|
#693 |
|
DEMO Z-Finder Mounting Frame for Tall DSLR Bodies
LIMITED QUANTITIES!
Full Price $95 DEMO Price $70
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV and Nikon D3s.
Our price: $70.00 |
|
|
Amount: |
|
|
#567 |
|
Gorilla Plate
The Gorilla Plate is used in both of our Gorilla Kits (Striker and Target Shooter) and must be used with the Z-Finder Pro.
The Z-Finder V2 will also work with this plate! You must also purchase a frame to mount your V2 onto the Gorilla Plate. The Gorilla plate attaches to your camera using the standard tripod screw hole. You can also mount your tripod plate underneath the Gorilla plate so you can quickly go from handheld to tripod use. For mounting the Gorilla plate to the tripod, it has (2) ¼ 20” screw holes and a locking pin hole. The Z-Finder frame attaches to the Gorilla plate using two thumb screws.
The thumb screws and slider are not included with the Gorilla Plate; they are included with the Z-Finder Frames. The frame can be removed by loosening the thumb screws and pulling up on the frame.
Our price: $69.00 |
|
|
| Gorilla Plate Adapter: |
|
|
|
Amount: |
|
|
#569 |
|
Z-Finder 3" Mounting Frame for Small DSLR Bodies with Battery Grips
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.
Please Note: This frame DOES NOT WORK with 3rd party battery grips.
Our price: $120.00 |
|
|
Amount: |
|
|
#568 |
|
Z-Finder 3" Mounting Frame for Small DSLR Bodies
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with 3" screens and no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D Canon 60D, Nikon D90, Nikon D300, D7000 and other cameras of the same size.
This frame is not compatible with the D800 or 5D Mark III. A frame for the MIII and D800 is available here!
Our price: $50.00 |
|
|
Amount: |
|
|
#577 |
|
Target Shooter
The Target Shooter is our lightest kit. It has three points of contact by having both hands on the camera and the gunstock in your chest. The entire kit is infinitely adjustable and made with all black rods! You can add a fourth point of contact by adding one of our Z-Finders to the kit.
The Target Shooter is compatible with the new Blackmagic Camera!
See customer reviews here!
Our price: $475.00 |
|
|
Amount: |
|
|
#565 |
|
Z-Finder Pro 2.5x
The Z-Finder Pro 2.5x is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 2.5x comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3” LCD screens. (A 3.2” version is available.) The diopter allows you to dial in the focus to match your eye.
The 2.5x magnification is recommended in particular for users who are near sighted and may have problems seeing long distances. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). Users with 20/20 vision can use either magnification. It is a personal preference. This is the model we use with our electronic viewfinder packages. Your camera model is irrelevant when choosing between the 2.5x and 3x magnifications. If you are particularly far sighted (wear strong reading glasses) or are just looking for the biggest magnification possible we recommend the Z-Finder Pro 3x.
This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. A 2.5x Z-finder packaged with a 3.2in frame for the MIII and D800 is available here! A la carte 3.2in and 3in Z-finder frames can be found here.
Our price: $395.00 |
|
|
| Gorilla Plate Adapter |
|
|
|
Amount: |
|
|
#566 |
|
Z-Finder Pro 3x
The Z-Finder Pro 3x is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 3x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 3x comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3” LCD screens. (A 3.2” version is available.) The diopter allows you to dial in the focus to match your eye.
The 3x magnification is recommended in particular for users who are farsighted and may have problems seeing up close. If you wear strong reading glasses this is the model for you! The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). Users with 20/20 vision can use either magnification. It is a personal preference. Your camera model is irrelevant when choosing between the 2.5x and 3x magnifications. If you are particularly nearsighted and have problems seeing distances or are just looking for a smaller magnification we recommend the Z-Finder Pro 2.5x. Farsighted users can still use the 2.5x model with the addition of the included Extender Frames.
This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. A 3x Z-finder packaged with a 3.2in frame for the MIII and D800 is available here! A la carte 3.2in and 3in Z-finder frames can be found here.
Our price: $395.00 |
|
|
| Gorilla Plate Adapter |
|
|
|
Amount: |
|
|
|
