|
#696 |
|
DEMO Target Shooter
This is a DEMO open box item. It may have scratches, dents, small blemishes or other cosmetic defects but is still in complete working condition. This item still holds our lifetime repair warranty.
The Target Shooter is our lightest kit. It has three points of contact by having both hands on the camera and the gunstock in your chest. The entire kit is infinitely adjustable. You can add a fourth point of contact by adding one of our Z-Finders to the kit.
See customer reviews here!
Our price: $350.00 |
|
|
Amount: |
|
|
#566 |
|
Z-Finder Pro 3x
The Z-Finder Pro 3x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 3x focusable magnification (2.5x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.
This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. A D4 and 1DX frame will be available soon. A 3x Z-finder packaged with a 3.2in frame for the MIII and D800 is available here!
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $395.00 |
|
|
| Gorilla Plate Adapter |
|
|
|
Amount: |
|
|
#564 |
|
Z-Finder Jr.
The Z-Finder Jr. is one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification, a 40mm diameter Zacuto optical designed lens, an eyecup preventing extraneous light leakage, and a field of view perfectly matched to 3” LCD screens. The Z-Finder Jr. does not have a diopter instead it uses Z-Finder Extender Frames to adjust the focal point. The Z-Finder Extender Frames attach to the skirt of the Z-Finder Jr. and allow you to semi-permanently stack the frames until the LCD screen is in focus for you.
The Z-Finder Jr. uses a mounting bracket that must be sandwiched in between a tripod plate and the camera. The bracket mounts to the ¼ 20” screw on your tripod plate and the actual Jr. is held in place with pressure from the fork of the bracket it sits in. You also have the option to mount the Z-Finder Jr. using the Z-Finder Mounting Frame (snap fit adhesive mounting frame) which is also included.
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $265.00 |
|
|
Amount: |
|
|
#576 |
|
Striker
The Striker is light and easy to handle. It has three points of contact by having one hand on the handgrip, the gunstock in your chest and your focusing hand on the lens. The entire kit is infinitely adjustable and now made with all black rods! You can add a fourth point of contact by adding one of our Z-Finders to the kit.
The Zacuto Gorilla plate attaches to the bottom of your camera using the standard tripod screw hole. The Gorilla plate has a 15mm hole in the bottom which allows you to attach the main rod for the Striker rig. The rig can be freed from the Gorilla plate by flipping the red lever. A tripod plate can be installed on the Gorilla plate for quickly moving from handheld to tripod.
See customer reviews here!
Our price: $855.00 |
|
|
Amount: |
|
|
#574 |
|
Cross Fire
The Cross Fire is a unique kit as it is the Single Action kit and Striker kit combined. It comes with all block rods. The Cross Fire uses the expandable DSLR baseplate so this kit can easily be upgraded from a simple point of contact kit like the Striker Kit to a full shoulder mounted system like the Fast Draw. This kit works on any DSLR camera with or without battery grips as it is infinitely adjustable in height.
The baseplate attaches to your tripod plate using the standard tripod plate screws, (2) ¼ 20” and (1) 3/8 16”. Your camera can also be quickly released from the rig by turning the red knob then pulling up on your camera. The camera quick release plate stays mounted to your camera so you can quickly switch between using the camera as part of a rig or on its own. You can easily add the optional Z-Finder Pro, DSLR optical viewfinder, by attaching the Z-Finder Mounting Frame (included with the Z-Finder Pro) to the camera quick release plate using two thumb screws.
See customer reviews here!
Our price: $2,256.25 |
|
|
Amount: |
|
|
#565 |
|
Z-Finder Pro 2.5x
The Z-Finder Pro 2.5x is another one of Zacuto’s Optical Viewfinders that allows DSLR cameras to have the correct form factor for video. It offers 2.5x focusable magnification (3x is available),a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3” LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted.
This frame is not compatible with the D800, D4, 1DX, or 5D Mark III. A D4 and 1DX frame will be available soon. A 2.5x Z-finder packaged with a 3.2in frame for the MIII and D800 is available here!
See customer reviews here!
Can't decide which Z-finder to buy? Check out our reference chart here!
Our price: $395.00 |
|
|
| Gorilla Plate Adapter |
|
|
|
Amount: |
|
|
#567 |
|
Gorilla Plate
The Gorilla Plate is used in both of our Gorilla Kits (Striker and Target Shooter) and must be used with the Z-Finder Pro.
The Z-Finder V2 will also work with this plate! You must also purchase a frame to mount your V2 onto the Gorilla Plate. The Gorilla plate attaches to your camera using the standard tripod screw hole. You can also mount your tripod plate underneath the Gorilla plate so you can quickly go from handheld to tripod use. For mounting the Gorilla plate to the tripod, it has (2) ¼ 20” screw holes and a locking pin hole. The Z-Finder frame attaches to the Gorilla plate using two thumb screws.
The thumb screws and slider are not included with the Gorilla Plate; they are included with the Z-Finder Frames. The frame can be removed by loosening the thumb screws and pulling up on the frame.
Our price: $69.00 |
|
|
| Gorilla Plate Adapter: |
|
|
|
Amount: |
|
|
#571 |
|
Z-Finder Storage Case
The Z-Finder Storage Case is compatible with all Z-Finder models. It is a black bag with an embroidered Zacuto logo. It closes using Velcro. It can also attach to a belt to wear around your waist. This bag is sure to keep your Z-Finder clean and safe in your camera bags. The dimensions are: 8x5x4 inches.
Our price: $23.00 |
|
|
Amount: |
|
|
#584 |
|
From Still to Motion: A Photographer's guide to creating video with your DSLR
From Still to Motion is a all around guide to shooting video with your DSLR. Professional photographers are evolving and adding video to their list of offerings to clients. Driving the evolution is the need for competitive advantage and creative exploration. With the addition of high definition video capabilities to the latest batch of DSLR cameras, photographers have a convenient and familiar tool to fully embrace the new world of video. But video is very different than photography, with new challenges and technology to master.
Our price: $42.00 |
|
|
Amount: |
|
|
#569 |
|
Z-Finder 3" Mounting Frame for Small DSLR Bodies with Battery Grips
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off.
Please Note: This frame DOES NOT WORK with 3rd party battery grips.
Our price: $120.00 |
|
|
Amount: |
|
|
#570 |
|
Z-Finder 3" Mounting Frame for Tall DSLR Bodies
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure.. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the taller body cameras such as the Canon 1D Mark IV and Nikon D3s with 3" screens.
This frame is not compatible with the D4 or 1DX. We will have frames for these cameras by the end of June 2012.
Our price: $95.00 |
|
|
Amount: |
|
|
#568 |
|
Z-Finder 3" Mounting Frame for Small DSLR Bodies
The Z-Finder Aircraft Aluminum Frame must be used in conjunction with the Gorilla plate. The Z-Finder frame attaches to the Gorilla plate with two thumb screws; the Gorilla plate is attached to the bottom of your camera. The frame has a rubber coating on the end which stays against the LCD screen with pressure. The connection between the Z-Finder and frame is a snap fit. The Z-Finder snaps into the frame and can quickly snap off for going between video and photos. To release the frame from your camera, you must un-do the thumb screws and slide the frame off. This frame is used on the small body cameras with 3" screens and no battery grips such as the Canon 5D Mark II, Canon 7D, Canon 550D Canon 60D, Nikon D90, Nikon D300, D7000 and other cameras of the same size.
This frame is not compatible with the D800 or 5D Mark III. A frame for the MIII and D800 is available here!
Our price: $50.00 |
|
|
Amount: |
|
|
#614 |
|
Jumper
The Jumper is an accessory for customers who already own Zacuto’s DSLR Baseplate, or a kit that contains the DSLR baseplate, and would like to have Gorilla Kit run n gun capabilities. The Jumper attaches to the wedge on the top quick-releasable portion of the DSLR Baseplate. You can then mount a vertical rod via the Jumper’s 15mm hole to create a kit like the Target Shooter or Striker.
Our price: $65.00 |
|
|
Amount: |
|
|
#666 |
|
EVF Gorilla Plate Bracket
The EVF Gorilla Plate Bracket is used to mount the EVF onto any of the Zacuto Gorilla Kits that use a Gorilla Plate. It can also be used to mount the EVF onto the DSLR Baseplate. The EVF Gorilla Plate Bracket includes a "sling" bracket which mounts to the Gorilla Plate or DSLR Baseplate using the two allen screws that also attach the red thumb screw block to the plates. (If you are familiar with mounting the Z-Finder Frame on the Gorilla Plate or DSLR Baseplate, the sling bracket is mounted the same way). At the end of the sling bracket is a Z-Mount Zwivel which allows you to attach the EVF Pan and Tilt Mount (included). The Z-Mount Zwivel gives you the ability to position the EVF in a few different ways. Attached to the EVF Pan and Tilt Mount is the ZicroMini. The ZicroMini then attaches to the bottom of EVF with its 1/4" 20 screw. This allows you to quickly release your EVF frmo the mount with the flip of a lever.
Also, if you are looking to use the Zacuto Pincher (Universal mini hdmi cable restraint relief - shown in detailed pictures), it will mount onto this bracket.
If you are looking to mount the EVF to another manufacturer's rig or standard 15mm rod, check out the EVF Rod Mount.
Note: Must have Gorilla Plate or DSLR Baseplate for this bracket to work.
Our price: $240.00 |
|
|
Amount: |
|
|
|
