options are limitless.
Our price: $149.00 |
|
|
Amount: |
|
|
#642 |
|
Wireless Plate Pro
The Zacuto Wireless Plate Pro allows you to mount any size wireless, down-converter, video transmitter regardless of size, make, model or manufacturer with Velcro.
The Wireless plate can screw into the Zacuto Zwiss Plate, Zacuto Red Plate or can mount off a 15mm rod by using a Wireless bracket and a z-lock.
The Wireless Plate Pro is 3 5/8 x 3 5/8. The lip sticks out 1 3/8.
Our price: $55.00 |
|
|
Amount: |
|
|
|
