DEMO Zwiss Plate

#697

DEMO Zwiss Plate

This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.

The Zacuto Zwiss Plate is Zacuto’s multi-purpose mounting plate. It allows you to mount articulating arms, rods, batteries, converter boxes and various other camera accessories to your support system. Unlike other cheese plates, the Zwiss Plate has two sets of industry standard 15mm rod holes spaced 60mm apart. This allows vertical mounting onto standard 15mm rods. A second set of rods can be mounted through the top of the plate if you wish to extend your rig at another level. The red levers enable you to securely mount the plate onto your rods. The Zwiss Plate is also designed to work with our new Wireless Plate for mounting multiple wireless receivers.

You can use the Zwiss Plate to mount a variety of accessories or brick style batteries and battery plates. The Zwiss Plate works with both Anton Bauer 3-Stud and V-Mount style batteries. The battery plate and battery mounted on the Zwiss Plate can double as counterbalance. You can still add more counterbalance by adding our Z-Lite weights to the back of the rig along with the Zwiss Plate. Our Zamerican quick release arms mount directly into the 15mm holes of the plate and are perfect for mounting lights, monitors and audio devices. It now comes with the (4) screws needed to mount the AJA Ki Pro Mini. With plenty of ¼ 20” and 3/8 16” holes, your mounting options are limitless.

Our price: $115.00

#36

Anton Bauer 3-Stud Battery Plate

The 3-stud battery plate allows you to mount Anton Bauer batteries underneath the Zacuto Red plate, which allows you to supply power to your external devices, like an on-board monitor. This Gold Mount is similar to the QR-GOLD, but is approximately 3/4" smaller (4.7" x 3.0" x 0.5" thick) which makes it ideal for mounting to small devices. Due to its smaller design, the QRC-DIGITAL must be mounted with its top edge flush with one edge of the equipment on which it is installed.

This plate mounts to the Zacuto Zwiss Plate.

Our price: $125.00

#35

V-Mount Battery Plate

Switronix V-Mount Battery Plate accepts v-mount type batteries and mounts to the Zacuto Zwiss Plate or Red Plate. The V-mount battery plate has one p-tap output and allows for one battery to be mounted to power your external devices.

Our price: $125.00

#30

Universal Baseplate, V3, includes 12-inch rods

The Universal Baseplate works with all cameras, including Panasonic HVX200, DVX100a/b,AF-100 Canon XL-H1, XL1, XL1s, XL2, GL2, XH-A1 Sony XDCAM EX1 EX3, Sony F3, Sony NEX-FS100*, SO-HVR-Z1U, VX1000, VX2000, PD-150, PD-170, JVC GY-HD100U,HD200U, HD250U, Silicon Imaging SI2K, RED ONE and any other cameras of this size.

Zacuto Universal Baseplate includes 12-inch rods and works and allows mounting accessories off the front and the back of the rods.

Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.

See customer reviews here!

*If using an FS100 with a matte box, a Z-Spacer or Quick-Release Plate is needed to raise the camera to the propert height needed.

Our price: $560.00

#572

DSLR Baseplate

Your Zacuto DSLR Base Plate is a highly configurable base plate which is adjustable to accommodate tall and short body cameras and cameras with battery grips. It also has mounting points to attach just about anything. It comes with 2 black 3.5" rods.

The DSLR Base Plate can accommodate 15mm rods on all 4 sides. On the front are 2 levels for rods. The top is for mounting follow focuses, matte boxes, zoom/focus motors and lens support if space allows. The bottom rods are primarily used for lens support and single or double hand grips. These rods can be locked via allen screw so as to not come loose if using only one side for a single hand grip. The rear rod holes are for rod extensions to support battery power, wireless plates, monitors and numerous other accessories that you may need when in a tripod configuration. The rod holes on the left and right sides are for mounting the gunstock and the offset shoulder pad and counterweight for hand held use. Also mounted on these side rods can be a top handle, monitor arms and the cage which would use both sides at the same time.

On the bottom of the DSLR Base plate are your standard ¼ 20 and 3/8 16 mounting holes for tripods, mono pods, steadicams, etc. The top plate is a quick release plate that with a twist of the red knob lifts straight up and off separating your DSLR with the Z-finder attached, from the rest of your rig. The red knob also gives you left/right movement to adjust the lens position. On the front of the base plate between the rods are 2 allen screws that are used to adjust the top plate vertically. The vertical adjustment is to adjust for different camera body sizes and maintain the proper lens height.

See customer reviews here!

Our price: $420.00

#321

Zamerican, V3 Large

Zamerican, V3 Large 12 inch articulating arm is 20% lighter than our first articulating arm. It is made with chrome balls for silk movement, aluminum ends for rust reduction and stainless steel to increase strength and reduce bulk.

Designed and manufactured by Zacuto. Made in the USA. Zacuto lifetime warranty.

Our price: $215.00

#439

V-Mount Power Kit

The Switronix V-Mount Power Kit made exclusively for Zacuto includes (2) XP-L90S V-Mount Batteries, a GP-TS V-Mount hotswap double battery mount, and a GP-2LS V-Mount dual battery charger. The V-Mount hotswap battery mount must mount to the GP-S-ZAC V-Mount battery plate in order to use. The GP-S-ZAC V-Mount battery plate is made to screw into the Zacuto Red Plate.

If you do not already own a single v-mount battery plate, please add the GP-S-ZAC to your kit below.

This kit can power all of your accessories with the necessary cables.

Our price: $1,100.00

#642

Wireless Plate Pro

The Zacuto Wireless Plate Pro allows you to mount any size wireless, down-converter, video transmitter regardless of size, make, model or manufacturer with Velcro.

The Wireless plate can screw into the Zacuto Zwiss Plate, Zacuto Red Plate or can mount off a 15mm rod by using a Wireless bracket and a z-lock.

The Wireless Plate Pro is 3 5/8 x 3 5/8. The lip sticks out 1 3/8.

Our price: $55.00

#283

28" P-Tap to XLR Cable

P-Tap Male to 4-pin XLR Female. 28" Long. Compatible with the Sony F3 Camera.
This cable also allows you to power anything that takes a 4-pin with a brick style pro battery or anything with a p-tap. This includes monitors, lights, sound devices, and cameras.

Our price: $35.00

#682

DV/HDV Camcorder Cable

The new XP model DV/HDV cables are the most versatile cables on the market. The XP model cables can be used wth a Switronix accessory or used solo with a PRO-X series lithium-ion battery product. The cable features a regulated 7.4v battery paddle end for an HDV/DV camcorder with an inline female Ptap connector for 12vdc, housed in an enclosure. Also includes both red and green LED indication to display status of battery power.

This cable is compatible with the following cameras:
Sony FS100, Z7U, HD1000U, V1U, Z1U, FX1, VX2000/2100, PD100/150/170

You can find the Sony F3 compatible cable here.

Our price: $109.95